The EMD F3 is a 1,500 horsepower diesel locomotive built by General Motors' Electro-Motive Division between 1945 and 1949.   The F3 was the third model in EMD's successful F-unit series of cab unit diesels, and it was the second most produced of the series behind the F7.  The F3's were widely used in both freight and passenger service, and in total, EMD built more than 1,100 A-units and almost 700 B-units.  In this production, we are modeling A and B-units from nine railroads with prototypically accurate road numbers and paint schemes.  We are offering A-B sets with Powered A-units (w/ Paragon4 Sound) and unpowered B-units, and also separate single A and B-units with our full Paragon4 DC/DCC/Sound system.  All of our models have road-specific details and lighting.  Road-specific detail options in this production, prototypically accurate for each road name: Pilot prototypical for paint scheme Operating Mars Light where prototypical Small horizontal and Large 45-degree numberboards Prototypical horn Water fill hatch location Sand fill hatch location Dynamic brake where prototypical Cooling fans and exhaust hatch accurate per each prototype  Winterization hatch present where prototypically accurate Multiple MU door options on front of model Multiple skirt options above fuel tank Ladder rest grab irons present where prototypically accurate Grab iron ladder present where prototypically accurate Eyebrow grab irons present where prototypically accurate Grab irons above cab side windows where prototypically accurate Roof antenna present and correct where prototypically accurate Front and Rear lift lug present where accurate Nose door number plate present where accurate Trainphone antenna present where accurate   Industry-leading Model Features:    Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation All Wheel Electrical Pick-up ABS Body with Die Cast Chassis for Maximum Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Grab Irons, Horns, and Bell Prototypical Light Operation Prototypically Accurate Sounds for the EMD F3 Diesel Locomotive Metal Kadee-compatible Couplers (2) Will Operate on Code 55, Code 70 and Code 80 Rail Minimum Operating Radius:  9 inches     Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings

Read more less

Available for Special Order onlyShips as soon as product arrives! Estimated Time: 1 - 2 Weeks Often called the largest steam loco ever made, and certainly a contender for the Worlds Most Famous Locomotive, the Big Boy was forged under some of the most strenuous demands ever placed on a locomotive. The UP Railroad needed a locomotive that could be used to pull a 3,600-ton train over Sherman Hill and the 1.14% grade from Ogden to Wasatch, Utah without the need for helpers. When the design specifications were complete, it was decided on the use of a simple articulated, high speed, 132 ft. long locomotive sporting sixteen 68 diameter drive wheels. What they created was the longest and among the heaviest, most powerful steam locomotive legends in the world. And had not the worker at ALCO chalked Big Boy on the side of the smoke box of one of the 4-8-8-4s under construction, a name that immediately caught on, it is rumored that the name of the type would have been Wasatch, for the mountains they were built to conquer. Quote from Worlds Greatest Steam Locomotives by Eugene L. Huddleston: There were 25 locomotives fabricated in two different groups. Class 1 were locomotives #4000-4019 and Class 2 was numbered 4020-4024. The first Big Boy #4000 was delivered to Omaha, NE on September 5, 1941.  The Union Pacific Railroad's commitment to the Big Boy required them to replace the lighter rail and straighten out many miles of track for clearance as well as to resize elements of their service areas (such as turntable lengths, etc.) for the entire line these locos would run on. The Big Boys demonstrated fantastic strength and speed as they faced these challenges throughout their storied careers. With the total mileage on the Big Boy fleet being approximately 1,000,000 miles for each locomotive, one must say that they earned their reputation. Several examples remain in museums around the country but silently they sit as a visual echo to the thunder that once made them revered throughout the landscape that the Big Boys dominated. In our first production of this model in N scale, BLI is modeling the Union Pacific Big Boy with these notable features: Accurately modeled front end with appropriate aftercooler system for each class Accurately modeled 25-C-100 and 25-C-400 tender, appropriate for each class Accurately modeled oil tender for #4014 which operates in excursion service today Two models painted in attractive two-tone gray paint schemes that the Big Boys never received in real life  Industry-leading Model Features:    Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation Operating Smoke Unit with On/Off Switch Six Drivers and All Tender Wheels Pick-up Electricity from Track Die Cast Locomotive Body with Die Cast Chassis for Heavier Weight and Maximum Tractive Effort Rubber Tires on Two Drivers for Additional Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Handrails, Grab Irons, Piping, Tender Ladders, Whistle, and Bell Prototypical Headlight and Rear Light Operation Separately Controllable Cab Light and Lighted Numberboards Prototypically Accurate Sounds for the Union Pacific Big Boy Operating Microtrains-compatible Couplers Will Operate on Code 55, Code 70, and Code 80 Rail Minimum Operating Radius:  9.75 inches     Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less

