Locomotives

20 products


  • Broadway Limited 7738 | EMD F3A - Sound and DCC - Paragon4(TM) - Southern Pacific #337 (Black Widow, black, silver, red, orange) | N Scale Broadway Limited 7738 | EMD F3A - Sound and DCC - Paragon4(TM) - Southern Pacific #337 (Black Widow, black, silver, red, orange) | N Scale

    Broadway Limited Imports Broadway Limited 7738 | EMD F3A - Sound and DCC - Paragon4(TM) - Southern Pacific #337 (Black Widow, black, silver, red, orange) | N Scale

    The EMD F3 is a 1,500 horsepower diesel locomotive built by General Motors' Electro-Motive Division between 1945 and 1949. The F3 was the third model in EMD's successful F-unit series of cab unit diesels, and it was the second most produced of the series behind the F7. The F3's were widely used in both freight and passenger service, and in total, EMD built more than 1,100 A-units and almost 700 B-units. In this production, we are modeling A and B-units from eight railroads with prototypically accurate road numbers and paint schemes. We are offering A-B sets with Powered A-units (w/ Paragon4 Sound) and unpowered B-units, and also separate single A and B-units (where appropriate) with our full Paragon4 DC/DCC/Sound system. All of our models have road-specific details and lighting. Road-specific detail options in this production, prototypically accurate for each road name: Pilot prototypical for paint scheme Operating Mars Light where prototypical Small horizontal and Large 45-degree numberboards Prototypical horn Water fill hatch location Sand fill hatch location Dynamic brake where prototypical Cooling fans and exhaust hatch accurate per each prototype Winterization hatch present where prototypically accurate Multiple MU door options on front of model Multiple skirt options above fuel tank Ladder rest grab irons present where prototypically accurate Grab iron ladder present where prototypically accurate Eyebrow grab irons present where prototypically accurate Grab irons above cab side windows where prototypically accurate Roof antenna present and correct where prototypically accurate Front and Rear lift lug present where accurate Nose door number plate present where accurate Trainphone antenna present where accurate   Industry-leading Model Features: Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation All Wheel Electrical Pick-up ABS Body with Die Cast Chassis for Maximum Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Grab Irons, Horns, and Bell Prototypical Light Operation Prototypically Accurate Sounds for the EMD F3 Diesel Locomotive MicroTrains-compatible Couplers (2) Will Operate on Code 55, Code 70 and Code 80 Rail Minimum Operating Radius: 9 inches   Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed. Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.   Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings

    £166.72

  • Broadway Limited 7987 | USRA 4-6-2 Heavy Pacific - Sound and DCC - Paragon4(TM) - Southern Railway #1386 (Sylvan Green, graphite, Tuscan) | N Scale Broadway Limited 7987 | USRA 4-6-2 Heavy Pacific - Sound and DCC - Paragon4(TM) - Southern Railway #1386 (Sylvan Green, graphite, Tuscan) | N Scale

    Broadway Limited Imports Broadway Limited 7987 | USRA 4-6-2 Heavy Pacific - Sound and DCC - Paragon4(TM) - Southern Railway #1386 (Sylvan Green, graphite, Tuscan) | N Scale

