$50 to $100

The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications.  there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is  NOT INTENDED FOR USE IN A DC SYSTEM. The mother board includes:  One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".)  It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!!  The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation.  Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)

Read more less

Add texture and highlights to scenery Blends naturally with other foliage For any scale 57.7 in3 (945 cm3)

Read more less

Add up to four Just Plug LED lights of your choice to a project quickly and easily. Regulate light brightness with individual dimmer controls. Add an optional Auxiliary Switch for convenient operation. Powering Your Light System- You will need one Just Plug Power Supply (JP5770 US, JP5771 Euro, JP5772 UK, or JP5773 Aus/NZ) to power up to 50 lights on your light system, or if you want to power your system from a train power pack, purchase Connecting Cables (JP5760). ROHS Compliant

Read more less

Tsunami2 meets N-Scale! The TSU-KN1 is our first plug and play Tsunami2 N-Scale decoder. Finally, you can get the Tsunami2 features you have been wanting in your N-Scale locomotives! We are excited to introduce a Plug and Play Tsunami2, N-Scale decoder and installation kit. The new TSU-KN1 is designed to fit into Kato N-Scale E, F-units, F40PH, PA and P42 locomotives. Get an easy install and the amazingly realistic sounds plus the features that all Tsunami2 decoders have to offer.   The TSU-KN1 comes with a complete installation kit ensuring an easy install. Also note that the TSU-KN1 is designed with 4 LED friendly function outputs making external resistors unnecessary! Installation kit includes: TSU-KN1 Decoder Mini Cube 3 Speaker and Baffle  Speaker Wire  Kapton Tape 2 Sunny White LEDs  Product Specifications: Dimensions: 55 x 13.8 x 3.2mm Max. Motor Stall Current: 500mA Max. Function Current: 100mA (each output) Function Outputs: 4 (LED Friendly. No resistors necessary) Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16 Tsunami2 Digital Sound Decoders integrate a full-featured sound system, Hyperlight™ lighting effects, Hyperdrive2™ advanced motor control, and a DCC decoder into a single package. Tsunami2 Digital Sound Decoders offer 20+ lighting effects in each model! Other popular Tsunami2 features include: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes. We also offer a large selection of selectable sound effects including: 8 manufacturer specific prime movers, bells (12), airhorns (40+), couplers, compressors, and more!

Read more less

HO-scale, 4-function decoder that measures 25 x 16 x 6mm with a 9-pin ‘universal’ JST wiring harness that is mostly used in older pre-DCC or brass models. This decoder will operate in both DC and DCC. Product Specifications: Dimensions: 25 x 16 x 6mmMax. Motor Stall Current: 1AMax. Function Current: 100mA (each output)Function Outputs: 4DCC Track Voltage: 21 Volts Maximum

Read more less

The TSU-1100 is one of SoundTraxx’s smallest sound decoders, yet is packed with a plethora of high-performance features! You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. SoundTraxx also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This micro 1-amp, universal-style format is ideal for small models with minimal space. It includes an optional capacitor or can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam-2 Dimensions: 27 x 10.5 x 5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

This snap-together baffle kit is designed for use with SoundTraxx’s 28mm round speakers (P.N. STX810054 or STX810153).

Read more less

Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price.  It offers simplified advanced train operation for any size layout and is fully expandable.  You won’t have to start over when you want to do more with your railroad. Zephyr Express Set Includes: DCS52 All-In-One Throttle/Command Station/Booster to run your layout PS314 Power supply to provide power to run your DCS52 Zephyr Express Quickstart Guide Zephyr Express Manual   Zephyr Express Offers: Cost effective entry level LocoNet Compatible system Color 2.4” LCD Screen. Large Backlit Keypad. Speed control knob and direction switch with brake. Integrated USB Computer Interface Easy 2 and 4 digit addressing. Smooth speed control. Run multiple trains at once without blocking! Run up to 20 addresses at the same time on your system. Run up to 20 throttles at the same time on your system.   Jump Ports for using DC power packs as additional throttles Use one or two smooth DC power packs as throttles to control DCC equipped locomotives. Simple, cost effective way to add more throttles to your Zephyr Express set. Makes it easy to share the fun of DCC with layout visitors and young operators. Functions on locos controlled by Jump throttles remain active. Over 9000 Locomotive Addresses Use Address 00 to run one or more locos without DCC decoders Two Digit Addressing is easy to use. (Address 01-127) Four Digit Addressing-use the number painted on your engines as its address.   3.0 Amps of Power to run multiple trains. Booster outputs 13V DC for safe operation in N and HO scales. Function Control Control lights and sound with 29 functions (F0-F28) Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down. Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder). Stationary Decoders, Turnout Control & Turnout Position Reporting Access to stationary decoder control for turnouts and other devices. Control 2000+ stationary decoder addresses. Consisting Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos. Advanced consisting, allows only advanced consist capable mobile decoders. Basic consisting, program decoders to run on same address. Decoder Programming Built in read/write programmer that can read and write all CVs. Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming. Operations mode programming can be used to program decoders on the layout. Expandability with Digitrax LocoNet Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components. Use Zephyr Express as an expansion set with Digitrax equipment you already have installed. Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles. Comes Complete with DCS52 Command Station, PS314 Power Supply, and System Reference Manual. More Information Item # ZEPE / DCS52  Brand Digitrax Scale Multi Scale MSRP 245.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Zephyr Express Manual V2 /Quickstart Guide / Decoder Manual V2 / Specification Sheet / Zephyr Express Manual V1

Read more less

Static Grass 28 grams Grass length: 12mmm

Read more less

Static Grass 70 grams Grass length: 2mm

Read more less

Use the Port Sharing Device with a Light Hub or Sequencing Light Hub to add up to four Stick-On or Nano LED Lights per Light Port. Provide power quickly and easily to all of your Just Plug products. Just Plug's modular design allows for easy expansion and gives you the ability to control individual light brightness.

Read more less

Scenic Cement is a ready-to-use spray or brush-on adhesive specially formulated to glue Ballast, Turf and other landscape materials to a layout. This multi-use product is non-toxic, water-based and dries to a matte finish. It contains a wetting agent that breaks surface tension, allowing easier and faster penetration of scenery materials for a strong bond. It also permeates instantly for maximum coverage. Apply with the Scenic Sprayer™ for a smooth, flowing application that reduces spray head clogging, foaming and bubbles. 16 fl oz (473 mL)

Read more less