HO-scale, 4-function decoder that measures 25 x 16 x 6mm with a 9-pin JST to 8-pin NMRA wiring harness that can be used in many DCC-ready models that have an NMRA 8-pin socket. This decoder will operate in both DC and DCC. Dimensions: 25 x 16 x 6mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 DCC Track Voltage: 21 Volts Maximum

Read more less

The A4X is four function HO-scale "drop-in" style mobile decoder for Atlas, Athearn, Kato, etc. locomotives. Examples include the following: Athearn: F59PHI F3 Atlas: RS-1/RS-3/RS-11 C424 GP7 Kato: GP35 If you need more than four total lighting functions, or are using 1.5V bulbs, you should consider the A6X. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for "buzz" free motor performance. DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC. RailCom®: This feature allows the decoder to talk to the command station. RailCom supports expansion for new features. Variable Momentum: Allows you to make custom acceleration and deceleration curves. LED Support: This product does not require external resistors when connecting LED's. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Specs Interface Type: Drop-In Dimensions (L x W x H): 2.85" x 0.682" x 0.138" or 72.39mm x 17.32mm x 3.51mm Scale: HO Scale Continuous/Peak: 1.0/2.0 Amp Total Functions: 4 Function Rating: 100 mA 12V Outputs: 4 LED Outputs: 4

Read more less

Maximize the performance of your N scale model trains with the Digitrax DN167N18 mobile decoder. This plug-in Next18 decoder offers advanced control and smooth operation, enhancing the realism of your layout. With its compact design and easy installation, it's the perfect upgrade for your locomotives. Mobile Decoder Fits Next18 socket locomotives Plug-in Next18 connector Motor drive at connector capacity 6 FX3 Functions More Information Item # DN167N18 Brand Digitrax Scale N MSRP $36.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax SDXH187MT is the perfect addition to your HO scale model trains. With its Series 7 Sound Decoder, this product provides realistic and high-quality sound experience. Being an industry leader, Digitrax guarantees superior performance and compatibility for your model trains. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDXH187MT Brand Digitrax Scale HO Scale MSRP $65.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax DH127PS | Series 7 Mobile Decoder for HO Scale is a must-have for any model railway enthusiast. With its advanced technology and impressive performance, this decoder will bring your HO scale locomotives to life. Enjoy smooth and precise control over your trains with this high-quality decoder. Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and PS-Harness Medium Plug with approximately.1.2" wires 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output More Information Item # DH127PS Brand Digitrax Scale HO MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

While LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable. The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles. Modes The LokPilot 5 Basic is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center. It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255. The LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted. Functions The LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately. Motor The motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. Operational reliability On request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts. Protection Of course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 59020 Brand ESU LLC Scale HO MSRP $29.90 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The Digitrax SDXN167n18 is a powerful and efficient sound decoder specifically designed for N Scale trains. With its easy plug-in installation and series 7 design, this decoder allows for immersive sound and precise control over your train's movements. Enhance your model train experience with the Digitrax SDXN167n18. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits Atlas N FA-1 locomotive and others Plug-in Next18 connector Motor drive at connector capacity 6 FX3 Functions New sound .spjs loadable with Digitrax USB programmer More Information Item # SDXN167n18 Brand Digitrax Scale N MSRP $65.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax SDXO487 is a high-capacity sound decoder designed for multi-scale use. With its advanced features, this decoder offers an immersive and realistic sound experience for your model trains. Its versatility allows you to easily switch between different scales, making it suitable for a wide range of layouts. Experience the power of sound with the Digitrax SDXO487. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many larger locomotives 4 Amp/5 Amps Peak 8 FX3 Functions, 300ma Output 8 Ω Box Speaker 330uF Capacitor New sound .spjs loadable with Digitrax USB programmer More Information Item # SDXO487 Brand Digitrax Scale HO, S, O, G Scale MSRP $89.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The Digitrax DH127MT is a DH127MT Series 7 Mobile Decoder designed for HO Scale model trains. It provides reliable and precise control for your locomotives, allowing for seamless movement on your railway. Boost the performance of your trains with the Digitrax DH127MT. Fits many 21MT equipped HO locomotives Digitrax 21-pin MT socket 1.0 Amp/2 Amps Peak 2 FX7 Functions, 300ma Output More Information Item # DH127MT Brand Digitrax Scale HO MSRP $28.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

Upgrade your model train's performance with the Digitrax DO487 High-Capacity Mobile Decoder. With advanced technology and a high capacity, this decoder allows for precise control and smooth operation. Increase speed and power while maintaining consistent and reliable performance. Perfect for model train enthusiasts and professionals. High-capacity wired Mobile decoder Fits many larger locomotives 4 Amp/5 Amps Peak 8 FX3 Functions, 300ma Output More Information Item # DO487 Brand Digitrax Scale HO, S, O, G Scale MSRP $65.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

This Digitrax SDH187MT is a high-quality Series 7 Sound Decoder designed for HO Scale models. With advanced sound technology, this decoder brings realistic audio to your train layout. Its compact design and easy installation make it a must-have for any model train enthusiast. 2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDH187MT Brand Digitrax Scale HO Scale MSRP $55.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

The full featured, 8 function, hard-wire, G-Scale decoder is tough enough to provide power for large engines, yet capable of creeping at ultra-slow speed due to the excellent TCS auto-adjusting BEMF. The G8 will have your locomotive running like the real thing. With 8 light functions, and easy-to-use screw terminal connections, the G8 has the features you want in a rugged form factor for prolonged outdoor operation. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for "buzz" free motor performance. DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC. RailCom®: This feature allows the decoder to talk to the command station. RailCom supports expansion for new features. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated.   Dimensions: (L x W x H): 3.012”x1.46”x0.526” or 76.52mm x 37.07mm x 13.36mm Scale: G Scale, O Scale Continuous/Peak: 4.0/8.0 Amp Total Functions: 8 Function Rating: 500 mA 12V Outputs: 8

Read more less