$10 to $25

46 products


  • Kadee 13 | Coupler Sample Test Kit | HO Scale

    Kadee Kadee 13 | Coupler Sample Test Kit | HO Scale

    1 in stock

    The sample test kit contains a variety of sample couplers and other necessary components to identify and properly install KadeeĀ® couplers on locomotives & rolling stock. Without having to purchase full size packages of Couplers, Gear Boxes & Adaptors, Springs, Washers, & Shims that may be necessary for the Coupler Conversions.Contains: HO-Scale Conversion list, 20 & 30 Series Instructions, Whisker Coupler Instructions & sample size packages of products listed below.Couplers - MetalNO.5Ā® Medium Centerset - Metal - One Pair141 WhiskerĀ® Long Underset - Metal - One Pair142 WhiskerĀ® Medium Overset - Metal - One Pair143 WhiskerĀ® Short Centerset - Metal - One Pair144 WhiskerĀ® Short Underset - Metal - One Pair145 WhiskerĀ® Short Overset - Metal - One Pair146 WhiskerĀ® Long Centerset - Metal - One Pair147 WhiskerĀ® Medium Underset - Metal - One Pair148 WhiskerĀ® Medium Centerset - Metal - One Pair149 WhiskerĀ® Long Overset - Metal - One Pair158 WhiskerĀ® "Scale" Medium Centerset - Metal - One PairCouplers - Plastic21/31 Long Underset - Plastic - One Pair22/32 Medium Overset - Plastic - One Pair23/33 Short Centerset - Plastic - One Pair24/34 Short Underset - Plastic - One Pair25/35 Short Overset - Plastic - One Pair26/36 Long Centerset - Plastic - One Pair27/37 Medium Underset - Plastic - One Pair28/38 Medium Centerset - Plastic - One Pair29/39 Long Overset - Plastic - One PairGear Boxes & Adaptors212 Talgo Truck Adaptors: - One SprueWork with all Couplers included in Test Kit and are standard with 20-Series couplers.213 20-Series Gear Box with Sleeves: - One SprueWork with all Couplers included in Test Kit and are standard with 20-Series couplers.232 NO.5Ā® Type Gear Box: - One SprueWork with all Couplers included in Test Kit and are standard with NO.5Ā® couplers & 20-Series couplers.233 30-Series Gear Box: - One SprueWork with all Couplers included in Test Kit Except WhiskerĀ® Couplers and are standard with 30-Series couplers.234 Short NO.5Ā® Type Gear Box: - One SprueWork with all Couplers included in Test Kit and are standard with short shank 20-Series & 40-Series couplers.242 WhiskerĀ® Snap-Together Gear Box: - One SprueWork with all Couplers included in Test Kit and are standard with WhiskerĀ® couplers.252 Small WhiskerĀ® Snap-Together Gear Box: - One SprueWork with Only WhiskerĀ® Couplers. The 252 is the WhiskerĀ® equivalent to the 30-Series Gear Box.Screws, Springs, Washers, & Shims208 .015" Red Fiber Washer - 10 Each209 .010" Gray Fiber Washer - 10 Each211 .010" & .015" Shims - 10 Each256 Plastic 2-56 x 1/2" Screws - 10 Each621 30-Series Torsion Spring - 10 Each622 Knuckle Springs - 10 Each634 NO.5Ā® Type Centering Spring - 10 EachUncouplers321 Code 100 Between-The-Rails - One Pair322 Code 83 Between-The-Rails - One PairTools231 Greas-em - One Each206 Coupler Height Gauge - One Each241 Dual Tool - One Each HO-Scale

    1 in stock

    $33.59

  • Kadee 321 | Between-the-Rails Code 100 Delayed-Action Magnetic Uncoupler | HO Scale Kadee 321 | Between-the-Rails Code 100 Delayed-Action Magnetic Uncoupler | HO Scale

    Kadee Kadee 321 | Between-the-Rails Code 100 Delayed-Action Magnetic Uncoupler | HO Scale

    2 in stock

    #321 Between-the-Rails Code 100 Delayed-Action Magnetic Uncoupler - HO Scale Place this handy "delayed-action" Uncoupler anywhere on a straight track segment between-the-rails. Ready to mount on top of ties with Code 100 rail. Cut out ties if mounting Code 83, 70, 55 or 40 rail. Track not included Use the #334 Uncoupler Gluing Jig to aid in the precision installation of #312, #321 & #322 Uncouplers in track. Package Includes: (1) each #321 Between-the-Rails Code 100 Delayed-Action Magnetic Uncoupler