Available for Special Order onlyShips as soon as product arrives! Estimated Time: 1 - 2 Weeks Often called the largest steam loco ever made, and certainly a contender for the Worlds Most Famous Locomotive, the Big Boy was forged under some of the most strenuous demands ever placed on a locomotive. The UP Railroad needed a locomotive that could be used to pull a 3,600-ton train over Sherman Hill and the 1.14% grade from Ogden to Wasatch, Utah without the need for helpers. When the design specifications were complete, it was decided on the use of a simple articulated, high speed, 132 ft. long locomotive sporting sixteen 68 diameter drive wheels. What they created was the longest and among the heaviest, most powerful steam locomotive legends in the world. And had not the worker at ALCO chalked Big Boy on the side of the smoke box of one of the 4-8-8-4s under construction, a name that immediately caught on, it is rumored that the name of the type would have been Wasatch, for the mountains they were built to conquer. Quote from Worlds Greatest Steam Locomotives by Eugene L. Huddleston: There were 25 locomotives fabricated in two different groups. Class 1 were locomotives #4000-4019 and Class 2 was numbered 4020-4024. The first Big Boy #4000 was delivered to Omaha, NE on September 5, 1941.  The Union Pacific Railroad's commitment to the Big Boy required them to replace the lighter rail and straighten out many miles of track for clearance as well as to resize elements of their service areas (such as turntable lengths, etc.) for the entire line these locos would run on. The Big Boys demonstrated fantastic strength and speed as they faced these challenges throughout their storied careers. With the total mileage on the Big Boy fleet being approximately 1,000,000 miles for each locomotive, one must say that they earned their reputation. Several examples remain in museums around the country but silently they sit as a visual echo to the thunder that once made them revered throughout the landscape that the Big Boys dominated. In our first production of this model in N scale, BLI is modeling the Union Pacific Big Boy with these notable features: Accurately modeled front end with appropriate aftercooler system for each class Accurately modeled 25-C-100 and 25-C-400 tender, appropriate for each class Accurately modeled oil tender for #4014 which operates in excursion service today Two models painted in attractive two-tone gray paint schemes that the Big Boys never received in real life  Industry-leading Model Features:    Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation Operating Smoke Unit with On/Off Switch Six Drivers and All Tender Wheels Pick-up Electricity from Track Die Cast Locomotive Body with Die Cast Chassis for Heavier Weight and Maximum Tractive Effort Rubber Tires on Two Drivers for Additional Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Handrails, Grab Irons, Piping, Tender Ladders, Whistle, and Bell Prototypical Headlight and Rear Light Operation Separately Controllable Cab Light and Lighted Numberboards Prototypically Accurate Sounds for the Union Pacific Big Boy Operating Microtrains-compatible Couplers Will Operate on Code 55, Code 70, and Code 80 Rail Minimum Operating Radius:  9.75 inches     Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less

#510 Andrews (1898) Trucks with Ready-to-MountWhisker®Couplers, 33" Ribbed Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks TheWhisker®couplers will need to be assembled on to the trucks coupler bottom plate. Mounts with a #2 or 2-56 screw.Mounting Screws not Included. The Andrews truck is also a turn of the century design that was long lived. It represents one of the first steps in the development of the modern freight truck with its cast frame. The journal boxes are bolted to the main frame. This truck was used through the end of the 1950's although by that time was only used in lighter applications such as refrigerator cars. Andrews trucks are probably still used were logging railroads remain in operation. HO-Scale   Metal Fully Sprung Trucks Features: Ready-To-Mount #148 Metal Whisker® Couplers Code 110 (.110) #523 33" Ribbed Back Wheels Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs Package Includes: (2) Each #510 Andrews (1898) Trucks with Coupler Platform (assembled) (2) Each #148 Metal Whisker® Couplers (2) Each Coupler Gearbox (2) Each 0-48 Screw (2) Each Insulated Bushing (2) Each #209 Gray Insulating Fiber Washers .010" (2) #622 Knuckle Springs The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

#502 Bettendorf 50-ton Trucks with Ready-to-MountWhisker®Couplers, 33" Smooth Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks TheWhisker®couplers will need to be assembled on to the trucks coupler bottom plate. Mounts with a #2 or 2-56 screw.Mounting Screws not Included. The Bettendorf Double Truss Truck was introduced in the 1930's by U.S. railroads and was allowed to be used in interchange service through 1993. The Kadee® #500, #502 & #550 represent 50- ton trucks for 100,000 pound cars. HO-Scale Metal Fully Sprung Trucks Features: Ready-To-Mount #148 Metal Whisker® Couplers Code 110 (.110) #520 33" Smooth Back Wheels Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs Package Includes: (2) Each #502 Bettendorf 50-ton Trucks with Coupler Platform (assembled) (2) Each #148 Metal Whisker® Couplers (2) Each Coupler Gearbox (2) Each 0-48 Screw (2) Each Insulated Bushing (2) Each #209 Gray Insulating Fiber Washers .010" (2) #622 Knuckle Springs The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