    In 2023, we are building our third production run of USRA Heavy and Light Pacifics.   There were 20 original Heavy Pacifics built in 1919 for the USRA program, and all 20 went to Erie Railroad.  From 1923, numerous copies were built, and many railroads operated similar locomotives.  There were 81 original Light Pacifics built in 1919, and these were delivered to ACL, B&O, GTW, M&O (GM&O), and L&N.  Subsequently, each of these railroads built copies, and several other railroads operated locomotives with similar dimensions and equipment.  The Light Pacifics were limited to 54,000 lbs load per axle, versus 60,000 for the Heavy Pacifics, and this allowed the Light Pacifics to run on most main lines.  Our Heavy and Light models follow the original USRA designs closely.   Railroad specific variations are not modeled on these locomotives.  Many Pacifics used the same 10,000 gallon tender as the USRA Mikados, and our models uses this 10,000 gallon tender.  In addition to some of the prototypical USRA Pacifics, we are also decorating our USRA prototype in attractive paint schemes that similar Pacifics wore for other railroads, as well as a few striking fantasy paint schemes.  Our models are available in our Paragon4 Sound/DC/DCC Series, or in our Stealth Series as No-Sound / DCC-Ready models.        Industry-Leading Features:  Paragon4 Sound & Operation System featuring ROLLING THUNDERTM  Authentic Sounds and Prototypical Operation in both DC and DCC environments Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation Prototypical Light Operation with Golden White LED Headlight Die Cast Boiler Body with Die Cast chassis for Maximum Tractive Effort Traction Tires for Additional Tractive Effort (2) Operating MicroTrains-compatible Couplers Separately Applied Handrails, Ladders, Whistle, and Brass Bell Will Operate on Code 55, 70, and 80 Rail Recommended Minimum Radius: 9.75 inches   Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings

    £237.25

  • Kato 1768528DCC | EMD SD70ACe with Nose Headlight - DCC - Union Pacific #8962 (Armour Yellow, gray, United States Flag) | N Scale

    Kato Kato 1768528DCC | EMD SD70ACe with Nose Headlight - DCC - Union Pacific #8962 (Armour Yellow, gray, United States Flag) | N Scale

    This Kato EMD SD70ACe with Nose Headlight diesel is based on the high-horsepower road diesel locomotives used in freight service from coast to coast. Features include a nose-mounted headlight, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, fine decoration, directional LED headlights and Kato magnetic knuckle couplers. This unit comes equipped with a factory-installed TCS DCC decoder. EMD SD70ACe diesels operate from coast to coast, so this N Scale model will look right at home on your modern-era layout.

    £136.22

  • Kato 1768527DCC | EMD SD70ACe with Nose Headlight - DCC - BNSF Railway #9079 (orange, black, yellow, Wedge Logo) | N Scale

    Kato Kato 1768527DCC | EMD SD70ACe with Nose Headlight - DCC - BNSF Railway #9079 (orange, black, yellow, Wedge Logo) | N Scale

    This Kato EMD SD70ACe with Nose Headlight diesel is based on the high-horsepower road diesel locomotives used in freight service from coast to coast. Features include a nose-mounted headlight, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, fine decoration, directional LED headlights and Kato magnetic knuckle couplers. This unit comes equipped with a factory-installed TCS DCC decoder. EMD SD70ACe diesels operate from coast to coast, so this N Scale model will look right at home on your modern-era layout.

    £136.22

  • Kato 1768946 | GE ES44AC GEVO - Standard DC - Florida East Coast #801 (red, yellow, black) | N Scale

    Kato Kato 1768946 | GE ES44AC GEVO - Standard DC - Florida East Coast #801 (red, yellow, black) | N Scale

    This Kato GE ES44AC is based on units in service from coast to coast since the 2003. This standard DC locomotive features a five-pole motor with dual flywheels, directional LED headlights, highly detailed body, wheel profiles for operation on Code 55 and larger rail, great decoration and Kato knuckle couplers. It can be converted to DCC operation by changing out the lighting board with a DCC decoder of your choice (sold separately). The GE ES44AC will be at home on the head end of your railroad's 2000s and later freight consists.

    £62.51

  • Kato 1768529 | EMD SD70ACe with Nose Headlight - Standard DC - Union Pacific #8983 (Armour Yellow, gray, United States Flag) | N Scale

    Kato Kato 1768529 | EMD SD70ACe with Nose Headlight - Standard DC - Union Pacific #8983 (Armour Yellow, gray, United States Flag) | N Scale

    This Kato EMD SD70ACe with Nose Headlight diesel is based on the high-horsepower road diesel locomotives used in freight service from coast to coast. Features include a nose-mounted headlight, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, a lighting control board that can be swapped for a DCC decoder when you're ready (available separately), fine decoration, directional LED headlights and Kato magnetic knuckle couplers. EMD SD70ACe diesels operate from coast to coast, so this N Scale model will look right at home on your modern-era layout.

