HO Scale

By the 1920s the Northern Pacific Railroad needed bigger passenger locomotives. With the help of the American Locomotive Company's design engineers, NP designed a new locomotive with a massive firebox that had a 115 square foot grate area supported by a four wheel trailing truck. It was the first locomotive with a 4-8-4 wheel arrangement. ALCO delivered the first of 12 of these new locomotives in December of 1926, with the balance arriving early in 1927. Designated Class A, and assigned road numbers 2600 through 2611, they had 73" drivers, 28 x 30" cylinders, a boiler pressure of 210 psi, a tractive effort of 57,500 lbs and weighed 426,000 pounds. Later, the boiler pressure was raised to 240 psi which increased the tractive effort to 65,700 pounds. These were the first of this new wheel arrangement and thus were to be the namesake, with the name Northern Pacific selected which was very quickly shortened to just Northern.  Ten Class A-2s (road numbers 2650 through 2659) came from the Baldwin Locomotive Works in 1934. These heavy Northerns had 77" drivers, 28 x 31" cylinders, a boiler pressure of 260 psi, a tractive effort of 69,800 lbs and a weight of 489,400 pounds. In 1938, The Northern Pacific took delivery of eight Class A-3s (road numbers 2660 through 2667), and at the sample time three more were delivered to the SP&S.   The specifications for these locomotives were identical to the Class A-2 except that each weighed 2,400 pounds more. The SP&S locomotives were designated Class E-1.   They were mostly identical to the Northern Pacific A-3's, except all three were oil burners.   The eight Class A-4s (road numbers 2670 through 2677) were delivered by Baldwin in 1941, and had the same basic specifications as the A-3s, but were different in appearance, with 14 wheel centipede tenders and vestibule cabs, and they were 1000 pounds heavier. The last of the 4-8-4s purchased by the NP were the Class A-5s, which were built by Baldwin in 1943. This group of 10 (road numbers 2680 through 2689) were built to the same specifications as the Class A-4s, but turned out to be 16,200 lbs heavier. They were among the heaviest of all the Northern type locomotives ever built, at 508,500 pounds only the Santa Fe Class 2900s weighed more. There are no surviving Northern Pacific Northerns.   Industry-Leading Features:    NP and SP&S Northern Model Information:  ALL-NEW Paragon4 Sound & Control System Synchronized Puffing Smoke with Chuff Sound Variable Puffing Smoke Intensity and timing Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation 5-Pole Can Motor with Skew Wound Armature Built-in Capacity Pack for Improved Electrical Pick-up Premium Caliber Painting with Authentic Paint Schemes Prototypical Light Operation with Golden White LED Headlight, Rear Light   Brass Locomotive and Tender Body Heavyweight Die Cast Chassis for Maximum Pulling Power Accurately Modeled with Multiple Detail Options Appropriate for Each Paint Scheme Option for Low Numberplate Beneath Headlight Option for High or Low Numberboards where Accurate Smokestack Extension Present Where Appropriate Prototypically Accurate Paint Schemes for Each Model Many Separately Applied Details Including Handrails, Grab Irons, Ladders, Piping, Whistle, and Brass Bell Equipped with Traction Tires for Increased Pulling Power Engineer and Fireman Figures Installed Will Operate on Code 70, 83, and 100 rail Recommended Minimum Radius: 18 inches Accurate Prototypical Sounds for the UP CSA-2 Challenger   Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.  Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In capacitor pack to navigate imperfect track Capacitor Pack automatically disabled on program track for full compatibility with JMRI Decoder Pro Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control. Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Whistle for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Johnson Bar Sound at Direction Change Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal - When activated, stopping triggers and stop whistle toot.  When moving forward from a stopped position, toots twice.  When moving in reverse. toots three times. Chuff sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less

