Ring Engineering

Ring Engineering - Squeaky's Trains & Things
Ring Engineering created the easy to use and powerful RailPro model train control system.

RailPro products by Ring Engineering are professional model railroad control products, which can be enjoyed by beginners and experts alike.

11 products


  • Sale Ring Engineering WH-9 | RailPro Wiring Harness

    Ring Engineering Ring Engineering WH-9 | RailPro Wiring Harness

    3 in stock

    Quantity: Two per packageThe WH-9 wiring harness can be used with all RailPro Locomotive modules. The WH-9 conforms to NMRA 9 pin plug standard so it can be used for any DCC locomotive where applicable. The WH-9 wiring harness can be used to add the required DCC 9 pin plug (JST) to a non-DCC locomotive. Or you can use it after removing all circuit boards from a DCC equipped or DCC ready locos (too allow a cleaner installation or make more room for a RailPro module). Please see LM instructions for actual wiring. JST connectors can come in two different ways that the pins are connected to the wires (crimp style and insulation displacement) both connect in the same manner and are interchangeable. However, we have found the crimp style pins to be far more dependable than the insulation displacement connectors that some DCC suppliers sell. WH-9 has a JST 9 pin with crimp style pins.

    3 in stock

    $6.39$5.75

  • Sale Ring Engineering WH-6 RailPro Wiring Harness

    Ring Engineering Ring Engineering WH-6 RailPro Wiring Harness

    1 review

    2 in stock

    Quantity: One per packageThe WH-6 wiring harness is used with LM-3, LM-3S, LM-2, and LM-2S modules. It is used to wire in light outputs 5 and 6 and more. Please see LM instructions for actual wiring. WH-6 has a JST 6 pin with crimp style pins. We have found the crimp style pins to be far more dependable than the insulation displacement connectors.

    2 in stock

    $6.39$5.75

  • Sale Ring Engineering AR-1 RailPro Auto Reverse Module

    Ring Engineering Ring Engineering AR-1 RailPro Auto Reverse Module

    1 review

    3 in stock

    This product is specifically designed to be used with DC and/or RailPro products. It cannot be used with DCC products. The AR-1 is used to power special configurations of track such as below. Track configuration like below would cause a short circuit if connected without the use of an AR-1. Note that if you follow Rail ā€™Aā€™ around you will notice that it connects to Rail ā€˜Bā€™! That is just like putting a piece of metal across Rail ā€™Aā€™ and Rail ā€˜Bā€™ which would cause a short circuit and would cause a power supply to shut down. The solution to power special track configurations like below is to add insulation gaps and power the sections with an AR-1. The AR-1 can also be used to isolate small sections of track, limiting the impact of short circuits if derailments occur to just one area of your layout. Features: All Solid State Design Simple Connection with Only 4 Wires No Adjustments Necessary Provides Short Circuit Isolation for a Section of Track Status Indicator Light Fast and Secure Spring Clamp Connecters Fully Enclosed Circuit Board Electronics Size: 4.60 x 3.00 x 1.18 inches Our all solid state design has many advantages over relay based designs. With the relay based designs we tested you could see the locomotive jerk when it crossed the gap at slow speeds. With our AR-1 we saw no visible change in speed at all! Further, compared to relay based designs, solid state units are far less likely to fail, switch many times faster and all without that annoying relay clicking sound. Ā  Ā  Ā 

    3 in stock

    $31.99$28.79

  • Ring Engineering LM-4S-G | RailPro 'G' Scale Locomotive Module with Sound

    Ring Engineering Ring Engineering LM-4S-G | RailPro 'G' Scale Locomotive Module with Sound | G Scale