    2 in stock

    $5.99

  • Kadee 147 | 140-Series WhiskerĀ® Metal Couplers with Gearboxes - Medium (9/32") Underset Shank | HO Scale Kadee 147 | 140-Series WhiskerĀ® Metal Couplers with Gearboxes - Medium (9/32") Underset Shank | HO Scale

    Kadee Kadee 147 | 140-Series WhiskerĀ® Metal Couplers with Gearboxes - Medium (9/32") Underset Shank | HO Scale

    2 in stock

    This industry leading coupler features an all metal coupler head, shank, and WhiskerĀ® centering spring and comes complete with insulated draft gearbox and lid. The #147 Magne-MaticĀ® WhiskerĀ® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #27 coupler. HO-Scale Package Includes: (2) Pair #147 WhiskerĀ® Metal Couplers - Medium Underset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #147 WhiskerĀ® Metal Coupler Features: Material Ā -Ā Ā  Metal Shank Length Ā -Ā Ā Medium(9/32") (center hole to back of coupler head) Coupler Offset Ā -Ā Ā  Underset Knuckle Spring Ā -Ā Ā  #622 Centering System Ā -Ā Ā  WhiskerĀ® Head Ā -Ā Ā  Standard Head Works In Place of Ā -Ā Ā  #27, #37 (#147 in a #252 box), Medium Underset "clone" couplers Works With Ā -Ā Ā  #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material Ā -Ā Ā  Insulated Plastic Lid Type Ā -Ā Ā  Snap-Together Dimensions Ā -Ā Ā  7/16"L x 5/16"W x 1/8"H Works With Ā -Ā Ā  NO.5Ā®, #58, 20-Series and 40-Series, All WhiskerĀ® Couplers Mounting Specifications: Mounting Height Ā -Ā Ā  25/64" Centerline Ā -Ā Ā  25/64" Trip Pin Height Ā -Ā Ā  1/32" Center Hole Ā -Ā Ā Ā 2-56 Insulated ScrewsĀ are the most commonly used. (Screw length will vary) Recommended Tools: #206Ā Insulated Muti-Purpose Coupler Height Gauge #231Ā Greas-em Dry Graphite Lubricant #237Ā Coupler Trip Pin Pliers #240Ā Double Headed Pin Vise #241Ā Dual Tool Manual Uncoupling Tool and Spring Pick #246Ā Tap (2-56) and Drills (#50 and #43)

    2 in stock

    $4.75

  • Kadee 5 | (NO.5Ā®) Universal Metal Couplers with Gearboxes - Medium (9/32") Centerset Shank | HO Scale Kadee 5 | (NO.5Ā®) Universal Metal Couplers with Gearboxes - Medium (9/32") Centerset Shank | HO Scale

    Kadee Kadee 5 | (NO.5Ā®) Universal Metal Couplers with Gearboxes - Medium (9/32") Centerset Shank | HO Scale

    2 in stock

    This industry leading coupler features an all metal standard coupler, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The NO.5Ā® Magne-MaticĀ® Metal Coupler may be mounted with the included #232 Gearbox or with other manufacturers cast-on coupler pockets. The 148 WhiskerĀ® Coupler is equivalent to the NO.5Ā® Metal Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #28 coupler. HO-Scale Package Includes: (2) Pair NO.5Ā® Metal Couplers - Medium Centerset Shank (2) Pair #634 Centering Spring NO.5Ā® Style (2) Pair #232 Gearboxes (2) #622 Knuckle Springs NO.5Ā® Metal Coupler Features: Material Ā -Ā Ā  Metal Shank Length Ā -Ā Ā  Medium (9/32") (center hole to back of coupler head) Coupler Offset Ā -Ā Ā  Centerset Knuckle Spring Ā -Ā Ā  #622 Centering System Ā -Ā Ā  Standard Shank Centering Spring Ā -Ā Ā  #634 Centering Spring NO.5Ā® Style Head Ā -Ā Ā  Standard Head Works In Place of Ā -Ā Ā  #58, #28, #118, #119, #148, #158, most medium centerset "clone" couplers Works With Ā -Ā Ā  #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #232 Plastic Draft Gearboxes & Lids Features: Material Ā -Ā Ā  Insulated Plastic Dimensions Ā -Ā Ā  29/64"L x 19/64"W x 7/64"H Works With Ā -Ā Ā  NO.5Ā®, #58, 20-Series and all WhiskerĀ® Couplers Mounting Specifications: Mounting Height Ā -Ā Ā  29/64" Centerline Ā -Ā Ā  25/64" Trip Pin Height Ā -Ā Ā  1/32" Center Hole Ā -Ā Ā Ā 2-56 Insulated ScrewsĀ are the most commonly used. (Screw length will vary) Side Holes Ā -Ā Ā Ā 0-48 Self-TappingĀ orĀ 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206Ā Insulated Muti-Purpose Coupler Height Gauge #231Ā Greas-em Dry Graphite Lubricant #237Ā Coupler Trip Pin Pliers #240Ā Double Headed Pin Vise #241Ā Dual Tool Manual Uncoupling Tool and Spring Pick #246Ā Tap (2-56) and Drills (#50 and #43) #780Ā Tap (0-80) and Drills (#55 and #52)

