DCC Speakers

The SoundTraxx 810153 is the 28mm (1″) 8-ohm, 2 Watt Round Speaker. Suitable for many HO and larger models. Specifications Item Number: SoundTraxx 810153 Dimensions: 28 x 4.5mm(D) Frequency Response: 320 Hz – 18kHz Power: 1 Watt (Nominal) 2 Watts (Peak) Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810112 is the 25 x 14mm Oval 8-ohm Speaker. This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium. Specifications Item Number: SoundTraxx 810112 Dimensions: 25 x 14 x 5.2mm(D) Frequency Response: 300Hz – 20kHz Power: 1.5 Watts Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810129 is the 23mm Square Mega Bass Speaker 8-ohm 2 watt. This speaker is perfect for enhancing the low bass sounds that are found in most diesel decoders. It is well worth the extra effort! Specifications Item Number: SoundTraxx 810129 Dimensions: 23 x 23 x 10.2mm(D) Frequency Response: 275Hz – 20kHz Power: 2 Watts (Nominal) 4 Watts (Peak) Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810155 is the Mini Cube 2 Oval Speaker/Baffle. SoundTraxx’s tiniest speaker comes with a properly proportioned speaker enclosure and provides remarkable volume for tiny models! Specifications Item Number: SoundTraxx 810155 Dimensions: 13 x 9 x 9.4mm(D) Frequency Response: 100Hz – 10kHz Power: 40mW (Nominal) 75mW (Peak) Impedance: 32 Ohms Install note: When using this speaker with a decoder that has a 1-2 Watt, 8 Ohm amplifier; it must be wired in parallel with another 32 Ohm speaker to create a 16 Ohm load for the amplifier. More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

You haven't heard WOWSound until you've heard it through the 28 mm High-Bass 4 W WOWSpeaker. It handles an unprecedented 4 watts and uses a bass-reflex chamber to pack a big low-end punch — the new standard for sound in larger HO, O, and G-scale models. Pair it with a sound decoder from our DCC Decoders collection, browse more DCC Accessories, or shop the full Train Control Systems lineup. Features Handles a big 4 W of power with a bass-reflex chamber for deep, room-filling sound. 28 mm (1.1") round driver — ideal for larger HO, O, and G-scale installs. 8 Ω WOWSpeaker — works with TCS WOWSound and most other-brand DCC sound decoders. Works with any scale that has room to mount it. More Information Brand Train Control Systems (TCS) Item Number 1694 Type WOWSpeaker (DCC sound speaker) Size 28 mm (1.1") round Power 4 W Impedance 8 Ω Condition New FAQ What decoders does this work with?It's an 8 Ω speaker that works with TCS WOWSound decoders and virtually any other DCC sound decoder rated for an 8-ohm load. Do I need an enclosure or baffle?Yes. Speakers need a sealed enclosure or baffle (or a sealed cavity in the shell) to move air and produce full sound — mounting it in open air will sound thin. What scales can use it?Any scale with enough room to mount it. Smaller drivers suit N and HO; larger round and high-bass speakers shine in HO, O, and G.

Read more less

The SoundTraxx 810130 is the 27mm Round Mega Bass Speaker 8-ohm 2 watt. This speaker is great for boosting the low frequencies in most diesel and “big” steam sounds. Specifications Item Number: SoundTraxx 810130 Dimensions: 27 x 14.3mm(D) Frequency Response: 350Hz – 20kHz Power: 2 Watts Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The Digitrax SP26158B is a 26.5 x 15.5 x 9mm 8 ohm speaker that arrives already mounted in its own sealed enclosure - the part most installers end up fabricating by hand. That box is what turns a thin, tinny cone into a locomotive that actually sounds like one, and at 9mm deep the whole assembly still slides into HO hoods, tenders and O scale frames. Looking for more DCC sound gear? Browse our DCC Speakers, DCC Decoders, and DCC Accessories. Features Sealed enclosure included. No scratch-building a baffle from styrene - the speaker ships in a purpose-made box that stops the rear wave cancelling the front wave. 26.5 x 15.5 x 9mm footprint fits HO diesel hoods, steam tenders and O scale frames where a 28mm round speaker will not clear. 8 ohm, 1/2 watt - matches the speaker output on most DCC sound decoders. Bare interface wires for soldering straight to the decoder speaker pads. For the same speaker with a 2-pin plug, see the Digitrax SP26158BC. Rectangular box shape sits flat against a shell wall or floor, which is usually easier to pack than a round cone plus baffle. More Information Brand Digitrax Item Number SP26158B Product Type DCC Sound Decoder Speaker with Enclosure Speaker Shape Rectangular box Dimensions 26.5 mm x 15.5 mm x 9 mm Impedance 8 Ohm Power 1/2 Watt Enclosure Included, sealed Connection Bare interface wires (no plug) Recommended Scale HO, O, G Condition New FAQ What is the difference between the SP26158B and the SP26158BC?They are the same speaker and enclosure. The SP26158B has bare interface wires that you solder to the decoder. The SP26158BC ends in a 2-pin plug for decoders and motherboards that take a plug-in speaker. Do I still need to build a baffle?No. That is the point of this version - the enclosure is already there and sealed. Just mount it somewhere it is not blocked and keep the opening clear of the shell. Will it work with my sound decoder?Any DCC sound decoder rated for an 8 ohm speaker output, Digitrax or otherwise. If your decoder manual specifies 32 ohms, use a 32 ohm speaker such as the Digitrax SP531832B instead. How much room do I need?Just over an inch long, roughly 5/8 in. wide and 3/8 in. deep. That fits most HO diesel long hoods and tenders. For N scale, use the 13mm SP13138 or the oval SP10188.

