Pre-Orders

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window  More Information Item # 11003 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name BNSF Railway Road Number 8268 MSRP $169.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window  More Information Item # 21004 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name BNSF Railway Road Number 8255 MSRP $229.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: Low headlight HTCR-1a trucks Nose door with window  More Information Item # 21003 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name BNSF Railway Road Number 8252 MSRP $229.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window  More Information Item # 11002 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name Santa Fe Road Number 222 MSRP $169.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service with BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window  More Information Item # 11001 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Standard DC Road Name Santa Fe Road Number 203 MSRP $169.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window  More Information Item # 21001 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name Santa Fe Road Number 202 MSRP $229.98

Read more less

$0.00 Pre-Order | Estimated delivery Fall 2024Guaranteed Pre-Order Due Date: May 30, 2024   Bring big power to your HO railroad with the WalthersMainline SD75M! Built from 1995 to 1996 at the request of the Santa Fe for a higher horsepower unit (4300 versus 4000 for a standard SD70), most were later transferred to the new Burlington Northern & Santa Fe Railway following the 1995 merger, where many are still in service for BNSF. These units were built with the wide North American Safety Cab, thus the "M" (for "modified") in the model designation. Other features include: One time run of these roadnumbers, order now - limited quantity available! Correct North American Safety Cab per prototype Flush radiators per early production units Correct HTCR-1a or HTCR-1b trucks per prototype Brass Nathan K5 air horn Treadplate detail on walkways Minimum radius 18" (22" or larger recommended) Fully assembled LED Lighting includes: High or low headlight per prototype Improved, working front ditch lights Constant and directional lights Available with ESU Sound & DCC for DCC or DC powered layouts with: Four air horns changeable by CVs: K5LAR24 P5R24 K3LA2 K3L 2 Bells changeable by CVs: Graham E-bell Steel Bell 21-Pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die cast metal chassis Cab interior 5000-gallon fuel tank w/road specific details Standard bell on conductor's side Molded drill starter points for grab irons - easily added with SD70-Series Diesel Detail Kit (910-261, sold separately) Correct size RP-25 metal wheels Proto MAX(TM) magnetic metal knuckle couplers  PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Road-specific details on this model include: High headlight HTCR-1a trucks Nose door with window  More Information Item # 21002 Brand WalthersMainline Scale HO Type EMD SD75M Engine Electronics Sound & DCC Road Name Santa Fe Road Number 209 MSRP $229.98

Read more less

$0.00 Pre-Order | Estimated delivery Summer 2024Guaranteed Pre-Order Due Date: February 28, 2024 Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of EMD F7 A units set-up for passenger service, prompting EMD to rollout the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound & DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear More Information Item # 920-49561 Brand WalthersProto Scale HO Engine Electronics DC, DCC Ready Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6459 Estimated Release Date Summer 2024

Read more less

$0.00 Pre-Order | Estimated delivery Summer 2024Guaranteed Pre-Order Due Date: February 28, 2024 Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear The F7B features: Working back-up light on both ends Lifting lugs on both ends Partial body skirt  More Information Item # 920-49559 Brand WalthersProto Scale HO Engine Electronics DC, DCC Ready Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6451 & 8302 Estimated Release Date Summer 2024

Read more less

$0.00 Pre-Order | Estimated delivery Summer 2024Guaranteed Pre-Order Due Date: February 28, 2024 Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheelsets Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear The F7B features: Working back-up light on both ends Lifting lugs on both ends Partial body skirt   More Information Item # 920-49558 Brand WalthersProto Scale HO Engine Electronics DC, DCC Ready Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6448 & 8298 Estimated Release Date Summer 2024

Read more less

$0.00 Pre-Order | Estimated delivery Summer 2024Guaranteed Pre-Order Due Date: February 28, 2024 Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear The F7B features: Working back-up light on both ends Lifting lugs on both ends Partial body skirt More Information Item # 920-42561 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6457 Estimated Release Date Summer 2024

Read more less

$0.00 Pre-Order | Estimated delivery Summer 2024Guaranteed Pre-Order Due Date: February 28, 2024 Great for railroads that preferred four-axle diesels for their passenger runs, prototypes for the WalthersProto EMD FP7 came equipped with more boiler water capacity on their stretched chassis. Providing enough steam to power train heat and some air conditioning systems on postwar trains taxed the standard water supply of standard EMD F7 A units set-up for passenger service, prompting EMD to roll out the new FP7 in 1949. Though outwardly similar to the F7A, FP7s were actually four feet longer to accommodate bigger water tanks with a capacity of 950 US gallons. Standard passenger power into the Amtrak era and beyond (with some also handling freight chores), these WalthersProto HO EMD FP7 replicas are fully assembled and ready for service with: One time run of these roadnumbers, order now - limited quantity available! Matches the prototypes' extended frame and body Available with ESU LokSound 5 Sound and DCC for DCC and DC layouts Railroad-specific details Five-pole, skew-wound, high-torque, high-efficiency can motor Helical gears with 14:1 ratio for smooth, ultra-quiet running Easy multiple-unit operation Correct RP-25 wheels Proto MAX(TM) magnetic metal knuckle couplers Finished in the later gray and red scheme, these HO WalthersProto replicas feature: Nathan M-5 air horn Whip-type radio antenna with conduit SP-style snowplow pilot Upper headlight with twin sealed-beam (operating) and red emergency (UDE) lights (nonworking) Working rear back-up light Frame-mounted equipment box Rooftop photo-etched icicle breakers front and rear The F7B features: Working back-up light on both ends Lifting lugs on both ends Partial body skirt More Information Item # 920-42559 Brand WalthersProto Scale HO Engine Electronics DC, DCC & Sound Type EMD Diesel Road Name Southern Pacific(TM) Road Number 6450 & 8301 Estimated Release Date Summer 2024

Read more less