    2 in stock

    $4.49

  • Kadee 533 | 33" Diameter Ribbed Back Metal Code 88 Semi-Scale Wheels - Freight and Passenger | HO Scale Kadee 533 | 33" Diameter Ribbed Back Metal Code 88 Semi-Scale Wheels - Freight and Passenger | HO Scale

    Kadee Kadee 533 | 33" Diameter Ribbed Back Metal Code 88 Semi-Scale Wheels - Freight and Passenger | HO Scale

    2 in stock

    #533 - 33" Diameter Ribbed Back Wheelsets (Code 88) - HO Scale Ribbed wheelsets are most commonly found on steam era rolling stock. KadeeĀ® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 88 (.088") 33" Ribbed Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #533 33" Diameter Ribbed Back Wheelsets (Code 88) Ā  The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

    2 in stock

    $9.70

  • Kadee 1020 | Coupler & Special Purpose Tweezers

    Kadee Kadee 1020 | Coupler & Special Purpose Tweezers

    1 review

    2 in stock

    Stainless Steel Coupler & Special Purpose TweezersNormally closed tweezers are that extra hand you need. The auto clamping design of these tweezers make holding small parts effortless. Ideal for assembly couplers and gearboxes.The notch end of the tweezers fits nicely over trip pin to hold coupler parts together and when used in conjunction with the KadeeĀ® Coupler Assembly Fixture. For use with HOn3 to On3 Scale Package Includes: (1) Coupler & Special Purpose Tweezers

    2 in stock

    $7.09

  • Kadee 156 | WhiskerĀ® Scale Metal Couplers with Gearboxes - Long (25/64") Centerset Shank | HO Scale Kadee 156 | WhiskerĀ® Scale Metal Couplers with Gearboxes - Long (25/64") Centerset Shank | HO Scale

    Kadee Kadee 156 | WhiskerĀ® Scale Metal Couplers with Gearboxes - Long (25/64") Centerset Shank | HO Scale