By the 1920s the Northern Pacific Railroad needed bigger passenger locomotives. With the help of the American Locomotive Company's design engineers, NP designed a new locomotive with a massive firebox that had a 115 square foot grate area supported by a four wheel trailing truck. It was the first locomotive with a 4-8-4 wheel arrangement. ALCO delivered the first of 12 of these new locomotives in December of 1926, with the balance arriving early in 1927. Designated Class A, and assigned road numbers 2600 through 2611, they had 73" drivers, 28 x 30" cylinders, a boiler pressure of 210 psi, a tractive effort of 57,500 lbs and weighed 426,000 pounds. Later, the boiler pressure was raised to 240 psi which increased the tractive effort to 65,700 pounds. These were the first of this new wheel arrangement and thus were to be the namesake, with the name Northern Pacific selected which was very quickly shortened to just Northern.  Ten Class A-2s (road numbers 2650 through 2659) came from the Baldwin Locomotive Works in 1934. These heavy Northerns had 77" drivers, 28 x 31" cylinders, a boiler pressure of 260 psi, a tractive effort of 69,800 lbs and a weight of 489,400 pounds. In 1938, The Northern Pacific took delivery of eight Class A-3s (road numbers 2660 through 2667), and at the sample time three more were delivered to the SP&S.   The specifications for these locomotives were identical to the Class A-2 except that each weighed 2,400 pounds more. The SP&S locomotives were designated Class E-1.   They were mostly identical to the Northern Pacific A-3's, except all three were oil burners.   The eight Class A-4s (road numbers 2670 through 2677) were delivered by Baldwin in 1941, and had the same basic specifications as the A-3s, but were different in appearance, with 14 wheel centipede tenders and vestibule cabs, and they were 1000 pounds heavier. The last of the 4-8-4s purchased by the NP were the Class A-5s, which were built by Baldwin in 1943. This group of 10 (road numbers 2680 through 2689) were built to the same specifications as the Class A-4s, but turned out to be 16,200 lbs heavier. They were among the heaviest of all the Northern type locomotives ever built, at 508,500 pounds only the Santa Fe Class 2900s weighed more. There are no surviving Northern Pacific Northerns.   Industry-Leading Features:    NP and SP&S Northern Model Information:  ALL-NEW Paragon4 Sound & Control System Synchronized Puffing Smoke with Chuff Sound Variable Puffing Smoke Intensity and timing Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation 5-Pole Can Motor with Skew Wound Armature Built-in Capacity Pack for Improved Electrical Pick-up Premium Caliber Painting with Authentic Paint Schemes Prototypical Light Operation with Golden White LED Headlight, Rear Light   Brass Locomotive and Tender Body Heavyweight Die Cast Chassis for Maximum Pulling Power Accurately Modeled with Multiple Detail Options Appropriate for Each Paint Scheme Option for Low Numberplate Beneath Headlight Option for High or Low Numberboards where Accurate Smokestack Extension Present Where Appropriate Prototypically Accurate Paint Schemes for Each Model Many Separately Applied Details Including Handrails, Grab Irons, Ladders, Piping, Whistle, and Brass Bell Equipped with Traction Tires for Increased Pulling Power Engineer and Fireman Figures Installed Will Operate on Code 70, 83, and 100 rail Recommended Minimum Radius: 18 inches Accurate Prototypical Sounds for the UP CSA-2 Challenger   Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.  Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In capacitor pack to navigate imperfect track Capacitor Pack automatically disabled on program track for full compatibility with JMRI Decoder Pro Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control. Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Whistle for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Johnson Bar Sound at Direction Change Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal - When activated, stopping triggers and stop whistle toot.  When moving forward from a stopped position, toots twice.  When moving in reverse. toots three times. Chuff sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less

