$10 to $25
Woodland Scenics Woodland Scenics 5700 | Just Plug Lighting System - Lights & Hub Set | Multi Scale
All you need is power! This is the quickest and easiest way to add lights to any project. Use the individual dimmer controls to regulate light brightness. Add an optional Auxiliary Switch for convenient operation. Powering Your Light System- You will need one Just Plug Power Supply (JP5770 US, JP5771 Euro, JP5772 UK or JP5773 Aus/NZ) to power up to 50 lights on your light system, or if you want to power your system from a train power pack, purchase Connecting Cables (JP5760). RoHS compliant
£12.67
SoundTraxx SoundTraxx 852005 | DCC Mobile Decoder MC1H104P21
HO-scale, 4-function decoder that measures 25.1 x 15.6 x 4.7mm. This decoder has a 21-pin connector arranged according to the NMRA Standard that easily plugs into the factory-installed PCB of many models. This decoder will operate in DCC only. Dimensions: 25.1 x 15.6 x 4.7mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 DCC Track Voltage: 21 Volts Maximum
£17.95
SoundTraxx SoundTraxx 882006 | Econami ECO-21PNEM (1-amp) Digital Diesel Sound Decoder | HO Scale
The Econami ECO-21PNEM 1-amp Digital Sound Decoder simply plugs into models equipped with an NEM-supported 21-pin socket. The ECO-21PNEM can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Diesel Dimensions: 30.5 x 15.5 x 6.55mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 12
£54.54
Woodland Scenics Woodland Scenics 644 | Static-Tac® | Multi Scale
Static-Tac is specially formulated and has the right viscosity for adhering Static Grass and Briar Patch. It comes in a bottle with a graduated tip that works for large or small areas. Static-Tac is an easy-to-spread adhesive that dries to a clear matte finish for realistic results.
£6.73£6.06
Woodland Scenics Woodland Scenics 5740 | Just Plug Lighting System | Warm White LED Stick-On Lights
2 lights with 24" (60.9 cm) cable/pkg - 25mA each
£6.41
SoundTraxx SoundTraxx 810113 | 35 x 16mm Oval 8-ohm Speaker
This small oval speaker is ideal for narrow hood diesels. Dimensions: 35 x 16 x 8mm(D)Frequency Response: 250Hz – 13kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms
£10.24
SoundTraxx SoundTraxx 810135 | 9-pin JST to NMRA 8-pin Wiring Harness
The SoundTraxx 9-pin JST to NMRA 8-pin wiring harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.
£8.96
Woodland Scenics Woodland Scenics 628 | Static Grass Straw 12mm | Multi Scale
Static Grass 28 grams Grass length: 12mmm
£3.60£3.24
Woodland Scenics Woodland Scenics 620 | Static Grass Straw 4mm
Static Grass 42 grams Grass length: 4mm
£3.61£3.25
Woodland Scenics Woodland Scenics 615 | Static Grass Light Green 2mm
Static Grass 70 grams Grass length: 2mm
£3.60
Ring Engineering Ring Engineering WH-9 | RailPro Wiring Harness
Quantity: Two per packageThe WH-9 wiring harness can be used with all RailPro Locomotive modules. The WH-9 conforms to NMRA 9 pin plug standard so it can be used for any DCC locomotive where applicable. The WH-9 wiring harness can be used to add the required DCC 9 pin plug (JST) to a non-DCC locomotive. Or you can use it after removing all circuit boards from a DCC equipped or DCC ready locos (too allow a cleaner installation or make more room for a RailPro module). Please see LM instructions for actual wiring. JST connectors can come in two different ways that the pins are connected to the wires (crimp style and insulation displacement) both connect in the same manner and are interchangeable. However, we have found the crimp style pins to be far more dependable than the insulation displacement connectors that some DCC suppliers sell. WH-9 has a JST 9 pin with crimp style pins.
£5.13£4.61
SoundTraxx SoundTraxx 810112 | 25 x 14mm Oval 8-ohm Speaker
This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium. Dimensions: 25 x 14 x 5.2mm(D)Frequency Response: 300Hz – 20kHzPeak Power: 1.5 WattsImpedance: 8 Ohms
£10.24