DCC Decoders

The SoundTraxx 885032 is a TSU-KN1 Tsunami2 digital sound decoder with the Kato N sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the first plug-and-play Tsunami2 for Kato N-scale locomotives, supplied with a full install kit, rated 500mA and suited to N scale (Kato). Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 8 prime movers spanning EMD, GE and ALCO: EMD 567C 16-cylinder non-turbo, EMD Dual 567 (E-units), EMD 645E 12-cylinder turbo, EMD 645F 16-cylinder turbo, EMD 645E 20-cylinder turbo, EMD 645 Turbo 2nd generation, GE 7FDL-16, ALCO 244 Turbo Complete install kit included: decoder, Mini Cube 3 speaker and baffle, speaker wire, Kapton tape and two Sunny White LEDs 44 air horns and 14 bells, plus air compressors Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885032 Model: TSU-KN1 Tsunami2 Sound Set: Kato N Diesel (Kato N) Scale: N scale (Kato) Decoder Size: 55 x 13.8 x 3.2mm Connection: Plug-and-play board replacement for Kato N-scale locomotives Max. Motor Stall Current: 500mA Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker and baffle are included in the box. Find extra install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 55 x 13.8 x 3.2mm and connects by plug-and-play board replacement for kato n-scale locomotives. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Do I need to buy anything else?No. The TSU-KN1 ships as a complete kit — decoder, Mini Cube 3 speaker and baffle, speaker wire, Kapton tape and two Sunny White LEDs. It is designed for Kato N-scale E-units, F-units, F40PH, PA and P42 locomotives. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885001 is a TSU-1100 Tsunami2 digital sound decoder with the EMD sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a compact universal-style decoder for tight installs, rated 1A and suited to small models with minimal space. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 9 EMD prime movers: EMD 567 No Transition, EMD 567 Non-Turbo, EMD 567 Turbo, EMD Dual 567, EMD 645 Non-Turbo, EMD 645 Turbo, EMD Dual 645 Turbo, EMD 710 Turbo, EMD 710 G3C-T2 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885001 Model: TSU-1100 Tsunami2 Sound Set: EMD Diesel Scale: small models with minimal space Decoder Size: 27 x 10.5 x 5mm Connection: Universal-style hardwire Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 27 x 10.5 x 5mm and connects by universal-style hardwire. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD or EMD-2 — which do I want?This is the EMD set: the common 567, 645 and 710 prime movers. The separate EMD-2 set carries a second group of less-common variants called out by cylinder count. Match the list above to your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

While LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable. The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles. Modes The LokPilot 5 Basic is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center. It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255. The LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted. Functions The LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately. Motor The motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. Operational reliability On request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts. Protection Of course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 59020 Brand ESU LLC Scale HO MSRP $29.90 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The SoundTraxx 885030 is a TSU-N18 Tsunami2 digital sound decoder with the EMD-2 sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the Next18 decoder for N and small HO models, rated 1A and suited to N and small HO models with a Next18 socket. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 8 EMD-2 prime movers: EMD 567 12-cylinder (no transition), EMD 567C 16-cylinder non-turbo, EMD 645E 12-cylinder non-turbo, EMD 645E 12-cylinder turbo, EMD 645F 16-cylinder turbo, EMD 645E 20-cylinder turbo, EMD 710G 12-cylinder, EMD 710G 16-cylinder Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885030 Model: TSU-N18 Tsunami2 Sound Set: EMD-2 Diesel Scale: N and small HO models with a Next18 socket Decoder Size: 25 x 9.5 x 4.1mm Connection: Next18 (N18) socket Max. Motor Stall Current: 1A Function Outputs: 6 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 25 x 9.5 x 4.1mm and connects by next18 (n18) socket. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD-2 or plain EMD — which do I want?This is the EMD-2 set: less-common EMD prime movers, named by cylinder count. The plain EMD set covers the more common 567/645/710 variants. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885004 is a TSU-1100 Tsunami2 digital sound decoder with the Baldwin & Other sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a compact universal-style decoder for tight installs, rated 1A and suited to small models with minimal space. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 12 Baldwin & Other prime movers: Baldwin VO, Baldwin 608NA, Baldwin 608A, Baldwin 606NA, Rio Grande Southern Galloping Goose, Dual Whitcomb, Fairbanks-Morse, GE GTEL UP “Slab Side”, GE GTEL UP “Veranda”, GE GTEL UP “Big Blow” A unit, GE GTEL UP “Big Blow” B unit, Cummins QSK19C x3 GenSet Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885004 Model: TSU-1100 Tsunami2 Sound Set: Baldwin & Other Diesel Scale: small models with minimal space Decoder Size: 27 x 10.5 x 5mm Connection: Universal-style hardwire Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other Baldwin & Other sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 27 x 10.5 x 5mm and connects by universal-style hardwire. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 12 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885027 is a TSU-N18 Tsunami2 digital sound decoder with the GE sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the Next18 decoder for N and small HO models, rated 1A and suited to N and small HO models with a Next18 socket. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 8 GE prime movers: GE FDL-12, GE FDL-16, GE 7FDL-16, GE Dual FDL-16, GE GEVO G12, GE 44-Ton Center Cab Dual Caterpillar, GE Cummins Switcher, GEVO G12 Tier 4 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885027 Model: TSU-N18 Tsunami2 Sound Set: GE Diesel Scale: N and small HO models with a Next18 socket Decoder Size: 25 x 9.5 x 4.1mm Connection: Next18 (N18) socket Max. Motor Stall Current: 1A Function Outputs: 6 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other GE sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 25 x 9.5 x 4.1mm and connects by next18 (n18) socket. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The TCS FL4 is a function-only DCC decoder for any scale, adding up to four extra lighting and effect outputs wherever you need them — commonly used for smoke coils, fireboxes, ditch lights, and step lights. Note: FL-series "Fleet Lighter" decoders do not provide motor control, so pair the FL4 with a separate mobile decoder. Browse more DCC Decoders and DCC Accessories, or shop the full Train Control Systems lineup. Features Function-only decoder — adds up to four lighting and effect outputs. Works in any scale; great for smoke coils, fireboxes, ditch lights, and step lights. Pairs with any mobile (motor) decoder — the FL4 handles lights only. Compact "Fleet Lighter" design fits where a full decoder will not. More Information Brand Train Control Systems (TCS) Item Number 1004 (FL4) Type Function-Only DCC Decoder (Fleet Lighter) Functions 4 Motor Control No (function-only) Scale Any Scale Condition New FAQ Does the FL4 control the motor?No — FL-series decoders are function-only. Use a separate mobile decoder for the motor and let the FL4 drive extra lights and effects. What is it used for?Lighting and effects the main decoder cannot handle — smoke coils, fireboxes, ditch lights, step lights, and similar. What scales can use it?Any scale — it is a small, universal function decoder.

