Coupons

Peel 'n' Place™ Tufts allow you to model a variety of grassy plants often found in fields, meadows and pastures. As an extension of the Field System™, these Tufts are ready-made and can be used right out of the package. Simply peel the Tufts from the tray and place them where desired. Line Medium Green Edging Strips around buildings or along fences where it can be difficult to cut the grass. Approximate Size: 3/8" W x 1/2" H x 6 7/8" L

Read more less

Brand: JT's Mega Steam Scent: X-Mas Berry Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

“Honest Joe’s” is more than a structure, it’s a complete scene.  With the resin cast dilapidated brick sidewall, and the ageing lean-to, the remnant of of past neighboring structure introduces a story line to this scene. Whether in a run-down section of a city block, or just left to stand at the end of a street, this kit actually invites even more detail to it… so grab all of the stuff you already have and don’t know what to do with, and toss it into the abandoned side yard. Dimensions: 4.75 x 5

Read more less

MTO TRAIN-09 LI-ION Battery 14.8V / 3.0Ah Great for "dead rail" model railroad installations in locomotive (may work in some HO scale applications, G-scale or LGB) or trailing power cars.   Approximate Dimensions: 1.47" x 1.65 x 2.67"Weight: .45lbConnector: 20AWG JST SMMax Continuous Discharge: 6AOverdischarge protection: YesOvercharge protection: YesRecommended Charge Current: 1AShort Circuit Protection: YesPlease fully charge battery prior to storage. Batteries should be charged every 3 months during periods of storage.

Read more less

A PBM can be added to a HO model train locomotive so that if the model train wheels loose connection from the track because of dirty track or other problems, the Power Backup Module will supply power to the Locomotive Module for up to many seconds to keep operating properly without sounds, lights, or even motor stopping! What is special about the RaiPro PBM is that the PBM is an active power backup not a passive one like many other power backups. Many others are basically just super capacitors that the voltage drops exponentially as soon as the power is removed. With other backups, lights continually dim and module performance is effected. Our PBM has onboard microcontroller and other electronics that will output a fixed voltage similar to a good power supply output so lights stay constant while PBM is active and locomotives perform better. Product Specifications: Connection 2-wire Dimensions: 1.27 x 0.66 x 0.32 in DCC Track Voltage: 12.6V – 16V     Approximate Run time lights only: ~18 SecondsApproximate Run time lights and sounds: ~14 SecondsApproximate Run time lights, sounds, and pulling a train:Varies greatly depending on locomotive, speed, load etc. PBM Frequently Asked Questions What is the most important aspect of a power backup module? In our opinion, the most important aspect of a PBM is its ability to power a locomotive pulling a train across dead track. Our PBM works so well that one of our locomotives pulled twelve cars across thirty inches of dead track without stopping while the lights and sounds were on! We tested some other super capacitor only power backup products that only covered a small fraction of the distance and were as large as our PBM! If the most important aspect is powering the locomotive pulling a train, why is there so many others that show or talk about the time the lights stay on? Powering a train can take many times the power then to just have light and/or sounds on because the motor can use much more power than powering the lights and/or sounds. We have seen super capacitor only designs that have real long light on time but when you try to pull a train the results were very poor. One product we tested had many seconds of light and/or sound on time but when pulling a train it died in less than 0.2 seconds! This is why we think many talk about or show light on time because it makes their products look better than they may perform when actually pulling a train. Do I have to use a PBM in all my locomotives for them to run well? NO. If your layout is powered by a RailPro power supply, you have quality locomotives, your layout is properly wired, and you do a reasonable job of keeping your track and locomotive wheels clean, you can have a good running layout without PBMs. So who does Ring Engineering sell PBMs for if some RailPro customers do not really need them? There are many RailPro customers that run on other peoples layouts (like at train clubs) and they cannot control how clean or maintained the track is. There are some RailPro customers that do clean their track regularly but just want extra insurance to be sure they get the best operation possible. Is it ok to use other companies power backup like devices with RailPro locomotive modules? No. Ring Engineering products should only be used as described in their user manuals. The LM user manuals do not say it is ok to connect super capacitors. Using our products in a way not in compliance with our user manuals will void the warranty of the Ring Engineering product and may cause serious problems. There is no public specification on how to design power backup units so there is no guarantee of compatibility. We believe that some regular super capacitor designs have been used with RailPro LM modules and damaged the RailPro modules. If you want power backup you should only use a Ring Engineering PBM with your RailPro locomotive modules. If a power backup has more Farads of super capacitors is it better? Not necessarily. The amount of capacitance (Farads) is only one factor and may not be a real good one when trying to compare one power backup to another. There are other important features to consider besides capacitance. For example a one Farad device can be a lot better than a two farad device. The two farad device may allow lights to run longer but not be able to power a moving train well. There is simply a lot more to it then simply comparing how much capacitance a backup device has built into it. Made In USA