#583 Arch Bar Self Centering Caboose Trucks with 33" Ribbed Back Wheels - (Leaf Spring) - HO Scale"HGC" Two Piece Fully Equalized Trucks The Self-Centering Action trucks self align themselves parallel with the car for easier placement on track. Mounts with a #2 or 2-56 screw. "HGC" or High Gravity Compound, weighs nearly the same as Metal Trucks but with more detail & a 2 piece split bolster design for more efficient truck equalization, reduced axle friction for greater rolling performance. HO-Scale "HGC" Two Piece Fully Equalized Trucks Features:  Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) #523 33" Ribbed Back Wheels "HGC" Weighs nearly the same as Metal Trucks Superior Rolling Ability Clip on Brake Pads Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Fully Equalized Trucks Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels Patent number 7,434,518 B2 Package Includes: (2) Each #583 Arch Bar Self Centering Caboose Truck (Leaf Spring) (assembled) (2) Clip on Brake Pads (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

#554 Bettendorf T-Section Self Centering Trucks with 33" Ribbed Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with Kadee Self Centering bushing on a flat surface with a #2 or 2-56 screw or without the Kadee Self Centering bushing on a 0.140" or smaller molded on truck post secured with the original screw. The Bettendorf T-Section truck was introduced in the 1920's with a one piece cast sideframe. It had a life similar to the Andrews truck. HO-Scale Metal Fully Sprung Trucks Features:  Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) #523 33" Ribbed Back Wheels Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Self Centering Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs Patent number 5,768,999 Package Includes: (2) Each #554 Bettendorf T-Section Self Centering Trucks (assembled) (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

Available for Special Order onlyShips as soon as product arrives! Estimated Time: 1 - 2 Weeks The SD70ACe is the successor to the older SD70MAC. Built from 2004 to 2014 in the United States, the SD70ACe was originally designed to comply with EPA Tier 2 locomotive emissions regulations. Beginning in 2012, newly built SD70ACes were EPA Tier 3 compliant. SD70ACes are equipped with EMD's 16-710-G3C-T2 prime mover, rated at 4,300 horsepower (3,200 kW). Later Tier 3 models are rated at 4,500 horsepower (3,400 kW). They are rated at 157,000 lbf (700 kN) continuous tractive effort (191,000 lbf (850 kN) starting). Braking effort is rated at 106,000 lbf (470 kN).  Although mechanically similar to earlier SD70 units, the SD70ACe rides on a new underframe and uses mostly new sheet metal above the frame. Electrical cables and air lines have been routed beneath the walkways on opposite sides, allowing easier access for maintenance. Continuing the designs of the SD80 and SD90 series, the radiator on the locomotive is nearly as wide as the cab, the center hood section is a step down below the roofline, and the dynamic brakes have been moved to the rear of the hood. The SD70ACe uses the cab design of late-model SD90MAC-H units, which uses rectangular window glass and is externally different from the two cab variations used on earlier SD70M and SD70MAC units. In 2008, EMD standardized the isolated cab on subsequent SD70ACes after non-isolated cab units were restricted from leading on BNSF Railway due to excessive cab vibration. Our 2022 production is our third run of SD70ACe's in N scale, and our first with our Paragon4 DC/DCC sound & control system.  In this run we are offering models in 18 different paint schemes.   Each one has detail variations accurate for each paint scheme.   The variations include low & high headlight, isolated and non-isolated cab, long and short sunshades, two brake wheel variations, three cab roof variations, and two blower vent layouts.    Industry-leading Model Features:    Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation All Wheel Electrical Pick-up (except for rubber traction tire) ABS Plastic Body with Die Cast Chassis for Maximum Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, and Cut Levers Prototypical Light Operation with Separately Controllable Headlight, Rear Light, Cab Light, and Front Ditch Lights Prototypically Accurate Sounds for an EMD SD70ACe Locomotive Microtrains-compatible Couplers (2) Will Operate on Code 55, Code 70, and Code 80 Rail Minimum Operating Radius:  9.75 inches     Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less