Read more less

The SoundTraxx 885003 is a TSU-1100 Tsunami2 digital sound decoder with the ALCO sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a compact universal-style decoder for tight installs, rated 1A and suited to small models with minimal space. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 9 ALCO prime movers: ALCO 539 Turbo, ALCO 539 Non-Turbo, ALCO 244 Turbo, ALCO 251A i6, ALCO 251C v12, ALCO 251C v12 Super Charged, ALCO 251C v12 Century Series, ALCO 251C v16, ALCO 251C v16 Super Charged Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885003 Model: TSU-1100 Tsunami2 Sound Set: ALCO Diesel Scale: small models with minimal space Decoder Size: 27 x 10.5 x 5mm Connection: Universal-style hardwire Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other ALCO sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 27 x 10.5 x 5mm and connects by universal-style hardwire. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885021 is a TSU-1100 Tsunami2 digital sound decoder with the EMD-2 sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a compact universal-style decoder for tight installs, rated 1A and suited to small models with minimal space. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 8 EMD-2 prime movers: EMD 567 12-cylinder (no transition), EMD 567C 16-cylinder non-turbo, EMD 645E 12-cylinder non-turbo, EMD 645E 12-cylinder turbo, EMD 645F 16-cylinder turbo, EMD 645E 20-cylinder turbo, EMD 710G 12-cylinder, EMD 710G 16-cylinder Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885021 Model: TSU-1100 Tsunami2 Sound Set: EMD-2 Diesel Scale: small models with minimal space Decoder Size: 27 x 10.5 x 5mm Connection: Universal-style hardwire Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD-2 sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 27 x 10.5 x 5mm and connects by universal-style hardwire. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD-2 or plain EMD — which do I want?This is the EMD-2 set: less-common EMD prime movers, named by cylinder count. The plain EMD set covers the more common 567/645/710 variants. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885601 is a BLU-1100 Blunami digital sound decoder with the EMD sound set. Blunami is a Tsunami2 with a Bluetooth radio added, so it runs three ways: as a normal DCC decoder on any NMRA-compliant system, on plain DC, or in wireless mode straight from your phone or tablet. Wireless mode needs no command station and no programming track — an old DC power pack and the free Blunami app are enough, and CVs can be read and changed over Bluetooth while the locomotive is running. The app is free for iOS and Android. This version is the most compact decoder in the Blunami line — small enough for N scale, suited to N, HO and small S scale. Features 9 EMD prime movers: EMD 567 No Transition, EMD 567 Non-Turbo, EMD 567 Turbo, EMD Dual 567, EMD 645 Non-Turbo, EMD 645 Turbo, EMD Dual 645 Turbo, EMD 710 Turbo, EMD 710 G3C-T2 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Bluetooth control from the free Blunami app (iOS and Android) — over 300 settings without editing a single CV by hand Dynamic Digital Exhaust (DDE) automatically matches exhaust volume and RPM to the load on the motor, and the app calibrates it for you Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885601 Model: BLU-1100 Blunami Sound Set: EMD Diesel Scale: N, HO and small S scale Decoder Size: 31 x 10.5 x 5mm Connection: Hardwire (single wires) Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Control Modes: DC, DCC and Bluetooth wireless Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Do I need a DCC system to use this?No. That is the point of Blunami. It runs on a plain DC power pack with no command station at all — you control it from the free Blunami app over Bluetooth. It is also a fully NMRA-compliant DCC decoder if you already run DCC. Does the app work on Android?Yes. The free Blunami app is published for both iOS and Android. (Some older listings and dealer pages still say iOS only — that is out of date.) Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable in the app or via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD or EMD-2 — which do I want?This is the EMD set: the common 567, 645 and 710 prime movers. The separate EMD-2 set carries a second group of less-common variants with specific cylinder counts. Check your locomotive’s prime mover against the list above before ordering. Will it fit my locomotive?This one measures 31 x 10.5 x 5mm and connects by hardwire (single wires). Check the space in your shell against that footprint before ordering — other Blunami versions use different connectors and sizes.