    2 in stock

    The #156 "Scale" All Metal Self-Centering WHISKERĀ® Coupler features a "Scale" Metal Coupler (a smaller head coupler which is more to scale and is patterned after the type 'E" couplers) & Metal WHISKERĀ® Centering Spring, insulated Draft Gear Box and Lid. The #156 Coupler may be mounted with the supplied #242 draft gear box, other KadeeĀ® HO-Scale draft gear box shown below or with the Manufacturers cast-on coupler pockets. The coupler will couple and uncouple with other KadeeĀ® HO and HOn3 couplers. The coupler has the same shank length as the #26, 36 or 46 coupler which will allow the modeler to remove the existing #26, 36 or 46 coupler and replace with the new smaller coupler. The #156 coupler is made of the same metal as the #46 for strength and rigidity. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox. Refer to our helpfulĀ Coupler Conversion ChartsĀ to determine the appropriate coupler to use on your model. HO-Scale Package Includes: (2) Pair #156 Scale WhiskerĀ® Metal Couplers - Long Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #625 Knuckle Springs #156 Scale WhiskerĀ® Metal Coupler Features: Material Ā -Ā Ā  Metal Shank Length Ā -Ā Ā Long (25/64") (center hole to back of coupler head) Coupler Offset Ā -Ā Ā Centerset Knuckle Spring Ā -Ā Ā  #625 Centering System Ā -Ā Ā  WhiskerĀ® Head Ā -Ā Ā  Scale Head Works In Place of Ā -Ā Ā  #26, #36 (#146 in a #252 box), long centerset "clone" couplers Works With Ā -Ā Ā  #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material Ā -Ā Ā  Insulated Plastic Lid Type Ā -Ā Ā  Snap-Together Dimensions Ā -Ā Ā  7/16"L x 5/16"W x 1/8"H Works With Ā -Ā Ā  NO.5Ā®, #58, 20-Series and 40-Series, All WhiskerĀ® Couplers Mounting Specifications: Mounting Height Ā -Ā Ā  25/64" Centerline Ā -Ā Ā  25/64" Trip Pin Height Ā -Ā Ā  1/32" Center Hole Ā -Ā Ā Ā 2-56 Insulated ScrewsĀ are the most commonly used. (Screw length will vary) Recommended Tools: #206Ā Insulated Muti-Purpose Coupler Height Gauge #231Ā Greas-em Dry Graphite Lubricant #237Ā Coupler Trip Pin Pliers #240Ā Double Headed Pin Vise #241Ā Dual Tool Manual Uncoupling Tool and Spring Pick #246Ā Tap (2-56) and Drills (#50 and #43)

    2 in stock

    $6.09

  • Kadee 146 | 140-Series WhiskerĀ® Metal Couplers with Gearboxes - Long (25/64") Centerset Shank | HO Scale Kadee 146 | 140-Series WhiskerĀ® Metal Couplers with Gearboxes - Long (25/64") Centerset Shank | HO Scale

    Kadee Kadee 146 | 140-Series WhiskerĀ® Metal Couplers with Gearboxes - Long (25/64") Centerset Shank | HO Scale

    2 in stock

    This industry leading coupler features an all metal coupler head, shank, and WhiskerĀ® centering spring and comes complete with insulated draft gearbox and lid. The #146 Magne-MaticĀ® WhiskerĀ® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #26 coupler. HO-Scale Package Includes: (2) Pair #146 WhiskerĀ® Metal Couplers - Long Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #146 WhiskerĀ® Metal Coupler Features: Material Ā -Ā Ā  Metal Shank Length Ā -Ā Ā  Long (25/64") (center hole to back of coupler head) Coupler Offset Ā -Ā Ā  Centerset Knuckle Spring Ā -Ā Ā  #622 Centering System Ā -Ā Ā  WhiskerĀ® Head Ā -Ā Ā  Standard Head Works In Place of Ā -Ā Ā  #26, #36 (#146 in a #252 box), long centerset "clone" couplers Works With Ā -Ā Ā  #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material Ā -Ā Ā  Insulated Plastic Lid Type Ā -Ā Ā  Snap-Together Dimensions Ā -Ā Ā  7/16"L x 5/16"W x 1/8"H Works With Ā -Ā Ā  NO.5Ā®, #58, 20-Series and 40-Series, All WhiskerĀ® Couplers Mounting Specifications: Mounting Height Ā -Ā Ā  29/64" Centerline Ā -Ā Ā  25/64" Trip Pin Height Ā -Ā Ā  1/32" Center Hole Ā -Ā Ā Ā 2-56 Insulated ScrewsĀ are the most commonly used. (Screw length will vary) Recommended Tools: #206Ā Insulated Muti-Purpose Coupler Height Gauge #231Ā Greas-em Dry Graphite Lubricant #237Ā Coupler Trip Pin Pliers #240Ā Double Headed Pin Vise #241Ā Dual Tool Manual Uncoupling Tool and Spring Pick #246Ā Tap (2-56) and Drills (#50 and #43)

    2 in stock

    $4.79

  • Kadee 511 | Bettendorf T-Section Trucks with 33" Ribbed Back Wheels - Metal Fully Sprung (HO Scale) Kadee 511 | Bettendorf T-Section Trucks with 33" Ribbed Back Wheels - Metal Fully Sprung (HO Scale)

    Kadee Kadee 511 | Bettendorf T-Section Trucks with 33" Ribbed Back Wheels - Metal Fully Sprung (HO Scale)