Read more less

The SoundTraxx 810078 is the 40 x 28.5mm Oval Speaker. This SoundTraxx 810078 40 x 28.5mm Oval Speaker offers a great sound in a versatile size for train modelers. Its 40 x 28.5mm form factor makes it easy to fit into any model, allowing you to enjoy crisp, clear sound in your train's cab. Specifications Item Number: SoundTraxx 810078 Dimensions: 40 x 28.5 x 11.3mm(D) Frequency Response: 250Hz - 20kHz Power: 1 Watt (Nominal) 2 Watts (Peak) Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810131 is the 28mm Square Mega Bass Speaker 8-ohm 4 watt. This is SoundTraxx’s largest Megabass speaker which provides the best low frequency bass sounds for your steam, diesel, and electric models. Specifications Item Number: SoundTraxx 810131 Dimensions: 28 x 28 x 11.2mm(D) Frequency Response: 200Hz – 20kHz Power: 4 Watts Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810114 is a 30mm round mylar speaker built for DCC sound installations in HO and larger scale model trains. With its 8 ohm impedance and 1 watt peak power handling, it pairs cleanly with SoundTraxx Tsunami2, Econami, and Blunami sound decoders to deliver authentic prime mover, horn, and bell audio — and its slim 5.3mm depth fits into shells where bigger speakers simply will not go. Need a sound decoder or speaker enclosure to go with it? Browse our SoundTraxx collection and HO Track & Accessories. Features 30mm diameter round speaker — a common fit for HO scale diesel and steam locomotive shells with room to spare Just 5.3mm deep, ideal for tight installations where vertical clearance is limited 8 ohm impedance, optimized for SoundTraxx Tsunami2, Econami, and Blunami sound decoders 0.5 watt nominal / 1 watt peak power handling for full dynamic locomotive sound Frequency response of 490Hz to 10kHz covers the full range of prime mover, horn, and bell audio Compatible with HO, S, O, and G scale installations with 30mm of clearance More Information Brand SoundTraxx Item Number 810114 Product Type DCC Sound Speaker Speaker Diameter 30mm Depth 5.3mm Impedance 8 Ohms Power Rating 0.5W Nominal / 1W Peak Frequency Response 490Hz – 10kHz Compatible Scales HO, S, O, G (any with 30mm clearance) Condition New UPC 812165020218 FAQ Will this speaker work with any DCC sound decoder?It is optimized for SoundTraxx Tsunami2, Econami, and Blunami decoders, and works with any 8 ohm-compatible sound decoder including Digitrax SoundFX, ESU LokSound, and TCS WOWSound systems. Does this speaker come with an enclosure?No — the 810114 is the bare speaker only. SoundTraxx and aftermarket suppliers offer matching baffles and enclosures separately, and adding one will noticeably improve bass response and overall sound quality. What scales is this best for?The 30mm diameter is most commonly used in HO scale diesel and steam locomotive installs, but it fits any larger scale (S, O, G) installation with enough room. For tight N scale projects, look at the smaller 20mm or 13mm SoundTraxx speakers instead. How do I wire this speaker?Solder the two pads on the back of the speaker to the speaker output leads of your sound decoder. Polarity is not critical for a single-speaker install — just keep solder joints clean and do a low-volume test before final installation. More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810053 is the 20mm (3/4″) Round Speaker. This tiny, high-output speaker is suitable for N-scale and larger models. Specifications Item Number: SoundTraxx 810053 Dimensions: 20 x 3.2mm(D) Frequency Response: 475Hz – 9kHz Power: 1 Watt Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less

The SoundTraxx 810115 is the 35 x 20mm Oval Speaker. If you have more space, this speaker is great for larger models. Specifications Item Number: SoundTraxx 810115 Dimensions: 35 x 20 x 5.3mm(D) Frequency Response: 300Hz - 5kHz Power: 2 Watts Impedance: 8 Ohms More Information Browse all DCC speakers and DCC wiring, shop the full SoundTraxx range, or pick a decoder from our DCC decoders.

Read more less