Read more less

The SoundTraxx 885026 is a TSU-N18 Tsunami2 digital sound decoder with the EMD sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is the Next18 decoder for N and small HO models, rated 1A and suited to N and small HO models with a Next18 socket. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 9 EMD prime movers: EMD 567 No Transition, EMD 567 Non-Turbo, EMD 567 Turbo, EMD Dual 567, EMD 645 Non-Turbo, EMD 645 Turbo, EMD Dual 645 Turbo, EMD 710 Turbo, EMD 710 G3C-T2 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 6 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885026 Model: TSU-N18 Tsunami2 Sound Set: EMD Diesel Scale: N and small HO models with a Next18 socket Decoder Size: 25 x 9.5 x 4.1mm Connection: Next18 (N18) socket Max. Motor Stall Current: 1A Function Outputs: 6 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other EMD / EMD-2 Diesel decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 25 x 9.5 x 4.1mm and connects by next18 (n18) socket. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 9 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. EMD or EMD-2 — which do I want?This is the EMD set: the common 567, 645 and 710 prime movers. The separate EMD-2 set carries a second group of less-common variants called out by cylinder count. Match the list above to your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less

The SoundTraxx 885002 is a TSU-1100 Tsunami2 digital sound decoder with the GE sound set. Tsunami2 combines a 16-bit sound system, Hyperdrive2 motor control, Hyperlight lighting effects and a full NMRA-compliant DCC decoder on one board, driven by a 32-bit processor with 16 polyphonic sound channels. This version is a compact universal-style decoder for tight installs, rated 1A and suited to small models with minimal space. Dynamic Digital Exhaust reads the load on the motor and notches the engine up and down on its own, so the locomotive sounds like it is working for its train. Features 8 GE prime movers: GE FDL-12, GE FDL-16, GE 7FDL-16, GE Dual FDL-16, GE GEVO G12, GE 44-Ton Center Cab Dual Caterpillar, GE Cummins Switcher, GEVO G12 Tier 4 Over 40 air horns and 13 bells, plus air compressors, couplers and dynamos Dynamic Digital Exhaust (DDE) matches exhaust volume and RPM to the load on the motor automatically Three braking types: independent, train and dynamic braking Hyperdrive2 motor control for smooth, creep-speed switching Over 20 Hyperlight lighting effects across 4 function outputs 16 polyphonic sound channels on a 32-bit processor, with a 7-band equalizer and adjustable reverb CurrentKeeper ready — works with the SoundTraxx 810140 CurrentKeeper More Information Item Number: SoundTraxx 885002 Model: TSU-1100 Tsunami2 Sound Set: GE Diesel Scale: small models with minimal space Decoder Size: 27 x 10.5 x 5mm Connection: Universal-style hardwire Max. Motor Stall Current: 1A Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7V – 22V Sound Channels: 16 polyphonic Processor: 32-bit, 28 functions Shop the full SoundTraxx range, compare every DCC decoder we stock, or see the other GE sound profile decoders. A speaker is not included — browse DCC speakers rated 1 watt or better, and find install parts in DCC wiring. Add a SoundTraxx 810140 CurrentKeeper to keep sound alive over dirty track and turnouts. FAQ Will this fit my locomotive?It measures 27 x 10.5 x 5mm and connects by universal-style hardwire. Check that against the space in your shell before ordering — other Tsunami2 versions use different connectors and sizes. Is a speaker included?No. Pair it with an 8-ohm speaker rated 1 watt or better that fits your shell. Which prime movers do I get?All 8 listed above, selectable via CV 123. You are not locked to one engine sound — pick whichever matches your prototype. Does it run on DC?Yes. Tsunami2 runs on a standard DC power pack as well as DCC, though sound and lighting options are limited on DC. Full function control needs a DCC system.

Read more less