CouponAd-NoMAP

The AM-1 is a module that you can install on your model train layout and control 4 turnouts (switch tracks). The AM-1 can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller. The AM-1 can also be used to control Accessory Projects. You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! You can use our RailPro Assistant Software to design custom screens for your HC-2 to control your accessories!!! Features: Control up to 4 turnouts per Module Control Snap or Motor Operated Turnouts Size: 4.60 x 3.00 x 1.18 inches     Important Note: When an AM-1 is used as an Accessory Module, the AM-1 hardware has 8 outputs that can be software controlled for 4 motor outputs or 8 sourcing outputs. It also has another 8 I/O that can be configured for 8 inputs or 8 sinking outputs. Currently there is only one software configuration available for the module (2 motor outputs, 4 sinking outputs, and 8 inputs). We expect to offer more software configurations in the future.  

Read more less

The AM-1S is a module that you can install on your model train layout to control Accessory Projects. You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! You can use our RailPro Assistant Software to design custom screens for your HC-2 to control your accessories!!! The AM-1S can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller. The AM-1S is not for use with turnouts. Please use AM-1 for turnout control. Control motors, lights, operate lights with light effects and play custom loaded sounds! Features: Size: 4.60 x 3.00 x 1.18 inches   Important Note: Important Note: The AM-1S hardware has 8 outputs that can be software controlled for 4 motor outputs or 8 sourcing outputs. It also has another 8 I/O that can be configured for 8 inputs or 8 sinking outputs. Currently there is only one software configuration available for the module (2 motor outputs, 4 sinking outputs, and 8 inputs). We expect to offer more software configurations in the future.    

Read more less

This product is specifically designed to be used with DC and/or RailPro products. It cannot be used with DCC products. The AR-1 is used to power special configurations of track such as below. Track configuration like below would cause a short circuit if connected without the use of an AR-1. Note that if you follow Rail ’A’ around you will notice that it connects to Rail ‘B’! That is just like putting a piece of metal across Rail ’A’ and Rail ‘B’ which would cause a short circuit and would cause a power supply to shut down. The solution to power special track configurations like below is to add insulation gaps and power the sections with an AR-1. The AR-1 can also be used to isolate small sections of track, limiting the impact of short circuits if derailments occur to just one area of your layout. Features: All Solid State Design Simple Connection with Only 4 Wires No Adjustments Necessary Provides Short Circuit Isolation for a Section of Track Status Indicator Light Fast and Secure Spring Clamp Connecters Fully Enclosed Circuit Board Electronics Size: 4.60 x 3.00 x 1.18 inches Our all solid state design has many advantages over relay based designs. With the relay based designs we tested you could see the locomotive jerk when it crossed the gap at slow speeds. With our AR-1 we saw no visible change in speed at all! Further, compared to relay based designs, solid state units are far less likely to fail, switch many times faster and all without that annoying relay clicking sound.      

Read more less

The CB-1 is used to divide the output of a power supply to isolate small sections of track, limiting the impact of short circuits if derailments occur to just one area of your layout. Add multiple CB-1 to isolate several sections of track. Features: All Solid State Design Simple Connection with Only 4 Wires No Adjustments Necessary Provides Short Circuit Isolation for a Section of Track Status Indicator Light Fast and Secure Spring Clamp Connecters Fully Enclosed Circuit Board Electronics Size: 4.60 x 3.00 x 1.18 inches    

Read more less

Plug this USB module into your PC (Personal Computer) to add Direct Radio to your computer so you can control and setup RailPro products like the RailPro locomotive modules!You can use a CI-1 and a PC to get started with RailPro for a lower cost! You can buy a real RailPro handheld controller at a later time.PC Requirements: Windows 10, Windows 8, Windows 7, and Vista. Product Specifications: Interface: USB-A Dimensions: 1.87 x 0.78 x 0.34 in   Download the CI-1 Software Here!  

Read more less

The HC-3-SUN with an Extra Bright Screen for use in outdoor environments and sunlight, is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features. Product Specifications: Dimensions: 6.1 x 3.4 x 1.5 in   Simply touch the screen to take control of a locomotive or accessory, adjust settings and much more!Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your HC-3 to transmit and receive information!Setting up your RailPro system is easy. When you buy new RailPro Ready products, or new RailPro modules for locomotives and accessories, simply press the “Find Product” button and the HC-3 will automatically load a picture of the product. You can take control of the product by touching the picture of the product!With a couple touches on the screen, you can link multiple locomotives together for more pulling power! With one more touch, you can unlink the locomotives. Our Direct Radio technology allows the locomotives to communicate together to ensure each locomotive pulls its share of the load.Multiple HC-3’s can be used at the same time to allow additional family and friends to enjoy your model layout! Also, multiple locomotives and other accessories can be used simultaneously for complete model layout control!The HC-3 comes complete with built in rechargeable batteries. The HC-3 is equipped with USB port to connect to a PC. You can go to Ring Engineering’s Internet site and download new pictures, sounds, and even new programs to add more functionality to your RailPro system. You do not need a computer to use the HC-3, but this can prove to be a very useful feature.

