$10 to $25

Foliage is excellent for making trees, vines, weeds, bushes or any low growth. Simply stretch the sheet of Foliage for a thin, lacy application. Attach to layout with Scenic Cement™. Create quick and economical tree masses on your layout. Stretch Foliage to desired density, then roll into a loose ball. Stretch the ball into a conical shape for variation. Attach to hillsides with Scenic Glue™. Model vines, weeds, low growth and trees Blends naturally with other foliage Colorfast For any scale 72 in3 (464 cm3)

Read more less

Use this product to model winter scenery on model railroads, dioramas, military models, school displays or where collectible houses are displayed. Model a light dusting of snow, heavy drifts or create frothy rapids on a water feature. Comes in a handy see-through, reusable Canister Shaker with a sprinkle/pour dual-purpose lid. Add snow to scenery For any scale 57.7 in3 (945 cm3)

Read more less

The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For N Scale models Dimensions: 4" x 7 3/4"

Read more less

This product is specifically designed to be used with DC and/or RailPro products. It cannot be used with DCC products. The AR-1 is used to power special configurations of track such as below. Track configuration like below would cause a short circuit if connected without the use of an AR-1. Note that if you follow Rail ’A’ around you will notice that it connects to Rail ‘B’! That is just like putting a piece of metal across Rail ’A’ and Rail ‘B’ which would cause a short circuit and would cause a power supply to shut down. The solution to power special track configurations like below is to add insulation gaps and power the sections with an AR-1. The AR-1 can also be used to isolate small sections of track, limiting the impact of short circuits if derailments occur to just one area of your layout. Features: All Solid State Design Simple Connection with Only 4 Wires No Adjustments Necessary Provides Short Circuit Isolation for a Section of Track Status Indicator Light Fast and Secure Spring Clamp Connecters Fully Enclosed Circuit Board Electronics Size: 4.60 x 3.00 x 1.18 inches Our all solid state design has many advantages over relay based designs. With the relay based designs we tested you could see the locomotive jerk when it crossed the gap at slow speeds. With our AR-1 we saw no visible change in speed at all! Further, compared to relay based designs, solid state units are far less likely to fail, switch many times faster and all without that annoying relay clicking sound.      

Read more less

RailPro products by Ring Engineering are professional grade, powerful, and very easy to use model railroad control products that can be enjoyed by beginners and experts alike. RailPro products by Ring Engineering are professional grade, powerful, and very easy to use model railroad control products that can be enjoyed by beginners and experts alike. The HC-3 is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! All you need in addition to this starter kit is at least one locomotive module. The included power supply has enough power to run 15 typical modern HO Scale locomotives. You can add additional power supplies, handheld controllers, locomotive modules, and accessory modules, to expand this starter set to control practically any size layout! Package Contents: HC-3 Handheld Controller Battery Charger (100-240VAC 50/60Hz) USB Cable PWR-56 Module PA-2 Power Adapter (110-220VAC 50/60Hz) 110 VAC Power Cable User Manual with Quick Start Guide Please see HC-3 and PWR-56 for more details on each product.

Read more less

Innovative powder adhesive. For clean, easy bonding of scatter & ballast. Instant grab, adjustable bond, reversible joints. Ballast Magic by Deluxe Materials is a new way to ballast track in all scales. The adhesive itself is a fine dry powder that is very easy to mix in with ballast. Once the adhesive and ballast mixture is laid in the track it needs to be misted with water using the Ballast Spray bottle. Using Ballast Magic is a new enjoyable way to bond ballast. Bond is reversible with warm water. Instructions: Mix thoroughly 1 part dry Ballast Magic with between 5 & 10 parts granules by volume. Apply to track or scene. Spray gently with water for instant grab & activation. Adjust if required. Allow to dry for 1-2 hours. Dries to a realistic matt effect. Fast drying 1-2 hours Good bond resistant to everyday handling Safe to use. Can be manipulated easily & mixed with most scatters Ideal for large areas, fixing coal , creating piles etc. Ballast Magic will be especially useful when ballasting around points because it can be applied in a controlled manner without the risk of adhesive flowing into the working parts of a point. Its reversible nature means that if you position something that you later think is in the wrong location you can dampen the adhesive which will then release. 125ml.

Read more less

The AM-1 is a module that you can install on your model train layout and control 4 turnouts (switch tracks). The AM-1 can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller. The AM-1 can also be used to control Accessory Projects. You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! You can use our RailPro Assistant Software to design custom screens for your HC-2 to control your accessories!!! Features: Control up to 4 turnouts per Module Control Snap or Motor Operated Turnouts Size: 4.60 x 3.00 x 1.18 inches     Important Note: When an AM-1 is used as an Accessory Module, the AM-1 hardware has 8 outputs that can be software controlled for 4 motor outputs or 8 sourcing outputs. It also has another 8 I/O that can be configured for 8 inputs or 8 sinking outputs. Currently there is only one software configuration available for the module (2 motor outputs, 4 sinking outputs, and 8 inputs). We expect to offer more software configurations in the future.  

