DCC Speakers

The SoundTraxx 810129 is the 23mm Square Mega Bass Speaker 8-ohm 2 watt. This speaker is perfect for enhancing the low bass sounds that are found in most diesel decoders. It is well worth the extra effort! Specifications Item Number: SoundTraxx 810129 Dimensions: 23 x 23 x 10.2mm(D) Frequency Response: 275Hz – 20kHz Power: 2 Watts (Nominal) 4 Watts (Peak) Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810155 is the Mini Cube 2 Oval Speaker/Baffle. SoundTraxx’s tiniest speaker comes with a properly proportioned speaker enclosure and provides remarkable volume for tiny models! Specifications Item Number: SoundTraxx 810155 Dimensions: 13 x 9 x 9.4mm(D) Frequency Response: 100Hz – 10kHz Power: 40mW (Nominal) 75mW (Peak) Impedance: 32 Ohms Install note: When using this speaker with a decoder that has a 1-2 Watt, 8 Ohm amplifier; it must be wired in parallel with another 32 Ohm speaker to create a 16 Ohm load for the amplifier. More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

You haven't heard WOWSound until you've heard it through the 28 mm High-Bass 4 W WOWSpeaker. It handles an unprecedented 4 watts and uses a bass-reflex chamber to pack a big low-end punch — the new standard for sound in larger HO, O, and G-scale models. Pair it with a sound decoder from our DCC Decoders collection, browse more DCC Accessories, or shop the full Train Control Systems lineup. Features Handles a big 4 W of power with a bass-reflex chamber for deep, room-filling sound. 28 mm (1.1") round driver — ideal for larger HO, O, and G-scale installs. 8 Ω WOWSpeaker — works with TCS WOWSound and most other-brand DCC sound decoders. Works with any scale that has room to mount it. More Information Brand Train Control Systems (TCS) Item Number 1694 Type WOWSpeaker (DCC sound speaker) Size 28 mm (1.1") round Power 4 W Impedance 8 Ω Condition New FAQ What decoders does this work with?It's an 8 Ω speaker that works with TCS WOWSound decoders and virtually any other DCC sound decoder rated for an 8-ohm load. Do I need an enclosure or baffle?Yes. Speakers need a sealed enclosure or baffle (or a sealed cavity in the shell) to move air and produce full sound — mounting it in open air will sound thin. What scales can use it?Any scale with enough room to mount it. Smaller drivers suit N and HO; larger round and high-bass speakers shine in HO, O, and G.

Read more less

The SoundTraxx 810130 is the 27mm Round Mega Bass Speaker 8-ohm 2 watt. This speaker is great for boosting the low frequencies in most diesel and “big” steam sounds. Specifications Item Number: SoundTraxx 810130 Dimensions: 27 x 14.3mm(D) Frequency Response: 350Hz – 20kHz Power: 2 Watts Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The Digitrax SP26158B is a 26.5 x 15.5 x 9mm 8 ohm speaker that arrives already mounted in its own sealed enclosure - the part most installers end up fabricating by hand. That box is what turns a thin, tinny cone into a locomotive that actually sounds like one, and at 9mm deep the whole assembly still slides into HO hoods, tenders and O scale frames. Looking for more DCC sound gear? Browse our DCC Speakers, DCC Decoders, and DCC Accessories. Features Sealed enclosure included. No scratch-building a baffle from styrene - the speaker ships in a purpose-made box that stops the rear wave cancelling the front wave. 26.5 x 15.5 x 9mm footprint fits HO diesel hoods, steam tenders and O scale frames where a 28mm round speaker will not clear. 8 ohm, 1/2 watt - matches the speaker output on most DCC sound decoders. Bare interface wires for soldering straight to the decoder speaker pads. For the same speaker with a 2-pin plug, see the Digitrax SP26158BC. Rectangular box shape sits flat against a shell wall or floor, which is usually easier to pack than a round cone plus baffle. More Information Brand Digitrax Item Number SP26158B Product Type DCC Sound Decoder Speaker with Enclosure Speaker Shape Rectangular box Dimensions 26.5 mm x 15.5 mm x 9 mm Impedance 8 Ohm Power 1/2 Watt Enclosure Included, sealed Connection Bare interface wires (no plug) Recommended Scale HO, O, G Condition New FAQ What is the difference between the SP26158B and the SP26158BC?They are the same speaker and enclosure. The SP26158B has bare interface wires that you solder to the decoder. The SP26158BC ends in a 2-pin plug for decoders and motherboards that take a plug-in speaker. Do I still need to build a baffle?No. That is the point of this version - the enclosure is already there and sealed. Just mount it somewhere it is not blocked and keep the opening clear of the shell. Will it work with my sound decoder?Any DCC sound decoder rated for an 8 ohm speaker output, Digitrax or otherwise. If your decoder manual specifies 32 ohms, use a 32 ohm speaker such as the Digitrax SP531832B instead. How much room do I need?Just over an inch long, roughly 5/8 in. wide and 3/8 in. deep. That fits most HO diesel long hoods and tenders. For N scale, use the 13mm SP13138 or the oval SP10188.