Read more less

The LM-3 is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3 is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs! The LM-3 has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3 module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive!The LM-3 is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

Read more less

The LM-3S is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3S is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-3S has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3S module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio!The LM-3S is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

Read more less

The LM-4S-G is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-4S-G is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-4S-G has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-4S-G module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio! Product Specifications: Sound Profile: Universal (all) Dimensions: 3.35 x 1.32 x 0.57 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   Package Contents: LM-4S-G Locomotive Module WH-9 9 Pin Wiring Harness Instruction Sheet The LM-4S-G is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-4S-G through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-4S-G with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-4S-G! You can also load Sounds, Light Effects and much more!Your LM-4S-G is equipped with Rail Sonic HD Sound System! This is Ring Engineering's technology that allows your LM-4S-G to produce realistic locomotive sounds!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 3.35 x 1.32 x 0.57 Inches for easy fit. Important: If you are running your trains outside be sure to buy the model HC-2-SUN handheld controller instead of the standard model HC-2. The HC-2-SUN is easily readable in sunlight.  The HC-2 screen was designed for indoor use and looks real good inside.  Outside the standard HC-2 screen can look washed out when the sun shines on it.

Read more less

A PBM can be added to a HO model train locomotive so that if the model train wheels loose connection from the track because of dirty track or other problems, the Power Backup Module will supply power to the Locomotive Module for up to many seconds to keep operating properly without sounds, lights, or even motor stopping! What is special about the RaiPro PBM is that the PBM is an active power backup not a passive one like many other power backups. Many others are basically just super capacitors that the voltage drops exponentially as soon as the power is removed. With other backups, lights continually dim and module performance is effected. Our PBM has onboard microcontroller and other electronics that will output a fixed voltage similar to a good power supply output so lights stay constant while PBM is active and locomotives perform better. Product Specifications: Connection 2-wire Dimensions: 1.27 x 0.66 x 0.32 in DCC Track Voltage: 12.6V – 16V     Approximate Run time lights only: ~18 SecondsApproximate Run time lights and sounds: ~14 SecondsApproximate Run time lights, sounds, and pulling a train:Varies greatly depending on locomotive, speed, load etc. PBM Frequently Asked Questions What is the most important aspect of a power backup module? In our opinion, the most important aspect of a PBM is its ability to power a locomotive pulling a train across dead track. Our PBM works so well that one of our locomotives pulled twelve cars across thirty inches of dead track without stopping while the lights and sounds were on! We tested some other super capacitor only power backup products that only covered a small fraction of the distance and were as large as our PBM! If the most important aspect is powering the locomotive pulling a train, why is there so many others that show or talk about the time the lights stay on? Powering a train can take many times the power then to just have light and/or sounds on because the motor can use much more power than powering the lights and/or sounds. We have seen super capacitor only designs that have real long light on time but when you try to pull a train the results were very poor. One product we tested had many seconds of light and/or sound on time but when pulling a train it died in less than 0.2 seconds! This is why we think many talk about or show light on time because it makes their products look better than they may perform when actually pulling a train. Do I have to use a PBM in all my locomotives for them to run well? NO. If your layout is powered by a RailPro power supply, you have quality locomotives, your layout is properly wired, and you do a reasonable job of keeping your track and locomotive wheels clean, you can have a good running layout without PBMs. So who does Ring Engineering sell PBMs for if some RailPro customers do not really need them? There are many RailPro customers that run on other peoples layouts (like at train clubs) and they cannot control how clean or maintained the track is. There are some RailPro customers that do clean their track regularly but just want extra insurance to be sure they get the best operation possible. Is it ok to use other companies power backup like devices with RailPro locomotive modules? No. Ring Engineering products should only be used as described in their user manuals. The LM user manuals do not say it is ok to connect super capacitors. Using our products in a way not in compliance with our user manuals will void the warranty of the Ring Engineering product and may cause serious problems. There is no public specification on how to design power backup units so there is no guarantee of compatibility. We believe that some regular super capacitor designs have been used with RailPro LM modules and damaged the RailPro modules. If you want power backup you should only use a Ring Engineering PBM with your RailPro locomotive modules. If a power backup has more Farads of super capacitors is it better? Not necessarily. The amount of capacitance (Farads) is only one factor and may not be a real good one when trying to compare one power backup to another. There are other important features to consider besides capacitance. For example a one Farad device can be a lot better than a two farad device. The two farad device may allow lights to run longer but not be able to power a moving train well. There is simply a lot more to it then simply comparing how much capacitance a backup device has built into it. Made In USA

Read more less