DCC Accessories

37 products


  • SoundTraxx 810140 | CurrentKeeperā„¢

    SoundTraxx SoundTraxx 810140 | CurrentKeeperā„¢

    4 reviews

    The SoundTraxx CurrentKeeperā„¢ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet.Ā It measures 40 x 6 x 11mm.

  • SoundTraxx 810160 | CurrentKeeperIIā„¢ SoundTraxx 810160 | CurrentKeeperIIā„¢

    SoundTraxx SoundTraxx 810160 | CurrentKeeperIIā„¢

    3 reviews

    Introducing the More Compact CurrentKeeperII! Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make your installs easier! Keep more of your trains running even over dirty track and switches!Ā  The NEW SoundTraxx CurrentKeeperIIā„¢ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet.Ā It measures 20.1 x 13.2 x 11mm. ā— Maintains power to the decoder for up to 6 seconds during electrical interruptionsā— Compatible with NMRA DCC Standards & Recommended Practices

  • SoundTraxx 810135 | 9-pin JST to NMRA 8-pin Wiring Harness SoundTraxx 810135 | 9-pin JST to NMRA 8-pin Wiring Harness

    SoundTraxx SoundTraxx 810135 | 9-pin JST to NMRA 8-pin Wiring Harness

    The SoundTraxx 9-pin JST to NMRA 8-pin wiring harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.

  • ESU 53900 | DCC Decoder Tester - Cube Speaker & LEDs

    ESU LLC ESU 53900 | DCC Decoder Tester - Cube Speaker & LEDs | Multi Scale

    1 review

    Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this? The Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance. Features In order to make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models: Besides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in ā€“ it will fit! And thatā€™s all there is to it! Decoders without any interface can be contacted with individual terminals.Ā  A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus it is quite easy to check on the low speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6. For testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm ā€“ thus the Decoder Tester is perfectly suitable for any ESU decoder generation! Two SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board. The electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points. The dimensions of the ESU Decoder Tester are 99 x 74 x 34mm. WARNING:Ā This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go toĀ www.P65Warnings.ca.gov

  • Ring Engineering HC-3-SUN | (Outdoor Use) RailPro Wireless Handheld Controller with BRIGHT Color Touchscreen

    Ring Engineering Ring Engineering HC-3-SUN | (Outdoor Use) RailPro Wireless Handheld Controller with BRIGHT Color Touchscreen

    1 review

    The HC-3-SUN with an Extra Bright Screen for use in outdoor environments and sunlight, is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features. Product Specifications: Dimensions: 6.1 x 3.4 x 1.5 in Ā  Simply touch the screen to take control of a locomotive or accessory, adjust settings and much more!Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your HC-3 to transmit and receive information!Setting up your RailPro system is easy. When you buy new RailPro Ready products, or new RailPro modules for locomotives and accessories, simply press the ā€œFind Productā€ button and the HC-3 will automatically load a picture of the product. You can take control of the product by touching the picture of the product!With a couple touches on the screen, you can link multiple locomotives together for more pulling power! With one more touch, you can unlink the locomotives. Our Direct Radio technology allows the locomotives to communicate together to ensure each locomotive pulls its share of the load.Multiple HC-3ā€™s can be used at the same time to allow additional family and friends to enjoy your model layout! Also, multiple locomotives and other accessories can be used simultaneously for complete model layout control!The HC-3 comes complete with built in rechargeable batteries.Ā The HC-3 is equipped with USB port to connect to a PC. You can go to Ring Engineeringā€™s Internet site and download new pictures, sounds, and even new programs to add more functionality to your RailPro system. You do not need a computer to use the HC-3, but this can prove to be a very useful feature.

    $263.99

  • SoundTraxx 810110 | 28mm Speaker Baffle Kit

    SoundTraxx SoundTraxx 810110 | 28mm Speaker Baffle Kit

    This snap-together baffle kit is designed for use with SoundTraxxā€™s 28mm round speakers (P.N. STX810054 or STX810153).

  • SoundTraxx 810158 | CurrentKeeper 2-Pin Wiring Harness

    SoundTraxx SoundTraxx 810158 | CurrentKeeper 2-Pin Wiring Harness

    1 review

    Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin ā€œQuick Plugā€ to improve performance over dirty track and switches.

  • SoundTraxx 829002 | PTB-100 Programming Track Booster SoundTraxx 829002 | PTB-100 Programming Track Booster

