Coupons

These flat cars have been specially modified to carry concrete railroad ties in Maintenance of Way trains for Amtrak. The car has a unique on-deck rail system to allow a gantry crane to traverse the cars to unload ties trackside. Founded in 1971, Amtrak is the largest North American passenger rail network serving more than 500 destinations in 46 states across 600 miles of track. More Information Item # 993 02 234 Brand Micro Trains Line Scale N Type 50' Straight-Side Flatcar w/Concrete Tie Load Kit 3-Pack Road Name Amtrak Road Numbers 15559, 15514, 15528 Release Date January 2024 MSRP 114.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

These single-door boxcars with Roller Bearing trucks were used in general service by CSX. CSX was formed through the 1986 mergers of Chessie System and Seaboard System/ Family Lines, and continues to operate today across more than 21,000 miles of track in the Eastern United States. More Information Item # 993 00 220 Brand Micro Trains Line Scale N Type 50' Boxcar with 10' Door, No Roofwalk Road Name CSX Road Numbers 143237, 143247, 143225, 143212 Release Date February 2024 MSRP 119.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

These flat cars have been specially modified to carry concrete railroad ties in Maintenance of Way trains for Amtrak. The car has a unique on-deck rail system to allow a gantry crane to traverse the cars to unload ties trackside. Founded in 1971, Amtrak is the largest North American passenger rail network serving more than 500 destinations in 46 states across 600 miles of track. More Information Item # 064 00 500 Brand Micro Trains Line Scale N Type Concrete Tie Rolling Gantry Flatcar Road Name Amtrak Road Numbers 15552 Release Date February 2024 MSRP 39.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This PS-2 hopper, with Bettendorf trucks, was built in 1957 in a series of 500 cars for the Baltimore & Ohio. The Pullman-Standard all-welded steel, 2,003 cubic-foot two bay covered hopper would become one of the most popular cars of its type with railroads and private industry. It was designed to haul everything from powdered chemicals, to grains, to construction materials such as sand or cement. Versatile and durable, this car continued in revenue service into the early 2000’s, and was sometimes found later in MOW service. More Information Item # 095 00 091 Brand Micro Trains Line Scale N Type PS-2 2-Bay Covered Hopper Road Name Chessie System B&O Road Numbers 631517 Release Date February 2024 MSRP 47.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

Three-bay covered hoppers are designed to carry everything from grain, to plastic pellets, to dry chemicals depending on the needs of the lessee. This ACF-owned covered hopper with Barber Roller Bearing Trucks was leased by Utah-Idaho Sugar Company (also called U and I Sugar), a large sugar beet processing organization originally owned and operated by a large U.S.-based church.  The company was sold off in the 1980s and renamed AgraWest. Today, it is focused primarily on Brazilian sugar production. More Information Item # 093 00 200 Brand Micro Trains Line Scale N Type ACF 3-Bay Center Flow Covered Hopper w/Round Hatches Road Name Utah-Idaho Sugar Company Road Numbers 47900 Release Date February 2024 MSRP 33.90 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This Wood Sheathed Caboose with Bettendorf trucks was built around 1910 and operated in general freight trains through the 1960s. The Spokane, Portland and Seattle was a railroad in Washington and Oregon incorporated in 1905 as a joint venture between Great Northern and Northern Pacific. It operated until 1970, when it was rolled into Burlington Northern. More Information Item # 051 00 061 Brand Micro Trains Line Scale N Type 34' Wood-Sheathed Caboose with Straight Cupola Road Name Spokane, Portland & Seattle Road Numbers 725 Release Date February 2024 MSRP 34.90 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This ice reefer with Bettendorf trucks was leased to the Kansas Egg & Poultry Company (the “Sunflower Brand”) of Hillsboro, Kansas. North American Despatch was founded in the early 1900s and was headquartered in Chicago, Illinois, primarily leasing tank cars and refrigerator cars. More Information Item # 058 00 602 Brand Micro Trains Line Scale N Type 36' Wood-Sheathed Ice Reefer Road Name Kansas Egg & Poultry Co. Road Numbers 3520 Release Date February 2024 MSRP 29.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This general purpose 50’ boxcar with Barber Roller Bearing trucks was built for the original, unrelated Norfolk Southern Railway that operated until 1982. It eventually made its way to the modern Norfolk Southern, coincidentally founded in the same year following a merger between Norfolk & Western and Southern Railways. More Information Item # 025 44 286 Brand Micro Trains Line Scale N Type 50' Rib-Side Single-Door Boxcar No Roofwalk Road Name Original Norfolk Southern Road Numbers 406818 Release Date February 2024 MSRP 32.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This 40’ boxcar with Bettendorf trucks was built in 1966 and was class Bx-115. It was primarily used to haul grain. Founded in 1859, Santa Fe was one of the largest railroads in North America up until 1996, when it merged with Burlington Northern to form BNSF. More Information Item # 074 00 190 Brand Micro Trains Line Scale N Type 40' Plug-Door Boxcar No Roofwalk Road Name Santa Fe Road Numbers 22222 Release Date February 2024 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This ready-to-run N Scale 40' Single-Door Boxcar from Micro-Trains features an injection-molded styrene body, a die cast underframe, free-rolling Delrin(R) trucks with contoured axles and truck-mounted Magne-Matic(R) magnetic knuckle couplers. Other features include detailed separate fine-profile foot stirrups and a thin-profile roofwalk. Patterned after cars built from the 1940s into the 1960s, this 40' Single-Door Boxcars is an ideal addition to late steam and 1980s or earlier diesel-era freight consist.  More Information Item # 020 00 387 Brand Micro Trains Line Scale N Type 40' Single-Door Boxcar Road Name Seaboard Air Line Road Numbers 25303 Release Date February 2024 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Ge- rade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the "k83" or "k84" modes at lightning speed, regardless of how they are configured. Feedback Since the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal "partner", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly! Set The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A"Programming" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51840 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Gerade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for incandescent lamp simulation). Set The SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51831 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less