N Scale

In 2023, we are building our third production run of USRA Heavy and Light Pacifics.   There were 20 original Heavy Pacifics built in 1919 for the USRA program, and all 20 went to Erie Railroad.  From 1923, numerous copies were built, and many railroads operated similar locomotives.  There were 81 original Light Pacifics built in 1919, and these were delivered to ACL, B&O, GTW, M&O (GM&O), and L&N.  Subsequently, each of these railroads built copies, and several other railroads operated locomotives with similar dimensions and equipment.  The Light Pacifics were limited to 54,000 lbs load per axle, versus 60,000 for the Heavy Pacifics, and this allowed the Light Pacifics to run on most main lines.  Our Heavy and Light models follow the original USRA designs closely.   Railroad specific variations are not modeled on these locomotives.  Many Pacifics used the same 10,000 gallon tender as the USRA Mikados, and our models uses this 10,000 gallon tender.  In addition to some of the prototypical USRA Pacifics, we are also decorating our USRA prototype in attractive paint schemes that similar Pacifics wore for other railroads, as well as a few striking fantasy paint schemes.  Our models are available in our Paragon4 Sound/DC/DCC Series, or in our Stealth Series as No-Sound / DCC-Ready models.        Industry-Leading Features:  Paragon4 Sound & Operation System featuring ROLLING THUNDERTM  Authentic Sounds and Prototypical Operation in both DC and DCC environments Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation Prototypical Light Operation with Golden White LED Headlight Die Cast Boiler Body with Die Cast chassis for Maximum Tractive Effort Traction Tires for Additional Tractive Effort (2) Operating MicroTrains-compatible Couplers Separately Applied Handrails, Ladders, Whistle, and Brass Bell Will Operate on Code 55, 70, and 80 Rail Recommended Minimum Radius: 9.75 inches   Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed.  Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models.    Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In extra capacitance to navigate imperfect track Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Horn for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal Prime Mover sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings

Read more less

This Kato EMD SD70ACe with Nose Headlight diesel is based on the high-horsepower road diesel locomotives used in freight service from coast to coast. Features include a nose-mounted headlight, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, fine decoration, directional LED headlights and Kato magnetic knuckle couplers. This unit comes equipped with a factory-installed TCS DCC decoder. EMD SD70ACe diesels operate from coast to coast, so this N Scale model will look right at home on your modern-era layout.

Read more less

This Kato EMD SD70ACe with Nose Headlight diesel is based on the high-horsepower road diesel locomotives used in freight service from coast to coast. Features include a nose-mounted headlight, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, a lighting control board that can be swapped for a DCC decoder when you're ready (available separately), fine decoration, directional LED headlights and Kato magnetic knuckle couplers. EMD SD70ACe diesels operate from coast to coast, so this N Scale model will look right at home on your modern-era layout.

Read more less

This Kato EMD SD70ACe with Nose Headlight diesel is based on the high-horsepower road diesel locomotives used in freight service from coast to coast. Features include a nose-mounted headlight, five-pole motor with dual flywheels, all-wheel electrical pickup, heavy die cast metal chassis, a lighting control board that can be swapped for a DCC decoder when you're ready (available separately), fine decoration, directional LED headlights and Kato magnetic knuckle couplers. EMD SD70ACe diesels operate from coast to coast, so this N Scale model will look right at home on your modern-era layout.

Read more less

Animate your models in minutes with the Walthers Cornerstone Motorizing Kit. This fully assembled drive unit is a drop-in mount for Walthers Double Track Swing Bridge (933-3088), 90' Turntable Kit (933-3171) and the Walking Beam Oil Pumps in HO (933-3170) or N Scale (933-3248), all sold separately. The Motorizing Kit can easily be adapted to other models. It's complete with a rugged DC motor and has 360:1 gearing to insure smooth, slow speeds. PLEASE NOTE: This unit is for use with DC power only; maximum 12V, .25 amps. Use with Cornerstone structures that accept motorizing 360:1 gear ratio Works on standard DC

Read more less

Discover the joy of customizing your layout with foliage! This comprehensive kit offers enough materials to create eighteen trees of varying heights, from ¾” to 8”-- a perfect way to bring life to any projects, even if you're a beginner! About Learning Kits Value-packed tools specifically developed to teach beginning modelers and other hobbyists how to use the Terrain and Landscape Systems. Learn to sculpt terrain, cast, color and install rocks, landscape various scenes, create paved areas, make trees, model water features and other scenic details. Reseal packages for easy storage. Hydrocal® is a registered trademark of U.S. Gypsum.

Read more less

Expand your HO trainset fun in minutes with the WalthersTrainline EMD GP15-1 diesel! Fully assembled and ready for service, features include: Directional headlights All-wheel drive and electrical pick-up Powerful can motor with flywheel Heavy die-cast metal frame for added pulling power Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Labelle Industries No. 107 Plastic Compatible Motor Oil 2019 formula is a medium-weight lubricant for HO and larger scale models with high-torque motors. With its temperature range of -45F to +450F it's more than suitable for model trains as well as other radio-control vehicles and drone shafts. It is also USDA Food Grade and Kosher certified and contains no chemicals that require Proposition 65 notices in California. Other uses of No. 107 Plastic Compatible Motor Oil include Other uses: fractional horsepower motors, tiny bearings, computer fans, computer printed bearings, sewing machines, large fishing reel mechanisms, drawer slides, door and window locks, precision instruments, large clock mechanisms and small locks of all sizes.

Read more less

N Scale Metal pole and arms LED lights for low current drain Ready to use with resistors attached Designed for easy mounting Clock face is illuminated 2 clocks in the package Voltage Requirements: 14 to 18 volts AC or DC

Read more less

Precision Plastic Glue from Deluxe Materials is a low odor, liquid plastic cement with pinpoint applicator. It's a hazard free, non-toxic, plastic cement with a needle applicator. The glue is designed to be easy to apply, and with a 10 second working time for positional adjustment, it's ideal for all types of styrene plastic kits. Furthermore, it is chemically engineered to resist needle clogging and not thicken in use. Precision Plastic Glue is packed in an easy to hold, clear plastic bottle for glue level visibility and an integrated detachable needle for safety.  In Pinpoint Applicator Bottle .9oz 25g

Read more less

Deluxe Materials AD55 Glue 'n' Glaze is a multi-scale polymer that forms an ultra-strong, waterproof film. It has unbeatable gap-filling capabilities and superior adhesion, making it ideal for a range of modeling tasks. Its durability, flexibility and non-toxicity make it an essential modeling tool.

Read more less

The product features a United States flag high on a flag pole. The pole is topped with a ball-style finial and includes a rope and cleat. US Flags include a Just Plug Spotlight to highlight the Flag. Spotlight is designed and ready to plug into the Just Plug Light Hub. Flag Pole measurement: 4.13" (105 mm) H Flag measurement: 1.32" W x 0.826" H (33.5 mm x 21 mm) Kit includes: 1 Medium Flag Pole with Flag 1 Small Spotlight with 36 in (91 cm) wire 1 Linker Plug

Read more less