All

The Mast Arm Traffic Lights hang over part of the intersection and are used for intersections located on suburban or small-town roads. They are ready to place right out of the package. They're hand-painted and authentically weathered. The Traffic Lights are pre-wired and made for use with the Just Plug® Lighting System. Single-faced and includes two red and two green lights, enough for one 4-way intersection. 4 Mast Arm Traffic Lights (2 red / 2 green) each with 36 in (91.4 cm) wire 2 Linker Plugs RoHS Compliant

Read more less

Rag-top down and summer in mind, this convertible is ready for a Sunday drive. Just Plug® Vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layout's traffic has never looked so realistic. Add a Vehicle to a Just Plug Light Hub for easy installation. Just Plug and you're done! 20mA per Vehicle RoHS Compliant

Read more less

This little pickup still has a few thousand miles left and is up for anything. Just Plug® Vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layout's traffic has never looked so realistic. Add a Vehicle to a Just Plug Light Hub for easy installation. Just Plug and you're done! 20mA per Vehicle RoHS Compliant

Read more less

Stop in for a drink and enjoy a game while you're there-Lanes Bowling & Bar is ready to roll. This billboard advertises the local bar scene and features 3D artwork that is sure to pop along any building or roadway. This Billboard includes pre-installed LED lighting made for use with the Just Plug® Lighting System. 20mA Colors may vary from actual product. ROHS Compliant

Read more less

Enjoy a night out on the town with the wisest choice of cigars around. Wise Tobacco Co. advertises all of your tobacco needs. This smoking hot billboard will shine from even the tallest rooftop. This Billboard includes pre-installed LED lighting made for use with the Just Plug® Lighting System. 20mA Colors may vary from actual product. ROHS Compliant

Read more less

3-7/16" 8.8cm Wire Leads, Includes Heat-Shrink Tubin Wire harness, 18-pin Next18 socket to open wires, 88mm, with heat shrink tube. WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

Multi Scale  5 x 3.6" Tall: 26 feet in HO, 48 feet on N 7 x 4.3" Tall: 31 feet in HO, 57 feet on N 12 Pieces Total A Great Value

Read more less

Multi Scale  2" Tall: 14.5 feet in HO, 26.5 feet on N 12 Pieces Total A Great Value

Read more less

15 pack of Peel. Stick. 'n Light.  Easy to install & ready to use! 12 to 16 volts Use an AC or DC power supply or batteries Lights are connected to 11 inch wire Each light contains two-sided tape to allow attachment to a flat surface Great for Dollhouses, Train layouts, Buildings, Models & more!

Read more less

HO Scale Metal pole and arms LED lights for low current drain Ready to use with resistors attached Designed for easy mounting Great for use as parking lot lights  2 lights in the package

Read more less

Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices. DYNAMIC DIGITAL EXHAUST For added realism, you’ll love SoundTraxx's reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible. HIGH QUALITY SOUND LIBRARYSoundTraxx's large selection of high quality sound effects include:  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profile  Up to 12 Bells  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONThe BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models. This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Dimensions: 41.9 x 18.8 x 6.8mm  Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16   Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide   Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference   Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

Read more less

Bar Mills has solved a modeling dilemma for HO Scale modelers: adding realistic sidewalks to street scenes. Sidewalks from Bar Mills are made from a specially imported paper material that has the proper texture and thickness. The sidewalks come precolored in a dirty concrete color, are laser-cut to size and include laser-etched crack and curb lines. The material is flexible, so applying them to your layout surface is easy even if there are grades or surface irregularities along the pavement's edge. HO Scale Laser Cut Wood Kit 300 Scale feet of laser cut wood sidewalk

Read more less