Gift Ideas Under $250.00

1545 products


  • SoundTraxx 810140 | CurrentKeeper™

    SoundTraxx SoundTraxx 810140 | CurrentKeeper™

    4 reviews

    2 in stock

    The SoundTraxx CurrentKeeper™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet. It measures 40 x 6 x 11mm.

    2 in stock

    $26.36

  • Squeaky's Trains #43 | HO Scale Rerailer | 2 Pack Squeaky's Trains #43 | HO Scale Rerailer | 2 Pack

    Squeaky's Trains Squeaky's Trains #43 | HO Scale Rerailer | 2 Pack

    7 reviews

    9 in stock

    3D Printed HO Scale Rerailer’s uniquely created by Squeaky’s Trains & Things. Condition: New Quantity: 2 Pack, long and short rerailers. Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Scale: HO Scale (Long) Length: 8.85″ / 22.5cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Scale: HO Scale (Short) Length: 5.83″ / 14.8cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Notes:  Logo sign, rails and Freight Car not included.

    9 in stock

    $3.98

  • SoundTraxx 884007 | TSU-2200 Steam-2 Digital Sound Decoder | Tsunami2 2-amp SoundTraxx 884007 | TSU-2200 Steam-2 Digital Sound Decoder | Tsunami2 2-amp

    SoundTraxx SoundTraxx 884007 | TSU-2200 Steam-2 Digital Sound Decoder | Tsunami2 2-amp

    7 reviews

    2 in stock

    The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam-2 Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

    2 in stock

    $107.16

  • SoundTraxx 810154 | Mini Cube Oval Speaker/Baffle

    SoundTraxx SoundTraxx 810154 | Mini Cube Oval Speaker/Baffle | HO Scale

    1 review

    1 in stock

    This tiny speaker comes with a properly proportioned speaker enclosure and provides great results for space-constrained models! Dimensions: 16 x 12 x 11.3mm(D)Frequency Response: 300Hz – 20kHzPower: .7 Watts (Nominal) 1 Watt (Peak)Impedance: 8 Ohms Note: When using this speaker with a decoder that has a two watt amplifier, it must be wired in series with another 1 watt speaker.

    1 in stock

    $12.76

  • SoundTraxx 810153 | 28mm (1″) 8-ohm, 2 Watt Round Speaker SoundTraxx 810153 | 28mm (1″) 8-ohm, 2 Watt Round Speaker

    SoundTraxx SoundTraxx 810153 | 28mm (1″) 8-ohm, 2 Watt Round Speaker

    2 reviews

    4 in stock

    Suitable for many HO and larger models. Dimensions: 28 x 4.5mm(D)Frequency Response: 320 Hz – 18kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

    4 in stock

    $10.36

  • NixTrainz | Decoder Buddy Version 5B (12 Outputs) NixTrainz | Decoder Buddy Version 5B (12 Outputs)

    NixTrainz NixTrainz | Decoder Buddy Version 5B (2.2K Ohm, 8 Outputs)

    2 reviews

    16 in stock

    This product is versatile in terms of direction of the placement of the board and mounting in various configurations.  It can easily replace a QSI board, a Dual Mode decoder board or be mounted directly on the electric motor or frame with Kapton tape.  (It is recommended that a piece of Kapton tape be placed on the bottom of the mother board to assure electrical isolation from the electric motor or frame.) This mother board does not include a 21 Pin Decoder. This mother board and connector board require soldering. These printed circuit boards are NOT INTENDED FOR USE IN A DC SYSTEM. The on board resistors are sized for LEDs. (2.2K)  V5 (old) vs V5B (current) The V5 has the capability of easily adding a two wire stay alive.  The U+ and the GND pads are positioned close together and work well.  The three wire stay alive or Power Pack has a third wire that could be connected to pin-1 on the base of the 21-pin connector.  Pin -1 is associated with Aux 10 on a Loksound 5 decoder and used to turn the Power Pack off and on.  It is used frequently but not as easy to solder to as a pad.  I have a video on my Facebook page of the procedure.   The V5B has a dedicated pad for the white control wire of the Power Pack and is labeled "W".  Now there are six pads in the row of soldering pads on the bottom of the board just under the small light connector board in the picture on the right.  They are, right to left; W, U+, GND, A12, A11 and U+.  The other difference is that the "W" pad is connected to pin-2 of the 21-pin connector and the Aux 7 function controls the Power Pack on this board.  It is the default function assigned to the LokSound 5 decoders.  Package Includes: 1x Mother Board 1x Connector Board Dimensions: 0.67" x 2.20" x 0.35" (17 mm x 56 mm x 0.9 mm)The mother board includes;  One 21 Pin Decoder receptacle, Two pairs of track input pads, One pair of motor input pads, One pair of stay alive pads (U+ and GND), Pads for two Aux functions (Version 5 Feature) Two pairs of speaker pads wired in parallel, Resistors for use with LED lighting. (on board 2.2K)  The connector board contains pads for twelve pairs of lighting function connections. U+ or the blue wire has twelve connected pads for the common power source. The negative (-) discrete function pads are all labeled to indicate their connection to the functions available in the decoder. The lighting connector was designed so that the shell of the diesel locomotive can be easily separated from the frame without un-soldering wires. This does require that the headlight and rear lights be mounted in the shell of the locomotive and that the diesel has a removable dynamic brake shell. Incandescent lamps or bulbs are not well suited for the Decoder Buddys or associated decoders.  It can be done but it will require more electronics to achieve a result.  Our recommendation is to go with LEDs.

