In Stock

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. 57.7 in3 (945 cm3)

Read more less

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. 57.7 in3 (945 cm3)

Read more less

Mix and blend versatile and compatible products to realistically recreate natural color variances, contrasts and highlights. Easy-to-use products give modelers the results they expect. 57.7 in3 (945 cm3)

Read more less

Carry your load with ease!  If you're looking for a way to make your HO scale train layout look more realistic, then you need the Bar Mills 782 Twin Baggage Cart Kits. These two baggage carts are perfect for adding some extra realism to your layout, and they're easy to assemble too. With their intricate detailing, these kits are sure to take your layout to the next level. Order yours today and see the difference for yourself!  This kit includes parts to build two HO scale baggage carts All of the detail parts are included in the kit, such as separate wheels These baggage carts would have been used in passenger stations to transport luggage between trains and the lobby area These are HO scale baggage cart kits from Bar Mills

Read more less

#701 HO Scale Coupler Assembly Fixture for #4, 5, 9 & 58 Couplers A handy tool for assisting in the assembly of your Kadee® #4, NO.5® , 9 , & 58 HO Couplers. Clamps coupler in the draft gear box, allowing easy insertion of centering spring and attachment of lid.

Read more less

#308 Under-the-Track Hidden Delayed-Action Magnetic® Uncoupler - HO, S, On3, On30, O Scale HO, S, On3, On30, O-Scale Uncoupler Under-the-Track Under-the-Track "hidden" installation. A permanent magnet and steel intensifier plate are included along with instructions. Suitable for a variety of scales from HO to O-Scale. Track not included O-SCALE:Because of the thicker ties and higher rail in O-scale it will be necessary to use 2 or 3 magnets stacked together and one steel intensifier plate on the bottom of the stack. On some track you may need to trim the bottom of the ties to fit the magnet(s) closer to the rails. Package Includes: (1) each #308 Delayed Action Magne-Matic® Uncoupler Magnet (1) each Steel Intensifier Plate #308 Dimensions: MagnetDimensions  -  2"L x 1 1/2"W x 3/16"H Intensifier Plate  -  .045" thick

Read more less

#522 - 36" Diameter Smooth Back Wheelsets (Code 110) - HO Scale Smooth wheelsets are most commonly found on diesel era rolling stock. Kadee® wheel sets are manufactured to the most exacting standards and feature: RP-25 contour, non-magnetic metal wheels and insulated needlepoint axles. Twelve Sets (1 Set = 1 Axle) Axle Tip to Tip: 1.018" Wheelset Features: Code 110 (.110") 36" Smooth Back Wheels Accurate markings Incredible detail true to prototype Non-magnetic Metal Wheels Smooth tracking Free rolling Contoured Insulated Axles RP-25 Free rolling wheels Needlepoint Axles Axle Tip to Tip: 1.018" Freight & Passenger Package Includes: (12) Sets #522 36" Diameter Smooth Back Wheelsets (Code 110)   The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

#262 HO Scale Whisker® Coupler Narrow Snap-Together Gearboxes & Lids Narrow Low Profile Snap-together Gearbox for Whisker® Couplers.(except #143, #144, #145 Short Standard Head Whisker® Couplers.) 2-56 screws are the most commonly used for center hole.Screw length will very depending on the mounting situation. 10 pair per package

Read more less

#232 HO Scale Plastic Gearboxes & Lids - #5 Style Plastic Draft Gearboxes & Lids included with NO.5, 58, 20-Series (medium & long shank), Couplers. Also works with medium & long shank Whisker® Couplers.10 pair per package 2-56 screws are the most commonly used for center hole. 0-48 or 0-80 screws are used for side holes. Screw length will very depending on the mounting situation.

Read more less

This industry leading coupler features an all metal coupler head, shank, and Whisker® centering spring and comes complete with insulated draft gearbox and lid. The #145 Magne-Matic® Whisker® Metal Coupler may be mounted with the included #242 Snap-Together Gearbox or with other manufacturers cast-on coupler pockets. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox or insulated #25 coupler. HO-Scale Package Includes: (2) Pair #145 Whisker® Metal Couplers - Short Overset Shank (2) Pair #242 Snap-Together Gearboxes (2) #622 Knuckle Springs #145 Whisker® Metal Coupler Features: Material  -   Metal Shank Length  -   Short (1/4") (center hole to back of coupler head) Coupler Offset  -   Overset Knuckle Spring  -   #622 Centering System  -   Whisker® Head  -   Standard Head Works In Place of  -   #25, #35 (#145 in a #252 box), Short Overset "clone" couplers Works With  -   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43)

Read more less

This industry leading coupler features an all metal standard coupler, and #634 standard centering spring and comes complete with an insulated draft gearbox and lid. The #58 Magne-Matic® "Scale" Metal Coupler may be mounted with the included #232 Gearbox or with other manufacturers cast-on coupler pockets. The 158 "Scale" Whisker® Coupler is equivalent to the #58 "Scale" Metal Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox. HO-Scale Package Includes: (2) Pair #58 "Scale" Metal Couplers - Medium Centerset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair #232 Gearboxes (2) #625 Knuckle Springs #58 Metal Coupler Features: Material  -   Metal Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #625 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   "Scale" Head Works In Place of  -   NO.5®, #28, #118, #119, #148, #158, most medium centerset "clone" couplers Works With  -   #213, #232, #234, #242, most manufacturer cast-on draft gearboxes #232 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Works With  -   NO.5®, #58, 20-Series and all Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick #246 Tap (2-56) and Drills (#50 and #43) #780 Tap (0-80) and Drills (#55 and #52)

Read more less

Truck Talgo Mount Coupler for Early Tyco Metal Trucks & Craftsman KitsMetal Coupler with insulated Draft Gear Box and Lid, bronze Centering Spring and side and smaller center screw mounting hole used for truck mounting situations, similar to NO.5® Coupler. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. HO-Scale Package Includes: (2) Pair NO.5® Metal Couplers - Medium Centerset Shank (2) Pair #634 Centering Spring NO.5® Style (2) Pair #9 draft Gearboxes (2) #622 Knuckle Springs NO.5® Metal Coupler Features: Material  -   Metal Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Centerset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #634 Centering Spring NO.5® Style Head  -   Standard Head #9 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   29/64"L x 19/64"W x 7/64"H Mounting Specifications: Mounting Height -top of gearbox  -   29/64" Mounting Height -bottom of gearbox  -   21/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -  0-48 Self-Tapping are the most commonly used. (Screw length will vary) Side Holes  -   0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary) Recommended Tools: #206 Insulated Muti-Purpose Coupler Height Gauge #231 Greas-em Dry Graphite Lubricant #237 Coupler Trip Pin Pliers #240 Double Headed Pin Vise #241 Dual Tool Manual Uncoupling Tool and Spring Pick

Read more less