    SoundTraxx SoundTraxx 829002 | PTB-100 Programming Track Booster

    The PTB-100 Programming Track Booster is a handy tool for anyone who uses DCC! This device facilitates programming as well as gives some comforting feedback during the programming process. You will instantly know if your decoder has received the programming instruction (or not!) by way of indicator lights on the circuit board. So why might you want (or need) a PTB-100? Certain command stations allow you to read a CV during Service Mode programming, which is useful to verify its current setting. Sometimes trouble reading or verifying CVs may be due to the design of the command station and the decoder itself. All decoders communicate back to the command station using whatā€™s called an acknowledgement pulse, which is defined in NMRA RP-9.2.3 as ā€œan increased load on the programming track of at least 60mA for at least 5ms.ā€ Like most decoders, SoundTraxx Digital Sound Decoders generate the acknowledgment pulse by momentarily applying power to the motor. If the decoder is otherwise working properly (i.e., responds properly on the mainline to speed and direction commands), but the command station is having trouble reading CV data from the decoder, it may be due to incompatibilities between the electrical requirements of the sound decoder (which are different from conventional decoders due to the added audio circuitry) and the electrical characteristics of the programming track. In this case, you will need to use a programming track booster, such as the PTB-100. The PTB-100 amplifies the programming track signals to levels that work best with SoundTraxx Sound Decoders. It is easy to install and inexpensive. An advantage to using the PTB-100 is that it also provides short circuit detection and some helpful diagnostics. The PTB-100 is neither needed nor recommended for use with the Zimo MX1 or the Lenz LVZ100.

  • SoundTraxx 810159 | JST-21PNEM Adapter

    SoundTraxx SoundTraxx 810159 | JST-21PNEM Adapter

    Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC ā€œquick plugā€ equipped model. This adapter can also be used with SoundTraxx 9-Pin JST power harness (STX810069) to create a universal-style decoder. Dimensions:Ā 22.5 x 16 x 7.5mm Support for up toĀ 8 functions Solder PadsĀ for CurrentKeeper, speaker connections and extra lights

  • Ring Engineering HC-3 | (Indoor Use) RailPro Wireless Handheld Controller with Color Touchscreen

    Ring Engineering Ring Engineering HC-3 | (Indoor Use) RailPro Wireless Handheld Controller with Color Touchscreen

    1 review

    The HC-3Ā is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features. Product Specifications: Dimensions: 6.1 x 3.4 x 1.5 in Ā  Simply touch the screen to take control of a locomotive or accessory, adjust settings and much more!Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your HC-3 to transmit and receive information!Setting up your RailPro system is easy. When you buy new RailPro Ready products, or new RailPro modules for locomotives and accessories, simply press the ā€œFind Productā€ button and the HC-3 will automatically load a picture of the product. You can take control of the product by touching the picture of the product!With a couple touches on the screen, you can link multiple locomotives together for more pulling power! With one more touch, you can unlink the locomotives. Our Direct Radio technology allows the locomotives to communicate together to ensure each locomotive pulls its share of the load.Multiple HC-3ā€™s can be used at the same time to allow additional family and friends to enjoy your model layout! Also, multiple locomotives and other accessories can be used simultaneously for complete model layout control!The HC-3 comes complete with built in rechargeable batteries.Ā The HC-3 is equipped with USB port to connect to a PC. You can go to Ring Engineeringā€™s Internet site and download new pictures, sounds, and even new programs to add more functionality to your RailPro system. You do not need a computer to use the HC-3, but this can prove to be a very useful feature.

    $239.99

  • Sale Ring Engineering AR-1 RailPro Auto Reverse Module

    Ring Engineering Ring Engineering AR-1 RailPro Auto Reverse Module

    1 review

    This product is specifically designed to be used with DC and/or RailPro products. It cannot be used with DCC products. The AR-1 is used to power special configurations of track such as below. Track configuration like below would cause a short circuit if connected without the use of an AR-1. Note that if you follow Rail ā€™Aā€™ around you will notice that it connects to Rail ā€˜Bā€™! That is just like putting a piece of metal across Rail ā€™Aā€™ and Rail ā€˜Bā€™ which would cause a short circuit and would cause a power supply to shut down. The solution to power special track configurations like below is to add insulation gaps and power the sections with an AR-1. The AR-1 can also be used to isolate small sections of track, limiting the impact of short circuits if derailments occur to just one area of your layout. Features: All Solid State Design Simple Connection with Only 4 Wires No Adjustments Necessary Provides Short Circuit Isolation for a Section of Track Status Indicator Light Fast and Secure Spring Clamp Connecters Fully Enclosed Circuit Board Electronics Size: 4.60 x 3.00 x 1.18 inches Our all solid state design has many advantages over relay based designs. With the relay based designs we tested you could see the locomotive jerk when it crossed the gap at slow speeds. With our AR-1 we saw no visible change in speed at all! Further, compared to relay based designs, solid state units are far less likely to fail, switch many times faster and all without that annoying relay clicking sound. Ā  Ā  Ā 

    $39.99$31.95

  • NixTrainz | Decoder Buddy Light Test Board NixTrainz | Decoder Buddy Light Test Board

    NixTrainz NixTrainz | Decoder Buddy Light Test Board

    This Light Test Board module replaces the existing connector board and plugs directly into theĀ NixTrainz Decoder Buddy Adapter Board to make programming, testing, and diagnostics work quick and easy.Ā  The test module has LEDs on-board so you can program, test and troubleshoot your installation with ease. Ā  Compatible with: Decoder Buddy Original (1k Ohm, 8 Outputs) Decoder Buddy Version 5 (12 Outputs) Decoder Buddy Mini (1k Ohm Resistors Onboard) Decoder Buddy Mini (Separate Resistors Included) Ā 

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account