GE Diesel
SoundTraxx SoundTraxx 882004 | Econami ECO-PNP Diesel (2-amp) Digital Sound Decoder
The 2-amp Econami ECO-PNP universal-style Digital Sound Decoder is suitable for a wide variety of models from HO to S scale. This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Diesel Dimensions: 74 x 17 x 5mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 12
$67.96
SoundTraxx SoundTraxx 882006 | Econami ECO-21PNEM (1-amp) Digital Diesel Sound Decoder | HO Scale
The Econami ECO-21PNEM 1-amp Digital Sound Decoder simply plugs into models equipped with an NEM-supported 21-pin socket. The ECO-21PNEM can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Diesel Dimensions: 30.5 x 15.5 x 6.55mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 12
$67.96
SoundTraxx SoundTraxx 885032 | Tsunami2 TSU-KN1 Digital Sound Decoder | N Scale
Tsunami2 meets N-Scale! The TSU-KN1 is our first plug and play Tsunami2 N-Scale decoder. Finally, you can get the Tsunami2 features you have been wanting in your N-Scale locomotives! We are excited to introduce a Plug and Play Tsunami2, N-Scale decoder and installation kit. The new TSU-KN1 is designed to fit into Kato N-Scale E, F-units, F40PH, PA and P42 locomotives. Get an easy install and the amazingly realistic sounds plus the features that all Tsunami2 decoders have to offer. The TSU-KN1 comes with a complete installation kit ensuring an easy install. Also note that the TSU-KN1 is designed with 4 LED friendly function outputs making external resistors unnecessary! Installation kit includes: TSU-KN1 Decoder Mini Cube 3 Speaker and Baffle Speaker Wire Kapton Tape 2 Sunny White LEDs Product Specifications: Dimensions: 55 x 13.8 x 3.2mm Max. Motor Stall Current: 500mA Max. Function Current: 100mA (each output) Function Outputs: 4 (LED Friendly. No resistors necessary) Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16 Tsunami2 Digital Sound Decoders integrate a full-featured sound system, Hyperlight™ lighting effects, Hyperdrive2™ advanced motor control, and a DCC decoder into a single package. Tsunami2 Digital Sound Decoders offer 20+ lighting effects in each model! Other popular Tsunami2 features include: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes. We also offer a large selection of selectable sound effects including: 8 manufacturer specific prime movers, bells (12), airhorns (40+), couplers, compressors, and more!
$127.96
Train Control Systems Train Control Systems (TCS) 1533 | WOW101-KA-Diesel | HO Scale
CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Keep-Alive®: Included on-board for smooth, stutter-free operation. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notch™: A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type: Hard-Wire, Direct-Plug (9-Pin JST) Dimensions (L x W x H): 1.35″ x 0.658″ x 0.22″ or 34.29mm x 16.72mm x 5.59mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 6 Function Rating: 100 mA 12V Outputs: 6 Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.
$124.75$112.28
SoundTraxx SoundTraxx 885006 | TSU-2200 Tsunami2 (2-amp) GE Diesel Sound Decoder | HO Scale
The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: GE Diesel Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16
$107.16
Train Control Systems Train Control Systems (TCS) 1527 | WOW121-Diesel
CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notch™: A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type: Direct-Plug (21-Pin MTC) Dimensions (L x W x H): 1.28″ x 0.689″ x 0.22″ or 32.5mm x 17.5mm x 5.6mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 8 Function Rating: 100 mA 12V Outputs: 8 Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.
$95.95
SoundTraxx SoundTraxx 885018 | TSU-4400 Tsunami2 4-amp GE Diesel Sound Decoder | Multi Scale
The TSU-4400 is designed for models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. STX810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: GE Diesel Dimensions: 69 x 30.5 x 14mm Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 6 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16
$164.00
SoundTraxx SoundTraxx 885810 | TSU-21PNEM – 8 Function – Tsunami2 (1-amp) GE Diesel Sound Decoder
The TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. They also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Sound Profile: GE Diesel Dimensions: 30.5 x 15.5 x 6.5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16
$98.36
SoundTraxx SoundTraxx 885002 | TSU-1100 Tsunami2 (1-amp) GE Diesel Sound Decoder
The TSU-1100 is one of SoundTraxx’s smallest sound decoders, yet is packed with a plethora of high-performance features! You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. SoundTraxx also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This micro 1-amp, universal-style format is ideal for small models with minimal space. It includes an optional capacitor or can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: GE Diesel Dimensions: 27 x 10.5 x 5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16
$111.96
SoundTraxx SoundTraxx 885610 | BLU-21PNEM8 Blunami GE Diesel Sound Decoder
SoundTraxx Blunami decoders will change the way you enjoy the model railroading hobby. They operate in DC, DCC, or wireless mode with the free Blunami App. The Blunami BLU-21PNEM8The BLU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Blunami has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos, and more! Need Help Choosing a Sound Profile?We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (Steam, EMD, GE, Electric, etc.). If you don't know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile. If you need further assistance explore these links: Decoder Selector: Tells you which board format and part number you need for specific models. Sound Samples: Hear SoundTraxx sounds in action!
$135.96
Digitrax Digitrax SDXH187MT | Series 7 Sound Decoder | HO Scale
The Digitrax SDXH187MT is the perfect addition to your HO scale model trains. With its Series 7 Sound Decoder, this product provides realistic and high-quality sound experience. Being an industry leader, Digitrax guarantees superior performance and compatibility for your model trains. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDXH187MT Brand Digitrax Scale HO Scale MSRP $65.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
$52.00
Digitrax Digitrax SDH187MT | Series 7 Sound Decoder | HO Scale
This Digitrax SDH187MT is a high-quality Series 7 Sound Decoder designed for HO Scale models. With advanced sound technology, this decoder brings realistic audio to your train layout. Its compact design and easy installation make it a must-have for any model train enthusiast. 2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDH187MT Brand Digitrax Scale HO Scale MSRP $55.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
$44.00