    16 in stock

    $10.99

  • Sale NixTrainz | Decoder Buddy Mini (1k Ohm Resistors Onboard) NixTrainz | Decoder Buddy Mini (1k Ohm Resistors Onboard)

    NixTrainz NixTrainz | Decoder Buddy Mini (1k Ohm Resistors Onboard)

    1 review

    11 in stock

    The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications.  there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is  NOT INTENDED FOR USE IN A DC SYSTEM. The mother board includes:  One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".)  It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!!  The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation.  Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)

    11 in stock

    $10.99$9.89

  • SoundTraxx 885813 | TSU-PNP8 8 Function – Tsunami2 (2-amp) EMD Diesel Sound Decoder SoundTraxx 885813 | TSU-PNP8 8 Function – Tsunami2 (2-amp) EMD Diesel Sound Decoder

    SoundTraxx SoundTraxx 885813 | TSU-PNP8 8 Function – Tsunami2 (2-amp) EMD Diesel Sound Decoder

    2 reviews

    5 in stock

    The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.

    5 in stock

    $98.36

  • Squeaky's Trains | Temporary Concrete Barriers | HO Scale Squeaky's Trains | Temporary Concrete Barriers | HO Scale

    Squeaky's Trains Squeaky's Trains | Temporary Concrete Barriers | HO Scale

    3 reviews

    Out of stock

    Squeaky’s Trains – HO Scale – “Jersey” Concrete Traffic Barriers Our “Jersey” Temporary Concrete Barriers are HO scale accurate, 100% exclusive and only available from Squeaky’s Trains. Each and every barrier goes through an inspection to insure the best quality possible. Condition: New Scale: HO Scale Accurate Sizes Length: See Size Options Height:  0.35″ / 9.0mm Width: 0.31″ / 8.0mm Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Finish/Color: Unpainted, gray. Notes: Vehicles, coin, or other props not included.  Looking to purchase in bulk? Contact us for pricing.

    Out of stock

    $4.97 - $11.97

  • Bowser Trains 22 | Foam Work Cradle | Locomotive & Freight Car Tool | HO Scale

    Bowser Trains Bowser Trains 22 | Foam Work Cradle | Locomotive & Freight Car Tool | HO Scale

    1 review

    7 in stock

    The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For HO Scale models Dimensions: 6"w x 11"

    7 in stock

    $11.99

  • Sale Squeaky's Trains | 18″ Traffic/Construction Cones | HO Scale Squeaky's Trains | 18″ Traffic/Construction Cones | HO Scale

    Squeaky's Trains Squeaky's Trains | 18″ Traffic/Construction Cones | HO Scale

    2 reviews

    2 in stock

    Hand Crafted 18″ Construction Cones uniquely created by Squeaky’s Trains & Things. 10 Pack 3D printed with high quality materials. HO Scale Size: 0.19″ / 5.0mm (1:87) Hand painted, each cone is unique. Unpainted version also available. Notes: Vehicle Not Included. Unpainted or un-finished 3D printed models may come in any base color that was available for use at the time of printing. Base color requests are accepted but not always possible to fulfill. Please, no returns or refunds for base color reasons.

    2 in stock

    $0.16 - $1.99

  • Circuitron 800-6006 | Tortoise Switch Machine Value 6 Pack | Multi Scale

    Circuitron Circuitron 800-6006 | Tortoise Switch Machine Value 6 Pack | Multi Scale

    8 reviews

    1 in stock

    The Circuitron Tortoise Switch Machine (6 Pack) Motor stalls at each end of throw No cutoff contact necessary Precision engineered gear-drive mechanism Enclosed construction Constant tension on switch points Ultra-Simple Mounting! No additional brackets or linkage necessary Fulcrum adjusts for use in all scales - Z to G. Prototypical Slow Motion Action! 3 seconds to complete the throw Convenient Auxiliary Contacts! 2 sets SPDT provided for powering the frogs or signals

    1 in stock

    $109.99

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • Amazon
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account