Supplies & Parts

3D Printed HO Scale Rerailer’s uniquely created by Squeaky’s Trains & Things. Condition: New Quantity: 2 Pack, long and short rerailers. Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Scale: HO Scale (Long) Length: 8.85″ / 22.5cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Scale: HO Scale (Short) Length: 5.83″ / 14.8cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Notes:  Logo sign, rails and Freight Car not included.

Read more less

Free USA Shipping Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features 12 Pack DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

Circuitron "Smail" Slow Motion Actuator with Integrated Logic (DCC Decoder Equipped) 12 Pack, 800-6212Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).12 SMAILs per pack. Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

Speedi Driver Cleaner for HOn3 to O Scale Quickly and simply spins dirt and gum from locomotive drive wheels. Restores electrical pickup, eliminates erratic locomotive performance due to dirty, scummed wheel treads! Just clip brush leads any place on running rails, or to 12 volt DC power source. Locomotive motor thus powered, spins drivers against brush to whisk away grime and corrosion from driver treads in seconds. Works with DCC. A real hobby helper! NO SPECIAL WIRING REQUIRED! Package Includes: (1) Speedi Driver Cleaner for - HOn3 to O Scale

Read more less

Red Insulating Fiber Washers .015in Thick Red insulated fiber washer. 1/4"OD x 1/8" ID x .015" thick. Made form vulcanized fiber with a UL 94 HB rating. Useful as spacers for adjusting car height and in many other applications. 4 dozen per package.

Read more less

Greas-em Dry Graphite Lubricant This fine, dry graphite lubricant is specially selected for use with Kadee® Couplers & Trucks. 5.5 gram tube Also an excellent general purpose lubricant for use all around the layout to reduce friction in moving parts and bearing surfaces. Add a puff inside your couplers, move them back-and-forth a few times to burnish and enjoy smooth action of your couplers. Ideal for reducing friction of moving parts and bearing surfaces. Package Includes: (1) Greas-em Dry Graphite Lubricant 5.5 gram tube

Read more less

Gray Insulating Fiber Washers .010in Thick Gray insulated fiber washer. 1/4"OD x 1/8" ID x .010" thick. Made form vulcanized fiber with a UL 94 HB rating. Useful as spacers for adjusting car height and in many other applications. 4 dozen per package.

Read more less

Stainless Steel Coupler & Special Purpose TweezersNormally closed tweezers are that extra hand you need. The auto clamping design of these tweezers make holding small parts effortless. Ideal for assembly couplers and gearboxes.The notch end of the tweezers fits nicely over trip pin to hold coupler parts together and when used in conjunction with the Kadee® Coupler Assembly Fixture. For use with HOn3 to On3 Scale Package Includes: (1) Coupler & Special Purpose Tweezers

Read more less

#205 Metal Muti-Purpose Coupler Height Gauge - HO ScaleIncludes the No.5® Coupler & #58 Scale Coupler - Kit. EASY TO ASSEMBLE & USE A must have tool for gauging correct coupler height, trip pin, and permanent uncoupler heights for achieving trouble free coupler performance. Also has a built in HO track gauge. "Takes the guess work out" Four tools in one.1. Provides instant visual reference of proper coupler height.2. Accurately measures proper trip pin height above rail.3. Built-in track gauge. (N.M.R.A. Standard)4. Movable dowel tests Kadee® Magne-Matic® Uncoupler height and registers the needed adjustments. NOTE: The #205 gauge is not insulated and "only" should be used on a nonpowered track or track with the electrical power completely switched off.Track not included Package Includes: (1) each No.®5 Coupler (1) each #58 Coupler (1) each #205 Height Gauge Base (uncolored) (10) each .015 Red Fiber Washers (2) each #622 Knuckle Springs (2) each #625 Knuckle Springs (1) each 2-56 x 3/8" Screw

Read more less

#701 HO Scale Coupler Assembly Fixture for #4, 5, 9 & 58 Couplers A handy tool for assisting in the assembly of your Kadee® #4, NO.5® , 9 , & 58 HO Couplers. Clamps coupler in the draft gear box, allowing easy insertion of centering spring and attachment of lid.

Read more less

Make your WalthersMainline locos even more realistic in minutes with this Diesel Detail Kit! The complete set of HO grab irons fits the standard locations on the model, and they're made of durable, factory-formed stainless steel wire. The set details one model and includes illustrated instructions. Parts in this 25-piece set include: 4 front drop grab irons 8 small straight nose grab irons 4 long straight nose grab iron 2 rear pilot grab irons 2 long end handrail grab irons 2 drop grab irons for long hood behind cab 3 drop grab irons for rear inverter box 2 plastic injected cut levers More Information Item # 910-250 Brand WalthersMainline Scale HO Type Diesel Detail Kit Use With Walthers Mainline 910-10200, 910-10201 Model shown not included.

Read more less

Make your passenger cars even more realistic with this set of add-on details made especially for WalthersMainline HO models. There's a full set of durable formed stainless steel grab irons, along with body-mounted coupler boxes with a swinging drawbar, bushing and cover for improved operation on 24" and larger curves. Parts for one car are included along with complete illustrated instructions.

Read more less