    3 reviews

    Out of stock

    The LM-4S-G is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-4S-G is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-4S-G has ā€œDirect Radioā€ (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-4S-G module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio! Product Specifications: Sound Profile: Universal (all) Dimensions: 3.35 x 1.32 x 0.57Ā in DCC Track Voltage: 7.5V ā€“ 18V Light Outputs 6 Ā  Package Contents: LM-4S-G Locomotive Module WH-9 9 Pin Wiring Harness Instruction Sheet The LM-4S-G is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-4S-G through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-4S-G with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-4S-G! You can also load Sounds, Light Effects and much more!Your LM-4S-G is equipped with Rail Sonic HD Sound System! This is Ring Engineering's technology that allows your LM-4S-G to produce realistic locomotive sounds!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 3.35 x 1.32 x 0.57 Inches for easy fit. Important: If you are running your trains outside be sure to buy the model HC-2-SUN handheld controller instead of the standard model HC-2. The HC-2-SUN is easily readable in sunlight.Ā  The HC-2 screen was designed for indoor use and looks real good inside.Ā  Outside the standard HC-2 screen can look washed out when the sun shines on it.

    Out of stock

    $149.99

  • Ring Engineering CI-1 | RailPro Computer Interface Module

    Ring Engineering Ring Engineering CI-1 | RailPro Computer Interface Module

    1 review

    Out of stock

    Plug this USB module into your PC (Personal Computer) to add Direct Radio to your computer so you can control and setup RailPro products like the RailPro locomotive modules!You can use a CI-1 and a PC to get started with RailPro for a lower cost! You can buy a real RailPro handheld controller at a later time.PC Requirements: Windows 10, Windows 8, Windows 7, and Vista. Product Specifications: Interface: USB-A Dimensions: 1.87 x 0.78 x 0.34 in Ā  DownloadĀ the CI-1 Software Here! Ā 

    Out of stock

    $31.99

  • Ring Engineering LM-3S | RailPro HO Scale Locomotive Module with Sound

    Ring Engineering Ring Engineering LM-3S | RailPro HO Scale Locomotive Module with Sound

    1 review

    Out of stock

    The LM-3S is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3S is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-3S has ā€œDirect Radioā€ (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3S module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio!The LM-3S is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V ā€“ 18V Light Outputs 6 Ā  The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

    Out of stock

    $79.99

  • Ring Engineering HC-3 | (Indoor Use) RailPro Wireless Handheld Controller with Color Touchscreen

    Ring Engineering Ring Engineering HC-3 | (Indoor Use) RailPro Wireless Handheld Controller with Color Touchscreen

    1 review

    Out of stock

    The HC-3Ā is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features. Product Specifications: Dimensions: 6.1 x 3.4 x 1.5 in Ā  Simply touch the screen to take control of a locomotive or accessory, adjust settings and much more!Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your HC-3 to transmit and receive information!Setting up your RailPro system is easy. When you buy new RailPro Ready products, or new RailPro modules for locomotives and accessories, simply press the ā€œFind Productā€ button and the HC-3 will automatically load a picture of the product. You can take control of the product by touching the picture of the product!With a couple touches on the screen, you can link multiple locomotives together for more pulling power! With one more touch, you can unlink the locomotives. Our Direct Radio technology allows the locomotives to communicate together to ensure each locomotive pulls its share of the load.Multiple HC-3ā€™s can be used at the same time to allow additional family and friends to enjoy your model layout! Also, multiple locomotives and other accessories can be used simultaneously for complete model layout control!The HC-3 comes complete with built in rechargeable batteries.Ā The HC-3 is equipped with USB port to connect to a PC. You can go to Ring Engineeringā€™s Internet site and download new pictures, sounds, and even new programs to add more functionality to your RailPro system. You do not need a computer to use the HC-3, but this can prove to be a very useful feature.

