O Scale
ESU LLC ESU 53900 | DCC Decoder Tester - Cube Speaker & LEDs | Multi Scale
Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how to do this? The Profi Decoder tester makes it easy for you: simply connect the tester to your command station or the LokProgrammer. It enables you to test any decoder without exposing it to any external factors caused by the locomotive that may influence its performance. Features In order to make things as easy as possible for you, the Profi Decoder Tester is equipped with some useful features. It has all commonly used interface sockets for connecting a decoder for the smaller scale models: Besides a 6-pole NEM 651 socket and the 8-pole NEM 652 socket, it also has an 21MTC interface as per NEM 660, a PluX22 socket as well as a Next18 interface: No matter which type of decoder you have: Simply plug it in – it will fit! And that’s all there is to it! Decoders without any interface can be contacted with individual terminals. A quality coreless motor with flywheel serves in conjunction with LEDs indicating the direction for checking the motor output: Thus it is quite easy to check on the low speed performance and the even speed of the decoder. An LED monitor informs you about the functioning of the headlights and back-up lights as well as the function outputs AUX1 through AUX6. For testing LokSound decoders we have integrated a 20 mm speaker. You may choose if the integral speaker should be switched off or if it should have 100 Ohm respectively 16 Ohm – thus the Decoder Tester is perfectly suitable for any ESU decoder generation! Two SUSI plugs facilitate the direct test of optional SUSI modules as well as the connection to another circuit board. The electrical connection to either the command station or the LokProgrammer is facilitated by a removable, 2-pole terminal block (same system as used on the LokProgrammer and the ECoS) or via two solder points. The dimensions of the ESU Decoder Tester are 99 x 74 x 34mm. WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov
$42.79
JT's Mega Steam JT's Mega Steam 101 | Coal-Fired Steamer Smoke Fluid 2 Oz. Bottle
Brand: JT's Mega Steam Scent: Coal-Fired Steamer Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA
$6.79$5.98
Woodland Scenics Woodland Scenics 5683 | Extension Wire | Multi Scale
Extension Wire is Just Plug-compatible and has soft insulation for easy stripping. Paired wire is color-coded for proper connection with Splicer Plugs and Extension Cable Kit.
$7.59
Woodland Scenics Woodland Scenics 140 | Soft Flake Snow | Multi Scale
Use this product to model winter scenery on model railroads, dioramas, military models, school displays or where collectible houses are displayed. Model a light dusting of snow, heavy drifts or create frothy rapids on a water feature. Comes in a handy see-through, reusable Canister Shaker with a sprinkle/pour dual-purpose lid. Add snow to scenery For any scale 57.7 in3 (945 cm3)
$10.49
Deluxe Materials Deluxe Materials AD74 | Ballast Magic Adhesive Powder | Multi Scale
Innovative powder adhesive. For clean, easy bonding of scatter & ballast. Instant grab, adjustable bond, reversible joints. Ballast Magic by Deluxe Materials is a new way to ballast track in all scales. The adhesive itself is a fine dry powder that is very easy to mix in with ballast. Once the adhesive and ballast mixture is laid in the track it needs to be misted with water using the Ballast Spray bottle. Using Ballast Magic is a new enjoyable way to bond ballast. Bond is reversible with warm water. Instructions: Mix thoroughly 1 part dry Ballast Magic with between 5 & 10 parts granules by volume. Apply to track or scene. Spray gently with water for instant grab & activation. Adjust if required. Allow to dry for 1-2 hours. Dries to a realistic matt effect. Fast drying 1-2 hours Good bond resistant to everyday handling Safe to use. Can be manipulated easily & mixed with most scatters Ideal for large areas, fixing coal , creating piles etc. Ballast Magic will be especially useful when ballasting around points because it can be applied in a controlled manner without the risk of adhesive flowing into the working parts of a point. Its reversible nature means that if you position something that you later think is in the wrong location you can dampen the adhesive which will then release. 125ml.
$13.19
Woodland Scenics Woodland Scenics 5647 | Just Plug Lighting System - Arched Cast Iron Street Lights | O Scale
Use to light city streets, sidewalks, downtown areas, parks, bridges and more. 20mA set Dimensions - 1.39" w x 6.252" h (35.3 mm w x 158.8 mm h) RoHS Compliant
$20.95
JT's Mega Steam JT's Mega Steam 110 | Coffee Smoke Fluid 2 Oz. Bottle
Brand: JT's Mega Steam Scent: Coffee Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA
$6.79
Woodland Scenics Woodland Scenics 650 | 7-Pak Workbench Assortment - Hob-E-Lube | Multi Scale
Precision lubricants for craftsmen! This super-saver value includes all seven lubricants plus complete instructions that spell out precise applications and the exact lubricant to use. Be prepared. Know where and when to use which lube: nonconductive, nonstaining, penetrating. About Hob-E-Lube® Lubricants Hob-E-Lube is a complete, special-purpose line of ultra-refined, quality lubricants, precision-designed for tough, close-tolerance model requirements. All Hob-E-Lube lubricants have been researched thoroughly and tested for use with trains, remote-control R/C cars, planes and boats. They are paint and plastic compatible, and have virtually limitless applications for workshop, household and hobby projects.
$30.79
Labelle Labelle 1001 | Complete Lubricant Set | HO, O, S, On30, Large Scale
Includes one each Plastic Compatible Gear Lubricant, Plastic Compatible Grease with PTFE and Plastic Compatible Motor Oil. For HO, O, S, On30, Lionel, LGB and all larger size trains. Comes with 7-1/2" extension needle adapter for those hard-to-reach places. Kit Includes: #102 Micro-Gear Lube with PTFE #106 Micro Grease Lube with PTFE #107 Micro-Oil Lube Oil (Medium weight ISO 68)
$23.19
JT's Mega Steam JT's Mega Steam 106 | Vanilla Smoke Fluid - 2 Oz. Bottle | Multi Scale
Brand: JT's Mega Steam Scent: Vanilla Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA
$6.79
JT's Mega Steam JT's Mega Steam 119 | X-Mas Berry Smoke Fluid 2 Oz. Bottle
Brand: JT's Mega Steam Scent: X-Mas Berry Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA
$6.79
ESU LLC ESU 50344 | Rectangular Speaker with Enclosure - 8 Ohm, 15/16 x 2-5/32 x 11/32" 24 x 55 x 8.6mm | Multi Scale
The LokSound by ESU Rectangular Speaker with Enclosure is ideal for use in HO, OO, S and small O Scale model locomotives. This speaker includes a built-in enclosure to enhance its output and is rated at 8 Ohms. At 15/16 x 2-5/32 x 11/32" 24 x 55 x 8.6mm, this rectangular speaker will easily fit inside your favorite locomotives. More Information Item # 50344 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov
$13.65