By the 1920s the Northern Pacific Railroad needed bigger passenger locomotives. With the help of the American Locomotive Company's design engineers, NP designed a new locomotive with a massive firebox that had a 115 square foot grate area supported by a four wheel trailing truck. It was the first locomotive with a 4-8-4 wheel arrangement. ALCO delivered the first of 12 of these new locomotives in December of 1926, with the balance arriving early in 1927. Designated Class A, and assigned road numbers 2600 through 2611, they had 73" drivers, 28 x 30" cylinders, a boiler pressure of 210 psi, a tractive effort of 57,500 lbs and weighed 426,000 pounds. Later, the boiler pressure was raised to 240 psi which increased the tractive effort to 65,700 pounds. These were the first of this new wheel arrangement and thus were to be the namesake, with the name Northern Pacific selected which was very quickly shortened to just Northern.  Ten Class A-2s (road numbers 2650 through 2659) came from the Baldwin Locomotive Works in 1934. These heavy Northerns had 77" drivers, 28 x 31" cylinders, a boiler pressure of 260 psi, a tractive effort of 69,800 lbs and a weight of 489,400 pounds. In 1938, The Northern Pacific took delivery of eight Class A-3s (road numbers 2660 through 2667), and at the sample time three more were delivered to the SP&S.   The specifications for these locomotives were identical to the Class A-2 except that each weighed 2,400 pounds more. The SP&S locomotives were designated Class E-1.   They were mostly identical to the Northern Pacific A-3's, except all three were oil burners.   The eight Class A-4s (road numbers 2670 through 2677) were delivered by Baldwin in 1941, and had the same basic specifications as the A-3s, but were different in appearance, with 14 wheel centipede tenders and vestibule cabs, and they were 1000 pounds heavier. The last of the 4-8-4s purchased by the NP were the Class A-5s, which were built by Baldwin in 1943. This group of 10 (road numbers 2680 through 2689) were built to the same specifications as the Class A-4s, but turned out to be 16,200 lbs heavier. They were among the heaviest of all the Northern type locomotives ever built, at 508,500 pounds only the Santa Fe Class 2900s weighed more. There are no surviving Northern Pacific Northerns.   Industry-Leading Features:    NP and SP&S Northern Model Information:  ALL-NEW Paragon4 Sound & Control System Synchronized Puffing Smoke with Chuff Sound Variable Puffing Smoke Intensity and timing Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation 5-Pole Can Motor with Skew Wound Armature Built-in Capacity Pack for Improved Electrical Pick-up Premium Caliber Painting with Authentic Paint Schemes Prototypical Light Operation with Golden White LED Headlight, Rear Light   Brass Locomotive and Tender Body Heavyweight Die Cast Chassis for Maximum Pulling Power Accurately Modeled with Multiple Detail Options Appropriate for Each Paint Scheme Option for Low Numberplate Beneath Headlight Option for High or Low Numberboards where Accurate Smokestack Extension Present Where Appropriate Prototypically Accurate Paint Schemes for Each Model Many Separately Applied Details Including Handrails, Grab Irons, Ladders, Piping, Whistle, and Brass Bell Equipped with Traction Tires for Increased Pulling Power Engineer and Fireman Figures Installed Will Operate on Code 70, 83, and 100 rail Recommended Minimum Radius: 18 inches Accurate Prototypical Sounds for the UP CSA-2 Challenger   Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.  Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In capacitor pack to navigate imperfect track Capacitor Pack automatically disabled on program track for full compatibility with JMRI Decoder Pro Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control. Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Whistle for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Johnson Bar Sound at Direction Change Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal - When activated, stopping triggers and stop whistle toot.  When moving forward from a stopped position, toots twice.  When moving in reverse. toots three times. Chuff sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less

By the 1920s the Northern Pacific Railroad needed bigger passenger locomotives. With the help of the American Locomotive Company's design engineers, NP designed a new locomotive with a massive firebox that had a 115 square foot grate area supported by a four wheel trailing truck. It was the first locomotive with a 4-8-4 wheel arrangement. ALCO delivered the first of 12 of these new locomotives in December of 1926, with the balance arriving early in 1927. Designated Class A, and assigned road numbers 2600 through 2611, they had 73" drivers, 28 x 30" cylinders, a boiler pressure of 210 psi, a tractive effort of 57,500 lbs and weighed 426,000 pounds. Later, the boiler pressure was raised to 240 psi which increased the tractive effort to 65,700 pounds. These were the first of this new wheel arrangement and thus were to be the namesake, with the name Northern Pacific selected which was very quickly shortened to just Northern.  Ten Class A-2s (road numbers 2650 through 2659) came from the Baldwin Locomotive Works in 1934. These heavy Northerns had 77" drivers, 28 x 31" cylinders, a boiler pressure of 260 psi, a tractive effort of 69,800 lbs and a weight of 489,400 pounds. In 1938, The Northern Pacific took delivery of eight Class A-3s (road numbers 2660 through 2667), and at the sample time three more were delivered to the SP&S.   The specifications for these locomotives were identical to the Class A-2 except that each weighed 2,400 pounds more. The SP&S locomotives were designated Class E-1.   They were mostly identical to the Northern Pacific A-3's, except all three were oil burners.   The eight Class A-4s (road numbers 2670 through 2677) were delivered by Baldwin in 1941, and had the same basic specifications as the A-3s, but were different in appearance, with 14 wheel centipede tenders and vestibule cabs, and they were 1000 pounds heavier. The last of the 4-8-4s purchased by the NP were the Class A-5s, which were built by Baldwin in 1943. This group of 10 (road numbers 2680 through 2689) were built to the same specifications as the Class A-4s, but turned out to be 16,200 lbs heavier. They were among the heaviest of all the Northern type locomotives ever built, at 508,500 pounds only the Santa Fe Class 2900s weighed more. There are no surviving Northern Pacific Northerns.   Industry-Leading Features:    NP and SP&S Northern Model Information:  ALL-NEW Paragon4 Sound & Control System Synchronized Puffing Smoke with Chuff Sound Variable Puffing Smoke Intensity and timing Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation 5-Pole Can Motor with Skew Wound Armature Built-in Capacity Pack for Improved Electrical Pick-up Premium Caliber Painting with Authentic Paint Schemes Prototypical Light Operation with Golden White LED Headlight, Rear Light   Brass Locomotive and Tender Body Heavyweight Die Cast Chassis for Maximum Pulling Power Accurately Modeled with Multiple Detail Options Appropriate for Each Paint Scheme Option for Low Numberplate Beneath Headlight Option for High or Low Numberboards where Accurate Smokestack Extension Present Where Appropriate Prototypically Accurate Paint Schemes for Each Model Many Separately Applied Details Including Handrails, Grab Irons, Ladders, Piping, Whistle, and Brass Bell Equipped with Traction Tires for Increased Pulling Power Engineer and Fireman Figures Installed Will Operate on Code 70, 83, and 100 rail Recommended Minimum Radius: 18 inches Accurate Prototypical Sounds for the UP CSA-2 Challenger   Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.  Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In capacitor pack to navigate imperfect track Capacitor Pack automatically disabled on program track for full compatibility with JMRI Decoder Pro Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control. Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Whistle for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Johnson Bar Sound at Direction Change Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal - When activated, stopping triggers and stop whistle toot.  When moving forward from a stopped position, toots twice.  When moving in reverse. toots three times. Chuff sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less