    1 in stock

    #511 Bettendorf T-Section Trucks with 33" Ribbed Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with a #2 or 2-56 screw.Mounting Screws not Included. The Bettendorf T-Section truck was introduced in the 1920's with a one piece cast sideframe. It had a life similar to the Andrews truck. HO-Scale Screws not includedĀ  Metal Fully Sprung Trucks Features: Code 110 (.110) #523 33" Ribbed Back Wheels Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs Patent number 5,768,999 Package Includes: (2) Each #511 Bettendorf T-Section Trucks (assembled) The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

    1 in stock

    $7.29

  • Kadee 33 | 30-Series Plastic Couplers with Gearboxes - Short (1/4") Centerset Shank Kadee 33 | 30-Series Plastic Couplers with Gearboxes - Short (1/4") Centerset Shank

    Kadee Kadee 33 | 30-Series Plastic Couplers with Gearboxes - Short (1/4") Centerset Shank

    1 review

    2 in stock

    This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #33 Magne-MaticĀ® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #143 WhiskerĀ® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #33 Coupler. The WhiskerĀ® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. Other WhiskerĀ® Coupler #33 equivalent options include #153 WhiskerĀ® "Scale" Metal Coupler when mounted a #252 Snap-together Gearbox. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Ā  Two pair per package Ā Ā Made in the U.S.A. HO-Scale Package Includes: (2) Pair #33 Plastic Shank Couplers - Short Centerset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #33 Plastic Coupler Features: Material Ā -Ā Ā  Metal Knuckle, Plastic Coupler Shank Shank Length Ā -Ā Ā  Short (1/4") (center hole to back of coupler head) Coupler Offset Ā -Ā Ā  Centerset Knuckle Spring Ā -Ā Ā  #622 Centering System Ā -Ā Ā  Standard Shank Centering Spring Ā -Ā Ā  #621 Torsion Centering Spring Head Ā -Ā Ā  Standard Head Works With Ā -Ā Ā  #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material Ā -Ā Ā  Insulated Plastic Dimensions Ā -Ā Ā  3/8"L x 5/16"W x 9/64"H Works With Ā -Ā Ā  NO.5Ā®, #58, 20-Series Couplers #33 in a #233 gearbox on top. Mounting Specifications: Mounting Height Ā -Ā Ā  1/2" Centerline Ā -Ā Ā  25/64" Trip Pin Height Ā -Ā Ā  1/32" Center Hole Ā -Ā Ā Ā 2-56 Insulated ScrewsĀ are the most commonly used. (Screw length will vary) #33 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height Ā -Ā Ā  29/64" Centerline Ā -Ā Ā  25/64" Trip Pin Height Ā -Ā Ā  1/32" Center Hole Ā -Ā Ā Ā 2-56 Insulated ScrewsĀ are the most commonly used. (Screw length will vary)

    2 in stock

    $3.99

  • Kadee 522 | 36" Diameter Smooth Back Metal Code 110 Wheels - Freight and Passenger | HO Scale Kadee 522 | 36" Diameter Smooth Back Metal Code 110 Wheels - Freight and Passenger | HO Scale

    Kadee Kadee 522 | 36" Diameter Smooth Back Metal Code 110 Wheels - Freight and Passenger | HO Scale

    2 reviews

    1 in stock

    #522 - 36" Diameter Smooth Back Wheelsets (Code 110) - HO Scale Smooth wheelsets are most commonly found on diesel era rolling stock. KadeeĀ® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 110 (.110") 36" Smooth Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #522 36" Diameter Smooth Back Wheelsets (Code 110) Ā  The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

    1 in stock

    $12.79

  • Kadee 262 | WhiskerĀ® Coupler Narrow Snap-Together Gearboxes & Lids | HO Scale Kadee 262 | WhiskerĀ® Coupler Narrow Snap-Together Gearboxes & Lids | HO Scale

    Kadee Kadee 262 | WhiskerĀ® Coupler Narrow Snap-Together Gearboxes & Lids | HO Scale

    1 in stock

    #262 HO Scale WhiskerĀ® Coupler Narrow Snap-Together Gearboxes & Lids Narrow Low Profile Snap-together Gearbox for WhiskerĀ® Couplers.(except #143, #144, #145 Short Standard Head WhiskerĀ® Couplers.) 2-56 screws are the most commonly used for center hole.Screw length will very depending on the mounting situation. 10 pair per package

    1 in stock

    $3.49

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account