Wheels, Couplers & Detail Kits

WalthersProto HO Scale 33" Turned Metal Wheelsets with Metal Axles are a fast and economical way to upgrade your equipment. These 12-packs of RP-25 wheelsets are great replacements for those used on most freight cars. 33" Turned Metal Wheelsets are part of the line of WalthersProto HO Scale trucks, wheels and couplers. High quality turned metal RP-25 wheels for improved performance Easy upgrade for most HO equipment Standard wheel size fits most freight and passenger equipment Fits steam, diesel and modern-era rolling stock Ultra-smooth rolling metal axles Fully-assembled and ready to use Converts up to three cars More Information Item # 2300 Brand WalthersProto Scale HO MSRP $12.98

Read more less

Make your WalthersMainline locos even more realistic in minutes with this Diesel Detail Kit! The complete set of HO grab irons fits the standard locations on the model, and they're made of durable, factory-formed stainless steel wire. The set details one model and includes illustrated instructions. Parts in this 25-piece set include: 4 front drop grab irons 8 small straight nose grab irons 4 long straight nose grab iron 2 rear pilot grab irons 2 long end handrail grab irons 2 drop grab irons for long hood behind cab 3 drop grab irons for rear inverter box 2 plastic injected cut levers More Information Item # 910-250 Brand WalthersMainline Scale HO Type Diesel Detail Kit Use With Walthers Mainline 910-10200, 910-10201 Model shown not included.

Read more less

Make your passenger cars even more realistic with this set of add-on details made especially for WalthersMainline HO models. There's a full set of durable formed stainless steel grab irons, along with body-mounted coupler boxes with a swinging drawbar, bushing and cover for improved operation on 24" and larger curves. Parts for one car are included along with complete illustrated instructions.

Read more less

This industry leading coupler features an all metal standard coupler, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The NO.5® Magne-Matic® Metal Coupler may be mounted with the included #232 Gearbox or with other manufacturers cast-on coupler pockets. The 148 Whisker® Coupler is equivalent to the NO.5® Metal Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #28 coupler. HO-Scale Package Includes: (2) Pair NO.5® Metal Couplers - Medium Centerset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair #232 Gearboxes (2) #622 Knuckle Springs NO.5® Metal Coupler Features: Material  -   Metal Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   Standard Head Works In Place of  -   #58, #28, #118, #119, #148, #158, most medium centerset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #232 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)

Read more less

This industry leading coupler features an all metal standard coupler, and #634 standard centering spring and comes complete with an insulated draft gearbox and lid. The #58 Magne-Matic® "Scale" Metal Coupler may be mounted with the included #232 Gearbox or with other manufacturers cast-on coupler pockets. The 158 "Scale" Whisker® Coupler is equivalent to the #58 "Scale" Metal Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox. HO-Scale Package Includes: (2) Pair #58 "Scale" Metal Couplers - Medium Centerset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair #232 Gearboxes (2) #625 Knuckle Springs #58 Metal Coupler Features: Material  -   Metal Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #625 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   "Scale" Head Works In Place of  -   NO.5®, #28, #118, #119, #148, #158, most medium centerset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #232 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)

Read more less

WalthersProto HO Scale 33" Turned Metal Wheelsets with Plastic Axles are a fast and economical way to upgrade your equipment. These 12-packs of RP-25 wheelsets are great replacements for those used on most freight cars. 33" Turned Metal Wheelsets are part of the line of WalthersProto HO Scale trucks, wheels and couplers. High quality turned metal RP-25 wheels for improved performance Easy upgrade for most HO equipment Standard wheel size fits most freight and passenger equipment Fits steam, diesel and modern-era rolling stock Ultra-smooth rolling plastic axles Fully-assembled and ready to use Converts up to three cars More Information Item # 2301 Brand WalthersProto Scale HO MSRP $11.98

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #31 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #141 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #31 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #31 Plastic Shank Couplers - Long Underset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #31 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Underset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #31 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #31 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   13/32" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Multi-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #1020 Coupler & Special Purpose Tweezers

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #36 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #146 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #36 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. Other Whisker® Coupler #36 equivalent options include #156 Whisker® "Scale" Metal Coupler when mounted a #252 Snap-together Gearbox. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair #36 Plastic Shank Couplers - Long Centerset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #36 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Long (25/64") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #36 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #36 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Multi-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #1020 Coupler & Special Purpose Tweezers

Read more less

#532 - 36" Diameter Smooth Back Wheelsets (Code 88) - HO Scale Smooth wheelsets are most commonly found on diesel era rolling stock. Kadee® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 88 (.088") 36" Smooth Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #532 36" Diameter Smooth Back Wheelsets (Code 88)   The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

#232 HO Scale Plastic Gearboxes & Lids - #5 Style Plastic Draft Gearboxes & Lids included with NO.5, 58, 20-Series (medium & long shank), Couplers. Also works with medium & long shank Whisker® Couplers.10 pair per package 2-56 screws are the most commonly used for center hole. 0-48 or 0-80 screws are used for side holes. Screw length will very depending on the mounting situation.

Read more less