By the 1920s the Northern Pacific Railroad needed bigger passenger locomotives. With the help of the American Locomotive Company's design engineers, NP designed a new locomotive with a massive firebox that had a 115 square foot grate area supported by a four wheel trailing truck. It was the first locomotive with a 4-8-4 wheel arrangement. ALCO delivered the first of 12 of these new locomotives in December of 1926, with the balance arriving early in 1927. Designated Class A, and assigned road numbers 2600 through 2611, they had 73" drivers, 28 x 30" cylinders, a boiler pressure of 210 psi, a tractive effort of 57,500 lbs and weighed 426,000 pounds. Later, the boiler pressure was raised to 240 psi which increased the tractive effort to 65,700 pounds. These were the first of this new wheel arrangement and thus were to be the namesake, with the name Northern Pacific selected which was very quickly shortened to just Northern.  Ten Class A-2s (road numbers 2650 through 2659) came from the Baldwin Locomotive Works in 1934. These heavy Northerns had 77" drivers, 28 x 31" cylinders, a boiler pressure of 260 psi, a tractive effort of 69,800 lbs and a weight of 489,400 pounds. In 1938, The Northern Pacific took delivery of eight Class A-3s (road numbers 2660 through 2667), and at the sample time three more were delivered to the SP&S.   The specifications for these locomotives were identical to the Class A-2 except that each weighed 2,400 pounds more. The SP&S locomotives were designated Class E-1.   They were mostly identical to the Northern Pacific A-3's, except all three were oil burners.   The eight Class A-4s (road numbers 2670 through 2677) were delivered by Baldwin in 1941, and had the same basic specifications as the A-3s, but were different in appearance, with 14 wheel centipede tenders and vestibule cabs, and they were 1000 pounds heavier. The last of the 4-8-4s purchased by the NP were the Class A-5s, which were built by Baldwin in 1943. This group of 10 (road numbers 2680 through 2689) were built to the same specifications as the Class A-4s, but turned out to be 16,200 lbs heavier. They were among the heaviest of all the Northern type locomotives ever built, at 508,500 pounds only the Santa Fe Class 2900s weighed more. There are no surviving Northern Pacific Northerns.   Industry-Leading Features:    NP and SP&S Northern Model Information:  ALL-NEW Paragon4 Sound & Control System Synchronized Puffing Smoke with Chuff Sound Variable Puffing Smoke Intensity and timing Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation 5-Pole Can Motor with Skew Wound Armature Built-in Capacity Pack for Improved Electrical Pick-up Premium Caliber Painting with Authentic Paint Schemes Prototypical Light Operation with Golden White LED Headlight, Rear Light   Brass Locomotive and Tender Body Heavyweight Die Cast Chassis for Maximum Pulling Power Accurately Modeled with Multiple Detail Options Appropriate for Each Paint Scheme Option for Low Numberplate Beneath Headlight Option for High or Low Numberboards where Accurate Smokestack Extension Present Where Appropriate Prototypically Accurate Paint Schemes for Each Model Many Separately Applied Details Including Handrails, Grab Irons, Ladders, Piping, Whistle, and Brass Bell Equipped with Traction Tires for Increased Pulling Power Engineer and Fireman Figures Installed Will Operate on Code 70, 83, and 100 rail Recommended Minimum Radius: 18 inches Accurate Prototypical Sounds for the UP CSA-2 Challenger   Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.  Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In capacitor pack to navigate imperfect track Capacitor Pack automatically disabled on program track for full compatibility with JMRI Decoder Pro Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control. Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Whistle for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Johnson Bar Sound at Direction Change Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal - When activated, stopping triggers and stop whistle toot.  When moving forward from a stopped position, toots twice.  When moving in reverse. toots three times. Chuff sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #32 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #142 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #32 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.   Two pair per package   Made in the U.S.A. HO-Scale Package Includes: (2) Pair #32 Plastic Shank Couplers - Medium Overset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #32 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Overset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #32 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   35/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #32 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary)

