Prototype Information: Weighing in at more than 400,000 pounds and with a length in excess of 80 feet and massive 5,000 horsepower tractive effort, the SD80MAC is one of the heaviest, longest, and most powerful single diesel locomotives in the world. Conrail was the first railroad to receive the SD80MAC in early 1996. As it would turn out, Conrail would be the only original buyer of this locomotive, even purchasing both of the demonstrator units. CSX and Norfolk Southern have since acquired these units, using them primarily in coal service. Model Features: Power five-pole KATO motor with dual brass flywheels Directional Headlight and preprinted numberboards Kato magnetic knuckle coupler DCC Friendly mechanism ready for drop-in decoder installation Drop in DCC compatible with the Digitrax DN147K2 More Information Item # 5518 Brand Kato  Scale N Engine Electronics DC Type EMD SD80MAC Road Name Norfolk Southern Road Number 7227 MSRP $155 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Prototype Information: Weighing in at more than 400,000 pounds and with a length in excess of 80 feet and massive 5,000 horsepower tractive effort, the SD80MAC is one of the heaviest, longest, and most powerful single diesel locomotives in the world. Conrail was the first railroad to receive the SD80MAC in early 1996. As it would turn out, Conrail would be the only original buyer of this locomotive, even purchasing both of the demonstrator units. CSX and Norfolk Southern have since acquired these units, using them primarily in coal service. Model Features: Power five-pole KATO motor with dual brass flywheels Directional Headlight and preprinted numberboards Kato magnetic knuckle coupler DCC Friendly mechanism ready for drop-in decoder installation Drop in DCC compatible with the Digitrax DN147K2 More Information Item # 5517 Brand Kato  Scale N Engine Electronics DC Type EMD SD80MAC Road Name Norfolk Southern Road Number 7218 MSRP $155 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Prototype Information: Weighing in at more than 400,000 pounds and with a length in excess of 80 feet and massive 5,000 horsepower tractive effort, the SD80MAC is one of the heaviest, longest, and most powerful single diesel locomotives in the world. Conrail was the first railroad to receive the SD80MAC in early 1996. As it would turn out, Conrail would be the only original buyer of this locomotive, even purchasing both of the demonstrator units. CSX and Norfolk Southern have since acquired these units, using them primarily in coal service. Model Features: Power five-pole KATO motor with dual brass flywheels Directional Headlight and preprinted numberboards Kato magnetic knuckle coupler DCC Friendly mechanism ready for drop-in decoder installation Drop in DCC compatible with the Digitrax DN147K2 More Information Item # 5516 Brand Kato  Scale N Engine Electronics DC Type EMD SD80MAC Road Name Conrail Road Number 4126 MSRP $155 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Prototype Information: Weighing in at more than 400,000 pounds and with a length in excess of 80 feet and massive 5,000 horsepower tractive effort, the SD80MAC is one of the heaviest, longest, and most powerful single diesel locomotives in the world. Conrail was the first railroad to receive the SD80MAC in early 1996. As it would turn out, Conrail would be the only original buyer of this locomotive, even purchasing both of the demonstrator units. CSX and Norfolk Southern have since acquired these units, using them primarily in coal service. Model Features: Power five-pole KATO motor with dual brass flywheels Directional Headlight and preprinted numberboards Kato magnetic knuckle coupler DCC Friendly mechanism ready for drop-in decoder installation Drop in DCC compatible with the Digitrax DN147K2 More Information Item # 5515 Brand Kato  Scale N Engine Electronics DC Type EMD SD80MAC Road Name Conrail Road Number 4114 MSRP $155 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

This Kato EMD SD70ACe with Nose Headlight diesel is based on the high-horsepower road diesel locomotives used in freight service from coast to coast. Features include a nose-mounted headlight, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, a lighting control board that can be swapped for a DCC decoder when you're ready (available separately), fine decoration, directional LED headlights and Kato magnetic knuckle couplers. EMD SD70ACe diesels operate from coast to coast, so this N Scale model will look right at home on your modern-era layout.

Read more less

Brand: JT's Mega Steam Scent: Original Cedar Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

Free USA Shipping Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features 12 Pack DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

Circuitron "Smail" Slow Motion Actuator with Integrated Logic (DCC Decoder Equipped) 12 Pack, 800-6212Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).12 SMAILs per pack. Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

The Circuitron 800-6000 The Tortoise Switch Machine offers multi-scale compatibility and superior performance. With its reliable construction and precise movement, this switch machine is perfect for model train enthusiasts of all levels. Upgrade your layout with the trusted industry expertise of Circuitron. More Information Item # 800-6000 Brand Circuitron  Scale All Scales MSRP $24.95 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable

Read more less

Expertly secure your foam models and dioramas with Woodland Scenics 1432 Foam Nails. With a length of 2 inches and specially designed tips, these nails provide a strong hold without damaging your delicate creations. Trust in these professional-grade foam nails for all your modeling needs. Use Foam Nails to temporarily pin track, foam or other products to your layout. This package contains 75 pieces.

Read more less

Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

With the pride and power of a born leader, the mighty Super Chief thunders along the rails. Spearheading the charge is an F7-A diesel locomotive with the Santa Fe’s distinctive red and silver “war bonnet” paint scheme. The N scale Super Chief ready-to-run set comes complete with: • F7-A locomotive with operating headlight• box car• steel gondola• offset cupola caboose• 24" circle of nickel silver E-Z Track®, including 11 pieces curved track and 1 curved plug-in terminal rerailer• power pack and speed controller• illustrated instruction manual

Read more less