N Scale
Kato Kato 1768952 | GE ES44AC GEVO - Standard DC - BNSF Railway #5801 (orange, black, Wedge Logo) | N Scale
This Kato GE ES44AC is based on units in service from coast to coast since the 2003. This standard DC locomotive features a five-pole motor with dual flywheels, directional LED headlights, highly detailed body, wheel profiles for operation on Code 55 and larger rail, great decoration and Kato knuckle couplers. It can be converted to DCC operation by changing out the lighting board with a DCC decoder of your choice (sold separately). The GE ES44AC will be at home on the head end of your railroad's 2000s and later freight consists.
$77.99
Kato Kato 1768955 | GE ES44AC GEVO - Standard DC - Union Pacific #5553 (Armour Yellow, gray, US Flag, Building America Logo) | N Scale
This Kato GE ES44AC is based on units in service from coast to coast since the 2003. This standard DC locomotive features a five-pole motor with dual flywheels, directional LED headlights, highly detailed body, wheel profiles for operation on Code 55 and larger rail, great decoration and Kato knuckle couplers. It can be converted to DCC operation by changing out the lighting board with a DCC decoder of your choice (sold separately). The GE ES44AC will be at home on the head end of your railroad's 2000s and later freight consists.
$77.99
Walthers Cornerstone Walthers Cornerstone 933-2320 | Cornerstone Turntable Control Box - For 933-2851, 2859, 2860 and 2618 Turntables Only (Each Sold Separately) | Multi Scale
The Walthers Cornerstone Turntable Control Box allows you to expand operations of your HO or N Scale Cornerstone Motorized Turntable up to four remote locations. This add-on control box is designed for use with the turntables as noted above. It can be used on layouts running on DC or DCC train control and provides simple operation and programming with programmable indexing for up to 99 different tracks, one-touch 180-degree bridge rotation in either direction and a simplified LED display with adjustable brightness. Allows adding additional Motorized Turntable control points Use on DC or DCC layouts Two-digit LED display Measures: 3" 7.6cm Square Inside 3-5/8" 9.2cm Square Exterior Allow 1" 2.5cm clearance; additional space may be required for cables. For advanced control using DCC, Arduino and similar advanced controllers please refer to the Cornerstone Turntable Advanced Control Module.Please Note: This unit is designed for use only with the following Motorized Turntables, each sold separately: HO Scale 90' 933-2860 HO Scale 110' 933-2851 HO Scale 130' 933-2859 N Scale 130' 933-2618
$38.95
WalthersTrainline Walthers Trainline 931-2501 | EMD GP15-1 - Standard DC - Canadian Pacific (red, white) | HO Scale
Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels
$69.95$62.95
Bluford Shops Bluford Shops 87330 | 86' Quad Door Boxcar - Pennsylvania Railroad #110160 | N Scale
$0.00 Pre-Order | Estimated delivery Summer 2023 Bluford Shops is introducing a new run of our N scale Pullman Standard 86’ Quad Door Auto Parts Boxcars. This new set of releases will feature a new draft gear design that accommodates 1015 and compatible couplers (included,) our latest 70 ton roller bearing trucks and metal wheels. The minimum radius is 11”. They also include separate wire grab irons and etched metal platforms on the ends. The draft gear is mounted to the body but has a spring centered swing action that both resists string-lining the train pulling through curves and resists the trucks climbing the rail during shoving moves. These super-size boxcars were originally built to carry high-value low-density automobile parts such as body panels and window glass to final assembly plants. This Quad Door variation was developed at the request of General Motors but could later be found serving other manufacturers as well. Cars were purchased in pools that included several railroads (based on mileage) and several auto plants. For instance, a pool could include plants in California, Michigan, Georgia and New York and include boxcars from more than half a dozen railroads. Cars could be assigned to any destination in the pool whether or not it was on the home road. In later years, these cars could be found carrying other low-density loads such as turbine fans, paper pulp, breakfast cereal and even peat moss used in landscaping. More Information Item # 87330 Scale N Road Name Pennsylvania Railroad Road Number 110160 Order Type $0.00 Pre-Order Expected Shipping Winter 2023
$31.99
Woodland Scenics Woodland Scenics 1411 | 4% Incline/Decline Set | Multi Scale
Flexible inclines are designed to simplify adding changes in elevation along straight or curved tracks. The pre-cut foam sections are molded in 2, 3 or 4 percent grades, which takes the guesswork and complex math out of building different levels of track. 4% sections elevate trackage 4" in 8'. All sections measure 2-1/2" wide x 24" long.
$13.49$12.79
Woodland Scenics Woodland Scenics 1410 | 2% Incline/Decline Set | Multi Scale
Flexible inclines are designed to simplify adding changes in elevation along straight or curved tracks. The pre-cut foam sections are molded in 2, 3 or 4 percent grades, which takes the guesswork and complex math out of building different levels of track. The 2% Sections (#785-1410) raise the track 4" in 16'. The 3% Sections (#785-1415) elevate tracks 4-1/2" in 12'. Four Percent sections elevate trackage 4" in 8'. All sections measure 2-1/2" wide x 24" long.
$16.99
Circuitron Circuitron 800-6200TB | Smail Slow Motion Switch Machine w Terminal Block | Multi Scale
Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).
$39.97
Woodland Scenics Woodland Scenics 5744 | Just Plug Lighting System - Yellow LED Nano Lights | Multi Scale
2 lights with 24" (60.9 cm) cable/pkg - 20mA each
$7.49
Woodland Scenics Woodland Scenics 5738 | Just Plug Lighting System | Blue Stick-On Lights 25mA (2)
Blue Stick-On Light 25mA Includes 24" cables 2 lights per package Ready to plug into Light Hub (sold separately) INSTRUCTIONS: Align locking tabs on Light Plug with front of Light Hub (JP5700, JP5701) and insert into LIGHT Port until locking tabs click into place. Remove release paper from back of Light and stick on where desired. Blue plastic band (1") on cable identifies Blue light.
$7.99