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #35 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #145 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #35 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.   Two pair per package   Made in the U.S.A. HO-Scale Package Includes: (2) Pair #35 Plastic Shank Couplers - Short Overset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #35 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Short (1/4") (center hole to back of coupler head) Coupler Offset  -   Overset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #35 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   35/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #35 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary)

Read more less

#454 HO Scale Swing Bracket Adaptor KitNo couplers included in kit.The #454 Swing Bracket Kit is designed to give the coupler extended swing and allows the negotiation of 18" radius "S" curves, switches and crossovers with prototypical close coupling. Swing Brackets with couplers installed on loco and car in "S" curve.One pair per package Coupler Conversion Info You must first identify the locomotive or rolling stocks manufacturer and type before looking the product up on the HO-Scale Coupler Conversions. Use the HO-Scale Coupler Conversions to lookup our suggested starting coupler* for the particular model. (Our conversions typically requiring the least modification to a model utilizing our newest couplers even though other couplers also work for the model). Once you have lookup our suggested starting coupler you can use our HO-Scale Coupler Conversions (How -To instructions and diagrams) to help you with the couplers installation process. Always check the coupler heights with either our #205 or newer #206 Coupler Height Gauge. Note: If the model came with Factory Knuckle Couplers it will not be listed on the HO-Scale Coupler Conversions under manufacturer there is a generic conversion for Factory Knuckle Couplers on the top of the HO-Scale Coupler Conversions. *Our conversion’s based on only one model from a production run, there may be inconsistencies in a model’s production run that require a different coupler or model modifications to achieve the proper coupler height for coupler function.

Read more less

This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #38 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #148 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #38 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.   Two pair per package   Made in the U.S.A. HO-Scale Package Includes: (2) Pair #38 Plastic Shank Couplers - Medium Underset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #38 Plastic Coupler Features: Material  -   Metal Knuckle, Plastic Coupler Shank Shank Length  -   Medium (9/32") (center hole to back of coupler head) Coupler Offset  -   Underset Knuckle Spring  -   #622 Centering System  -   Standard Shank Centering Spring  -   #621 Torsion Centering Spring Head  -   Standard Head Works With  -   #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material  -   Insulated Plastic Dimensions  -   3/8"L x 5/16"W x 9/64"H Works With  -   NO.5®, #58, 20-Series Couplers #38 in a #233 gearbox on top. Mounting Specifications: Mounting Height  -   1/2" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary) #38 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary)