Available for Special Order onlyShips as soon as product arrives! Estimated Time: 1 - 2 Weeks The SD70ACe is the successor to the older SD70MAC. Built from 2004 to 2014 in the United States, the SD70ACe was originally designed to comply with EPA Tier 2 locomotive emissions regulations. Beginning in 2012, newly built SD70ACes were EPA Tier 3 compliant. SD70ACes are equipped with EMD's 16-710-G3C-T2 prime mover, rated at 4,300 horsepower (3,200 kW). Later Tier 3 models are rated at 4,500 horsepower (3,400 kW). They are rated at 157,000 lbf (700 kN) continuous tractive effort (191,000 lbf (850 kN) starting). Braking effort is rated at 106,000 lbf (470 kN).  Although mechanically similar to earlier SD70 units, the SD70ACe rides on a new underframe and uses mostly new sheet metal above the frame. Electrical cables and air lines have been routed beneath the walkways on opposite sides, allowing easier access for maintenance. Continuing the designs of the SD80 and SD90 series, the radiator on the locomotive is nearly as wide as the cab, the center hood section is a step down below the roofline, and the dynamic brakes have been moved to the rear of the hood. The SD70ACe uses the cab design of late-model SD90MAC-H units, which uses rectangular window glass and is externally different from the two cab variations used on earlier SD70M and SD70MAC units. In 2008, EMD standardized the isolated cab on subsequent SD70ACes after non-isolated cab units were restricted from leading on BNSF Railway due to excessive cab vibration. Our 2022 production is our third run of SD70ACe's in N scale, and our first with our Paragon4 DC/DCC sound & control system.  In this run we are offering models in 18 different paint schemes.   Each one has detail variations accurate for each paint scheme.   The variations include low & high headlight, isolated and non-isolated cab, long and short sunshades, two brake wheel variations, three cab roof variations, and two blower vent layouts.    Industry-leading Model Features:    Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation All Wheel Electrical Pick-up (except for rubber traction tire) ABS Plastic Body with Die Cast Chassis for Maximum Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, and Cut Levers Prototypical Light Operation with Separately Controllable Headlight, Rear Light, Cab Light, and Front Ditch Lights Prototypically Accurate Sounds for an EMD SD70ACe Locomotive Microtrains-compatible Couplers (2) Will Operate on Code 55, Code 70, and Code 80 Rail Minimum Operating Radius:  9.75 inches     Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less

The SD70ACe is the successor to the older SD70MAC. Built from 2004 to 2014 in the United States, the SD70ACe was originally designed to comply with EPA Tier 2 locomotive emissions regulations. Beginning in 2012, newly built SD70ACes were EPA Tier 3 compliant. SD70ACes are equipped with EMD's 16-710-G3C-T2 prime mover, rated at 4,300 horsepower (3,200 kW). Later Tier 3 models are rated at 4,500 horsepower (3,400 kW). They are rated at 157,000 lbf (700 kN) continuous tractive effort (191,000 lbf (850 kN) starting). Braking effort is rated at 106,000 lbf (470 kN).  Although mechanically similar to earlier SD70 units, the SD70ACe rides on a new underframe and uses mostly new sheet metal above the frame. Electrical cables and air lines have been routed beneath the walkways on opposite sides, allowing easier access for maintenance. Continuing the designs of the SD80 and SD90 series, the radiator on the locomotive is nearly as wide as the cab, the center hood section is a step down below the roofline, and the dynamic brakes have been moved to the rear of the hood. The SD70ACe uses the cab design of late-model SD90MAC-H units, which uses rectangular window glass and is externally different from the two cab variations used on earlier SD70M and SD70MAC units. In 2008, EMD standardized the isolated cab on subsequent SD70ACes after non-isolated cab units were restricted from leading on BNSF Railway due to excessive cab vibration. Our 2022 production is our third run of SD70ACe's in N scale, and our first with our Paragon4 DC/DCC sound & control system.  In this run we are offering models in 18 different paint schemes.   Each one has detail variations accurate for each paint scheme.   The variations include low & high headlight, isolated and non-isolated cab, long and short sunshades, two brake wheel variations, three cab roof variations, and two blower vent layouts.    Industry-leading Model Features:    Paragon4 Sound & Control System featuring ROLLING THUNDER Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation All Wheel Electrical Pick-up (except for rubber traction tire) ABS Plastic Body with Die Cast Chassis for Maximum Tractive Effort Premium Caliber Painting Prototypically Accurate Paint Schemes and Road Numbers Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, and Cut Levers Prototypical Light Operation with Separately Controllable Headlight, Rear Light, Cab Light, and Front Ditch Lights Prototypically Accurate Sounds for an EMD SD70ACe Locomotive Microtrains-compatible Couplers (2) Will Operate on Code 55, Code 70, and Code 80 Rail Minimum Operating Radius:  9.75 inches     Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less