Read more less

Universal speaker housing for the TCS 13.6mm x 9.6mm speaker (included). This simple, closed design channels both the front and rear audio out the front of the speaker housing. These micro speakers do not work without being mounted to an enclosure (like this one) or to a piece of the locomotive shell. Specs Dimensions: 0.61" x 0.39" x 0.26" or 15.6mm x 10mm x 6.6mm Power Rating: 0.8W DC Impedance: 8 Ohms Includes 1x UNIV-SH6-C Speaker Surround1x 13.6mm x 9.6mm WOWSpeaker

Read more less

This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and wiring. These decoders are commonly used for smoke coils.Note: FL-series decoders do not provide motor control. A separate decoder must be used for motor function.  Function Only: This decoder only has function control for lighting, and does not provide sound or motor control.  DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.  Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.  Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.  Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects!   Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.   Decoder Lock: Feature which prevents accidental/unwanted programming while activated.  Airwire™ Compatible: Fully compatible with Airwire™ operation. Dimensions: 0.83" x 0.466" x 0.161" or 21.07mm x 11.84mm x 4.08mm Interface Type: Direct-Plug (6-pin JST) Scale: O Scale, HO Scale, G Scale, N Scale Total Functions: 2 Function Rating: 200 mA 12V Outputs: 2

Read more less

Code 83 HO Scale Nickel Silver Rail 22″ Radius Curve Snap-Track pieces in bulk (no packaging). Pricing is per single piece.

Read more less

Maximize the performance of your HO scale model railway with the Digitrax DH187A0 Series 7 Mobile Decoder. With its advanced programming features and 7 functions, this decoder offers smooth and precise control for your locomotives. Upgrade your layout and experience the power of Digitrax technology. Fits Kato, Athearn Genesis, Stewart, other HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output More Information Item # DH187A0 Brand Digitrax Scale HO MSRP $32.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

Small town or big city, the Cornerstone(R) Vintage Bowling Alley adds realistic detail to any busy HO street scene! This classic structure kit comes complete with large building-mounted "BOWLING," pins and ball, plus nonworking roadside sign and full-color printed graphics. Other features include: Fits 1950s to the present Perfect addition to city out lot or as a freestanding small town business 3-D "Bowling," pins & ball, plus freestanding street sign (nonworking) Printed interior and marquee signs included Authentic cinder block and decorative brick wall details Separate large pane windows and traditional "glass" entry/exit doors Roof-mounted air conditioners and large vents Separate electrical box, gas meter and downspouts Detailed base with sidewalks Molded in five colors and clear plastic Measures: Main Building - 12-3/8 x 7-7/16 x 3" 31.4 x 18.8 x 7.6cm Street Sign - 2-1/4 x 1-3/16 x 5-3/16" 5.7 x 3 x 13.1cm Molded in five colors and clear plastic Finish your scene with Cornerstone (933-3544 Asphalt or 933-3540 Concrete) or SceneMaster(TM) (949-1260) Parking Lots each sold separately  More Information Item # 933-4118 Brand Walthers Cornerstone Scale HO Type Building Kit MSRP $64.98

Read more less

Upgrade your model trains with the Digitrax SDXH167D series 7 sound decoder for HO Scale. Expertly designed with advanced technology, this decoder delivers clear and realistic sound effects for an immersive experience. Enjoy precise control and enhanced functionality with this top-notch decoder. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker 300uF Capacitor More Information Item # SDXH167D Brand Digitrax Scale HO Scale MSRP $59.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet

Read more less

These flat cars have been specially modified to carry concrete railroad ties in Maintenance of Way trains for Amtrak. The car has a unique on-deck rail system to allow a gantry crane to traverse the cars to unload ties trackside. Founded in 1971, Amtrak is the largest North American passenger rail network serving more than 500 destinations in 46 states across 600 miles of track. More Information Item # 983 02 234 Brand Micro Trains Line Scale N Type 50' Straight-Side Flatcar w/Concrete Tie Load Kit 3-Pack Road Name Amtrak Road Numbers 15559, 15514, 15528 Release Date January 2024 MSRP 126.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less