Read more less

SurroundTraxx is a major breakthrough in sound systems for model trains! For the first time, a sound system has been designed with multiple trains in mind. SurroundTraxx gives you the realism of high-fidelity sound moving with the train as it travels about the layout, without installing speakers onboard the engine. SurroundTraxx works with a multiplicity of audio speakers that are strategically placed in hidden locations around the layout. Using the latest digital signal processing (DSP) technology and advanced block detection techniques, SurroundTraxx faithfully reproduces the sounds made by each train on the layout and directs the sound to the speaker closest to the train's location. As a train moves along its route, SurroundTraxx makes continuous adjustments to the sound level of each speaker so that the sound appears to follow the train around the layout. SurroundTraxx does not simply switch the sound from speaker to speaker. It uses an intelligent cross-fade algorithm that factors in train speed, direction, and distance between speakers. The sound makes a smooth transition as your train travels from one sound zone to the next without abrupt pops or thumps. DCC surround-sound system for your layout Suitable for all scales -- N through G! Sounds interact and “move” with your trains; no onboard speakers necessary Use with any 8-ohm speaker (or subwoofer for lower frequencies) Six sound channels support six different “sound zones” on your layout Simultaneous sound operations for up to six trains to be dispatched at once Memory storage for up to 99 locomotive profiles An extensive sound library to closely match all popular steam and diesel prototypes Ambient effects such as echo and reverb Download the data sheet (PDF) SurroundTraxx stores a roster of locomotive sound settings in a database called the Roundhouse. This is an extensive library that you can set up and adjust to match your model's prototype or to sound like your favorite horn or whistle, prime mover, or exhaust chuff. Each engine can have a unique sound profile! Once you have entered your locomotive roster into the Roundhouse, you can use the internal “dispatcher,” which allows up to six trains to be in operation at one time. SurroundTraxx can be set up to pick the first six locomotives detected, or you can assign these slots to the locomotives of your choice (perfect to make sure your favorite engine never goes silent!). These locomotive “slots” used by the dispatcher are called Auto Dispatch (AD) slots. After the trains have been dispatched, the block detector will identify the trains' locations, the speed they are traveling, and the point where they will cross into new blocks. SurroundTraxx uses this information to move the appropriate sounds to the corresponding sound channel (six are available) on the SurroundTraxx unit. SurroundTraxx uses an intelligent cross-fade algorithm that factors in train speed, direction, and distance between speakers. This reproduces the sound in such a way that it appears as though it is being emitted directly from the train rather than the speakers on the layout. The multiple trains running on the layout can all be in the same area or spread throughout the layout. SurroundTraxx will still dispatch and reproduce their respective sounds in full audio richness. It truly is a complete layout sound system with multiple trains and operating sessions in mind! Note: If using single-channel mode (default), the sound will feed through all six channels at once and does not follow the train. In order to set up the other modes of operation, you must use Digitrax® transponding block detection on your layout.  Included with SurroundTraxx: SurroundTraxx system 5V power supply Network cable Speaker harness for six sound channel outputs (6' sections of each) Quick Start Guide Owner’s Manual CD Customer registration card Additional items needed for operation: Up to six 8-ohm speakers Optional subwoofer The appropriate DCC mobile decoders equipped with transponding or a TL-1 transponder Digitrax DCC Command Station, cabs and power boosters Additional speaker wire if using a distance greater than 6’ Digitrax BDL-168 (or older BDL-162) Block Detectors Digitrax RX-4s (eight total)

Read more less

#590 Bettendorf - AAR Electrical Pickup Self Centering Caboose Trucks with 33" Smooth Back Wheels - (Leaf Spring) - HO Scale"HGC" Two Piece Fully Equalized Trucks Mounts with a #2 or 2-56 screw. "HGC" or High Gravity Compound, weighs nearly the same as Metal Trucks but with more detail & a 2 piece split bolster design for more efficient truck equalization, reduced axle friction for greater rolling performance. One Pair HO-Scale "HGC" Two Piece Fully EqualizedElectrical PickupTrucks Features:  Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) 33" Smooth Back Wheels "HGC" Weighs nearly the same as Metal Trucks Superior Rolling Ability Clip on Brake Pads Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Fully Equalized Trucks Smooth tracking Free Rolling Contoured Insulated Axles RP-25 Free Rolling Wheels Electrical Pickup Patent number 7,434,518 B2 Package Includes: (2) Each #590 Bettendorf - AAR Electrical Pickup Self Centering Caboose Truck (Leaf Spring) (assembled) (2) Clip on Brake Pads (2) Electrical Pickup w/wire (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.

Read more less

Support Panels are made of extruded foam and designed to use as a strong but lightweight terrain understructure. They are quick and easy to use. Cut easily with Hot Wire Foam Cutter, Foam Knife, scissors or hobby knife. Cover with No-News Paper™ and Plaster Cloth. Just the right width to use with Road Riser™ to make an elevated road base. 4/pkg 1/16" d x 18" w x 24" l (1.59 mm x 45.7 cm x 61 cm)

Read more less