    Out of stock

    $239.99

  • Sale Ring Engineering AM-1 RailPro Accessory Controller Module

    Ring Engineering Ring Engineering AM-1 RailPro Accessory Controller Module

    2 reviews

    Out of stock

    The AM-1 is a module that you can install on your model train layout and control 4 turnouts (switch tracks). The AM-1 can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller. The AM-1 can also be used to control Accessory Projects. You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! You can use our RailPro Assistant Software to design custom screens for your HC-2 to control your accessories!!! Features: Control up to 4 turnouts per Module Control Snap or Motor Operated Turnouts Size: 4.60 x 3.00 x 1.18 inches Ā  Ā  Important Note: When an AM-1 is used as an Accessory Module, the AM-1 hardware has 8 outputs that can be software controlled for 4 motor outputs or 8 sourcing outputs. It also has another 8 I/O that can be configured for 8 inputs or 8 sinking outputs. Currently there is only one software configuration available for the module (2 motor outputs, 4 sinking outputs, and 8 inputs). We expect to offer more software configurations in the future. Ā 

    Out of stock

    $79.99$63.99

  • Ring Engineering LM-3 | RailPro HO Scale Locomotive Module without Sound

    Ring Engineering Ring Engineering LM-3 | RailPro HO Scale Locomotive Module without Sound

    1 review

    Out of stock

    The LM-3 is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3 is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs! The LM-3 has ā€œDirect Radioā€ (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3 module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive!The LM-3 is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V ā€“ 18V Light Outputs 6 Ā  The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

    Out of stock

    $49.99

  • Sale Ring Engineering PWR-56 | RailPro Model Railroad Power Supply

    Ring Engineering Ring Engineering PWR-56 | RailPro Model Railroad Power Supply

    2 reviews

    Out of stock

    The PWR-56 is a Power Supply that can be used to supply power for your locomotives, turnouts and other accessories. The PWR-56 has 56 Watts of output power! That is enough power to drive 15 or more typical modern HO scale locomotives! Further, each PWR-56 is equipped with Direct Radio, so a RailPro controller can be used to control, setup, and monitor the PWR-56. Also, the PWR-56 can be used as a Direct Radio Repeater. Package Contents: PWR-56 Module PA-2 Power Adapter 110 VAC Power Cable User Manual Ā  Ring Engineering's AccuClean Power technology in TM the PWR-56 maintains a clean stable output voltage Clean that stays within about 3% from no load to full load! Typical model railroad power supplies can have voltage drops as high as 30% at full load. Unlike typical model railroad power supplies, when you need full power, your Ring Engineering PWR-56 will deliver! Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your PWR-56 to transmit and receive information! Because the PWR-56 has Direct Radio, you can control, setup, and monitor your PWR-56 with any RailPro controller, such as the HC-2 with color touch screen. With a RailPro controlling device, you can turn the output to the track on or off, adjust settings, monitor the output power your PWR-56 is delivering, and more! Setting up your RailPro system is easy. To control and setup your PWR-56 simply press the "Find Produce button on a RailPro controller such as the HC-2, then the RailPro Controller will automatically load a picture of your PWR-56! You can take control of your PWR-56 by touching the picture of the PWR-56 on the screen! The PWR-56 has built in Short Circuit Protection with Auto Recovery to protect your trains and equipment in case of a derailment or other rail-to-rail short! Add multiple PWR-56's to your layout to increase the total amount of power for larger layouts. Ā 

    Out of stock

    $119.99$95.99

  • Ring Engineering AM-1S | RailPro Accessory Controller Module with Sound

    Ring Engineering Ring Engineering AM-1S | RailPro Accessory Controller Module with Sound

    1 review

    Out of stock

    The AM-1S is a module that you can install on your model train layout to control Accessory Projects. You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! You can use our RailPro Assistant Software to design custom screens for your HC-2 to control your accessories!!! The AM-1S can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller. The AM-1S is not for use with turnouts. Please use AM-1 for turnout control. Control motors, lights, operate lights with light effects and play custom loaded sounds! Features: Size: 4.60 x 3.00 x 1.18 inches Ā  Important Note: Important Note: The AM-1S hardware has 8 outputs that can be software controlled for 4 motor outputs or 8 sourcing outputs. It also has another 8 I/O that can be configured for 8 inputs or 8 sinking outputs. Currently there is only one software configuration available for the module (2 motor outputs, 4 sinking outputs, and 8 inputs). We expect to offer more software configurations in the future. Ā  Ā 

    Out of stock

    $80.99

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account