    £75.33

  • Kato 1768526 | EMD SD70ACe with Nose Headlight - Standard DC - BNSF Railway #8780 (orange, black, yellow, Wedge Logo) | N Scale

    Kato Kato 1768526 | EMD SD70ACe with Nose Headlight - Standard DC - BNSF Railway #8780 (orange, black, yellow, Wedge Logo) | N Scale

    This Kato EMD SD70ACe with Nose Headlight diesel is based on the high-horsepower road diesel locomotives used in freight service from coast to coast. Features include a nose-mounted headlight, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, a lighting control board that can be swapped for a DCC decoder when you're ready (available separately), fine decoration, directional LED headlights and Kato magnetic knuckle couplers. EMD SD70ACe diesels operate from coast to coast, so this N Scale model will look right at home on your modern-era layout.

    £75.33

  • Sale Walthers Trainline 910-20432 | EMD GP9 Phase II with Chopped Nose - ESU(R) Sound and DCC - Canadian National #4012 (red, black, white stripes) | HO Scale Walthers Trainline 910-20432 | EMD GP9 Phase II with Chopped Nose - ESU(R) Sound and DCC - Canadian National #4012 (red, black, white stripes) | HO Scale

    WalthersMainline Walthers Trainline 910-20432 | EMD GP9 Phase II with Chopped Nose - ESU(R) Sound and DCC - Canadian National #4012 (red, black, white stripes) | HO Scale

    PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell

    £146.47£139.14

  • Walthers Trainline 910-20433 | EMD GP9 Phase II with Chopped Nose - ESU(R) Sound and DCC - Canadian National #4013 (red, black, white stripes) | HO Scale Walthers Trainline 910-20433 | EMD GP9 Phase II with Chopped Nose - ESU(R) Sound and DCC - Canadian National #4013 (red, black, white stripes) | HO Scale

    WalthersMainline Walthers Trainline 910-20433 | EMD GP9 Phase II with Chopped Nose - ESU(R) Sound and DCC - Canadian National #4013 (red, black, white stripes) | HO Scale

    PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell

    £146.47

  • Walthers Trainline 910-10432 | EMD GP9 Phase II with Chopped Nose - Standard DC - Canadian National #4002 (red, black, white stripes) | HO Scale Walthers Trainline 910-10432 | EMD GP9 Phase II with Chopped Nose - Standard DC - Canadian National #4002 (red, black, white stripes) | HO Scale

    WalthersMainline Walthers Trainline 910-10432 | EMD GP9 Phase II with Chopped Nose - Standard DC - Canadian National #4002 (red, black, white stripes) | HO Scale

    WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell

    £109.00

  • Walthers Trainline 910-10433 | EMD GP9 Phase II with Chopped Nose - Standard DC - Canadian National #4010 (red, black, white stripes) | HO Scale Walthers Trainline 910-10433 | EMD GP9 Phase II with Chopped Nose - Standard DC - Canadian National #4010 (red, black, white stripes) | HO Scale

    WalthersMainline Walthers Trainline 910-10433 | EMD GP9 Phase II with Chopped Nose - Standard DC - Canadian National #4010 (red, black, white stripes) | HO Scale

    WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell

    £109.00

  • Walthers Trainline 931-2505 | EMD GP15-1 - Standard DC - Union Pacific(R) (yellow, gray, red) | HO Scale Walthers Trainline 931-2505 | EMD GP15-1 - Standard DC - Union Pacific(R) (yellow, gray, red) | HO Scale

    WalthersTrainline Walthers Trainline 931-2505 | EMD GP15-1 - Standard DC - Union Pacific(R) (yellow, gray, red) | HO Scale

    Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

    £56.07

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account