All Products

Use Clean Track Solution with Cleaning & Finishing Pads. It is specially formulated to remediate oil and remove dirt and grime for improved conductivity. Clean Track Solution is non-toxic, water-soluble and safe for scenery. 1.85 fl oz (54.7 mL)

Read more less

Use as an alternative to the Just Plug Power Supply to power Light Hubs, Sequencing Light Hubs and Expansion Hubs. Two 9-Volt batteries not included

Read more less

Use Harvest Gold to model dried or dormant grasses or weeds. 57.7 in3 (945 cm3) 1/16" - 1/8" (1 mm - 3 mm) in length

Read more less

The TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. They also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Baldwin & Other Diesels Dimensions: 30.5 x 15.5 x 6.5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

The TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. They also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: ALCO Diesel Dimensions: 30.5 x 15.5 x 6.5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. 57.7 in3 (945 cm3)

Read more less

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. 57.7 in3 (945 cm3)

Read more less

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. 57.7 in3 (945 cm3)

Read more less

If you grew up in Brooklyn in the 50s or even if you're just a Robert DeNiro fan... you already know who "Tony" is!This is without-a-doubt one of our most favorite kits. From a city street to a railroad track, you can locate this baby in just about any location. Approx. footprint 5" x 9Kit features precision laser-cut parts and complete instructions for easy assembly.

Read more less

Stainless Steel Coupler & Special Purpose TweezersNormally closed tweezers are that extra hand you need. The auto clamping design of these tweezers make holding small parts effortless. Ideal for assembly couplers and gearboxes.The notch end of the tweezers fits nicely over trip pin to hold coupler parts together and when used in conjunction with the Kadee® Coupler Assembly Fixture. For use with HOn3 to On3 Scale Package Includes: (1) Coupler & Special Purpose Tweezers

Read more less

#309 Under-the-Ties Delayed-Action Electric Uncoupler Kit - HO Scale Kadee® #165 Red - Normally Open momentary contact push button switches are recommend. Fits any HO code track. This package contained one HO Scale Magne-Electric electromagnetic, delayed action uncoupler kit, ready to assemble and install Under-the-Ties. It can be installed on any straight layout track, but especially on mainlines, were false uncoupling my occur. Fits any HO code track. Operates: 16 volt DC. We recommend a 16 volt DC power source (at least 3 Amps) or 18 volt AC power source (at least 3 Amps)converted to DC with bridge rectifier. WARNING: Do not use the uncoupler continually. DO NOT activate the uncoupler for longer than 2 MINUTES at one time.This will avoid possible overheating which will damage the uncoupler. (Track Not Included) Package Includes: (1) Each Coil (1) Each Steel core (4) Each Field plates (1) Each Field plate divider (1) Each Upper track mounting plate (1) Each 10-32 x 7/8" Bolt (1) Each 10-32 Nut (3) Each 2 x 3/8" flat head self-tapping screws (4) Each 0-48 x 1/4" screws (4) Each 0-48 x 3/8" screws (1) Each Bridge Rectifier (1) Each Capacitor Recommended Accessories: 3 Amp Push button momentary switch SPST - Normally Open (Kadee #165) Light bulb - 14-20 Volts, .2 Amp #20 AWG Wire- insulated, strand in two color codes Rosin Core Solder - 1/16" size Track Section, 3 1/2" long Roadbed Section, 2 1/8" long Metal Rail Joiners Ballast   Recommended Tools: Power or Crank Drill - with 1/4" bit 1/4" Drill #52 Drill (Kadee #780 Tap & Drill set) #55 Drill (Kadee #780 Tap & Drill set) Reg. Screwdriver - with 1/8" head Modeler's Knife Razor Saw Flat Chisel, 1/2" Medium Tooth File - 1/2" wide Household Pliers Soldering Iron White Glue Fine Tooth File - 1/2" wide

Read more less

The #156 "Scale" All Metal Self-Centering WHISKER® Coupler features a "Scale" Metal Coupler (a smaller head coupler which is more to scale and is patterned after the type 'E" couplers) & Metal WHISKER® Centering Spring, insulated Draft Gear Box and Lid. The #156 Coupler may be mounted with the supplied #242 draft gear box, other Kadee® HO-Scale draft gear box shown below or with the Manufacturers cast-on coupler pockets. The coupler will couple and uncouple with other Kadee® HO and HOn3 couplers. The coupler has the same shank length as the #26, 36 or 46 coupler which will allow the modeler to remove the existing #26, 36 or 46 coupler and replace with the new smaller coupler. The #156 coupler is made of the same metal as the #46 for strength and rigidity. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox. Refer to our helpful Coupler Conversion Charts to determine the appropriate coupler to use on your model. HO-Scale Package Includes: (2) Pair #156 Scale Whisker® Metal Couplers - Long Centerset Shank (2) Pair #242 Snap-Together Gearboxes (2) #625 Knuckle Springs #156 Scale Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -  Long (25/64") (center hole to back of coupler head) Coupler Offset  -  Centerset Knuckle Spring  -   #625 Centering System  -   Whisker® Head  -   Scale Head Works In Place of  -   #26, #36 (#146 in a #252 box), long centerset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   25/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less