Read more less

The SoundTraxx 810162 is the Mini Cube 3 Oval Speaker/Baffle Kit. This speaker is the Mini Cube 3. We just love the amazing sound that you can get out of this tiny speaker. The Mini Cube 3 is only 12 x 5.5 x 3mm, but the sound it produces will blow your mind! George has shown this speaker off in YouTube videos with the N-Scale TSU-KN1 decoder. Specifications Item Number: SoundTraxx 810162 Dimensions: 12.5 x 5.5 x 3mm(D) Frequency Response: 800Hz - 20kHz Power: 0.3 Watts (Nominal) 0.5 Watts (Peak) Impedance: 8 Ohms Install note: For best performance, seal the speaker to the baffle with a light RTV-style adhesive. To avoid damaging the 0.5 watt Mini Cube 3 speaker, they are best used in pairs and wired in series. More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810131 is the 28mm Square Mega Bass Speaker 8-ohm 4 watt. This is SoundTraxx’s largest Megabass speaker which provides the best low frequency bass sounds for your steam, diesel, and electric models. Specifications Item Number: SoundTraxx 810131 Dimensions: 28 x 28 x 11.2mm(D) Frequency Response: 200Hz – 20kHz Power: 4 Watts Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810053 is the 20mm (3/4″) Round Speaker. This tiny, high-output speaker is suitable for N-scale and larger models. Specifications Item Number: SoundTraxx 810053 Dimensions: 20 x 3.2mm(D) Frequency Response: 475Hz – 9kHz Power: 1 Watt Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

This 25 x 14 mm oval WOWSpeaker is a tough little beast: it accepts 2 watts of audio while staying clear and accurate, and its military-spec build is dust-proof and IPX5 water-resistant. Small enough for most steam tenders and dedicated diesel installs. Pair it with a sound decoder from our DCC Decoders collection, browse more DCC Accessories, or shop the full Train Control Systems lineup. Features Accepts 2 W while staying clear and accurate. Military-spec build — dust-proof and IPX5 water-resistant. 25 x 14 mm oval footprint fits most steam tenders and diesel installs. 8 Ω WOWSpeaker — works with TCS WOWSound and most other-brand DCC sound decoders. Works with any scale that has room to mount it. More Information Brand Train Control Systems (TCS) Item Number 1697 Type WOWSpeaker (DCC sound speaker) Size 25 x 14 mm oval Power 2 W Impedance 8 Ω Condition New FAQ What decoders does this work with?It's an 8 Ω speaker that works with TCS WOWSound decoders and virtually any other DCC sound decoder rated for an 8-ohm load. Do I need an enclosure or baffle?Yes. Speakers need a sealed enclosure or baffle (or a sealed cavity in the shell) to move air and produce full sound — mounting it in open air will sound thin. What scales can use it?Any scale with enough room to mount it. Smaller drivers suit N and HO; larger round and high-bass speakers shine in HO, O, and G.

Read more less

The SoundTraxx 810089 is the 15mm (1/2") Round Speaker. This tiny speaker has a high-output and works well for N-scale and larger models. Specifications Item Number: SoundTraxx 810089 Dimensions: 15 x 3.5mm(D) Frequency Response: 780Hz - 15kHz Power: 0.3 Watt (Nominal) 0.5 Watt (Peak) Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The 32 mm (1.26") round, 5.1 mm deep WOWSpeaker produces the clarity and volume of a much larger driver, making it ideal for tight installations that still demand BIG sound. Pair it with a sound decoder from our DCC Decoders collection, browse more DCC Accessories, or shop the full Train Control Systems lineup. Features 32 mm (1.26") round, 5.1 mm deep driver delivers big, clear sound from a compact footprint. Great for tight HO and N installs that still need real volume. 8 Ω WOWSpeaker — works with TCS WOWSound and most other-brand DCC sound decoders. Works with any scale that has room to mount it. More Information Brand Train Control Systems (TCS) Item Number 1695 Type WOWSpeaker (DCC sound speaker) Size 32 mm (1.26") round, 5.1 mm deep Impedance 8 Ω Condition New FAQ What decoders does this work with?It's an 8 Ω speaker that works with TCS WOWSound decoders and virtually any other DCC sound decoder rated for an 8-ohm load. Do I need an enclosure or baffle?Yes. Speakers need a sealed enclosure or baffle (or a sealed cavity in the shell) to move air and produce full sound — mounting it in open air will sound thin. What scales can use it?Any scale with enough room to mount it. Smaller drivers suit N and HO; larger round and high-bass speakers shine in HO, O, and G.

Read more less

The TCS UNIV-SH6-C is a ready-to-use universal WOWSpeaker enclosure with the 13.6mm x 9.6mm speaker included. Micro speakers need an enclosure or a sealed shell cavity to actually produce sound — this closed-back housing channels both the front and rear audio out the front, so you get clear, full WOWSound the moment you install it. Pair it with a sound decoder from our DCC Decoders collection, browse more DCC Accessories, or shop the full Train Control Systems lineup. Features Universal WOWSpeaker enclosure with the 13.6mm x 9.6mm speaker included — no separate baffle to build. Closed-back design channels front and rear audio out the front for clear, full-bodied sound. Ready to drop into your locomotive and wire to any WOWSound or other-brand sound decoder. 8 Ω WOWSpeaker — works with TCS WOWSound and most other-brand DCC sound decoders. Works with any scale that has room to mount it. More Information Brand Train Control Systems (TCS) Item Number 1713 Type WOWSpeaker Enclosure (speaker included) Size 13.6mm x 9.6mm speaker Impedance 8 Ω Condition New FAQ What decoders does this work with?It's an 8 Ω speaker that works with TCS WOWSound decoders and virtually any other DCC sound decoder rated for an 8-ohm load. Do I need to build an enclosure?No — the enclosure is included and the speaker is already mounted, so it is ready to install and wire. What scales can use it?Any scale with enough room to mount it. Smaller drivers suit N and HO; larger round and high-bass speakers shine in HO, O, and G.

Read more less