Gift Ideas Under $10.00
Squeaky's Trains Squeaky's Trains #43 | HO Scale Rerailer | 2 Pack
3D Printed HO Scale Rerailer’s uniquely created by Squeaky’s Trains & Things. Condition: New Quantity: 2 Pack, long and short rerailers. Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Scale: HO Scale (Long) Length: 8.85″ / 22.5cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Scale: HO Scale (Short) Length: 5.83″ / 14.8cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Notes: Logo sign, rails and Freight Car not included.
$3.98
Woodland Scenics Woodland Scenics 639 | Static King Static Grass Applicator - Field System | Multi Scale
Static King makes it easy to model large grassy areas and ensures Static Grass is applied vertically. The Static King has an ergonomic design and can be placed upside down for easy filling. It comes with different Sieve sizes for creating a varied effect using 2-12 mm lengths of Static Grass. A divider allows the use of multiple colors and sizes at the same time for modeling realistic fields and other tall grasses. The clear hopper ensures you always know how much Static Grass you have left. Built-in bleed-off function allows it to discharge safely on its own. Power is supplied via a Power Supply or battery. Indicator light makes it easy to know if the Static King is turned on. Batteries and/or power supply not included, available as Add-On.
$67.49 - $84.82
Atlas Model Railroad Co. Atlas 170 | Code 100 & 83 Rail Joiners 48 Pack Nickel Silver | HO Scale
Description Code 100 & 83 HO Scale Nickel Silver 48 Pack
$3.59
Squeaky's Trains Squeaky's Trains | Temporary Concrete Barriers | HO Scale
Squeaky’s Trains – HO Scale – “Jersey” Concrete Traffic Barriers Our “Jersey” Temporary Concrete Barriers are HO scale accurate, 100% exclusive and only available from Squeaky’s Trains. Each and every barrier goes through an inspection to insure the best quality possible. Condition: New Scale: HO Scale Accurate Sizes Length: See Size Options Height: 0.35″ / 9.0mm Width: 0.31″ / 8.0mm Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Finish/Color: Unpainted, gray. Notes: Vehicles, coin, or other props not included. Looking to purchase in bulk? Contact us for pricing.
$4.97 - $11.97
NixTrainz NixTrainz | Decoder Buddy Mini (1k Ohm Resistors Onboard)
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM. The mother board includes: One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".) It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!! The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation. Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)
$10.99$9.89
Squeaky's Trains Squeaky's Trains | 18″ Traffic/Construction Cones | HO Scale
Hand Crafted 18″ Construction Cones uniquely created by Squeaky’s Trains & Things. 10 Pack 3D printed with high quality materials. HO Scale Size: 0.19″ / 5.0mm (1:87) Hand painted, each cone is unique. Unpainted version also available. Notes: Vehicle Not Included. Unpainted or un-finished 3D printed models may come in any base color that was available for use at the time of printing. Base color requests are accepted but not always possible to fulfill. Please, no returns or refunds for base color reasons.
$0.16 - $1.99
Woodland Scenics Woodland Scenics 619 | Static Grass Light Green 4mm
Static Grass 42 grams Grass length: 4mm
$4.49$4.04
Woodland Scenics Woodland Scenics 618 | Static Grass Medium Green 4mm | Multi Scale
Static Grass 42 grams Grass length: 3mm
$4.59
Woodland Scenics Woodland Scenics 613 | Static Grass Dark Green 2mm | Multi Scale
Static Grass 70 grams Grass length: 2mm
$4.59
Woodland Scenics Woodland Scenics 621 | Static Grass Dark Green 7mm
Static Grass 42 grams Grass length: 7mm
$4.49$4.04
Woodland Scenics Woodland Scenics 644 | Static-Tac® | Multi Scale
Static-Tac is specially formulated and has the right viscosity for adhering Static Grass and Briar Patch. It comes in a bottle with a graduated tip that works for large or small areas. Static-Tac is an easy-to-spread adhesive that dries to a clear matte finish for realistic results.
$8.39$7.55
Woodland Scenics Woodland Scenics 617 | Static Grass Dark Green 4mm
Static Grass 42 grams Grass length: 3mm
$4.59