Read more less

Multi Scale (31feet in HO, 57 feet on N) 4.3 Inches high 5 Pack A Great Value

Read more less

Kato's Insulated UniJoiners are used for electrically separating sections "blocks" on your layout. A "block" is a section of track long enough to hold a complete train (minimum requirement) on the main line or short enough to hold just a locomotive on a siding in a yard. This makes it ideal for additional operations and controls under DCC and which also allows for more advanced train detection. 20 per package. HO/N Scale

Read more less

The Rapido 102021 HO Easy-Peasy Passenger Car Lighting Set is an innovative solution for model railroad enthusiasts looking to add realistic lighting to their HO scale passenger cars. This lighting set is designed to provide a hassle-free installation and operation, making it a perfect choice for both beginners and experienced modelers. Key Features: Battery-Powered: The Easy-Peasy lighting set is powered by two LR41 batteries (included), eliminating the need for complex wiring or connections to your track power. This ensures consistent lighting without flickering, even over switches and dead spots. Magnetic Control: The set includes a magnetic wand that allows you to easily turn the lights on and off. This feature provides convenient control without the need for additional decoders or electronic components. Compact Design: The lighting set is compact enough to fit into a variety of HO scale passenger cars, cabooses, trolleys, and buses. Easy Installation: The installation process is straightforward and requires no soldering or complex wiring. Simply insert the batteries, place the lighting set in the roof of your passenger car, and you’re ready to go. Versatile Use: While designed for HO scale, the Easy-Peasy lighting set can also be used in larger scale passenger cars and other vehicles, providing flexibility for different modeling needs. Benefits: Enhanced Realism: Adding interior lighting to your passenger cars enhances the overall realism of your model railroad, making nighttime scenes more engaging and lifelike. No Power Drain: Since the lighting set is battery-powered, it does not draw power from your track, preventing any potential drain on your power pack and ensuring smooth operation of your trains. No Flickering: The battery-powered design ensures that the lights remain steady and flicker-free, providing a consistent and reliable lighting solution. User-Friendly: The magnetic wand control and easy installation make this lighting set user-friendly, allowing you to quickly and easily add lighting to your passenger cars without any technical difficulties. Ideal For: Model Railroad Enthusiasts: Whether you’re a seasoned modeler or just starting out, the Easy-Peasy lighting set is a great addition to any HO scale layout. Collectors: This lighting set adds value to your collection by enhancing the appearance and functionality of your passenger cars. Hobbyists: If you enjoy customizing and detailing your model trains, the Easy-Peasy lighting set offers a simple yet effective way to add interior lighting to your vehicles. Bring your model railroad to life with the Rapido 102021 HO Easy-Peasy Passenger Car Lighting Set. Its innovative design, ease of use, and realistic lighting effects make it an excellent choice for enhancing the visual appeal of your passenger cars. Order yours today and experience the difference that quality lighting can make!

Read more less

The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.

Read more less

Revolutionize freight service with WalthersMainline SD60 diesels. Based on mid-production EMD units built with safety cabs fitted with a three-piece windshield and designated as SD60M for modified, these heavy-haulers are still going strong for many original owners and shortlines. Ready for service on your railroad, check out the many features including: Limited edition - one time run of these roadnumbers! Prototypes in service 1989 to the present in main line and regional service Mid-production safety cab with three-piece windshield Open grating on steps With ESU Sound & DCC for DCC & DC layouts featuring: 4 Function outputs with brightness control by CV Fully DCC Compatible 14, 28, 128 Speedsteps Dual Mode DC/DCC 4 Air Horns changeable by CVs 2 Bells Changeable by CVs Full 8 Notch Prime Mover Sounds Compressor Dynamic Brake Multiple realistic lighting effects 21-pin DCC plug Same powerful drive as WalthersProto(R) locos featuring: 5-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant & directional LED headlights Updated shell with molded drill starter points for grab irons in EMD SD60M Diesel Detail Kit (#910-257) sold separately RP-25 metal wheels Proto MAX(TM) metal knuckle couplers PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders. Alternate Horns and Bells include: Horns: CV163 = Nathan K3LA (default) CV163 = Nathan P3 CV163 = Leslie RS3L CV163 = Nathan K5LA CV163 = Nathan P5 Bells: CV164 = Steel Air Bell (default) CV164 = Graham White E-Bell Click here for additional information on DCC functions: ESU CV ListESU Function MappingESU Function Output

Read more less