Sure to be the focal point of any N Scale engine terminal, this Walthers Cornerstone 130' Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 130' turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns, 2-10-2s all the way up to a 4-8-8-4 Big Boy. It'll look great at your locomotive terminal, at junctions and anywhere else large steam locomotives must be turned. On your layout use the 130' Motorized Turntable as the heart of your servicing facility alongside other Cornerstone N Scale railroad buildings. 130' length typical of large tables built from 1920s on - some still in service today Must-have detail for engine terminals Holds locos up to 9-3/4" 24.7cm long - big enough for a 4-8-8-4! Layout mounting templates for pit and Cornerstone Turntable Control Box User-friendly, illustrated instructions simplify assembly Requires 9-15/16" 25.2cm mounting hole to be cut in layout for installation 10-3/8" 26.3cm overall diameter Control Box included for use on layouts with DC or DCC train control New Cornerstone Turntable Control Box for simple operation and programming with: Programmable indexing for up to 99 different tracks One-touch 180-degree bridge rotation in either direction Simplified LED display with adjustable brightness Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately) Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately) Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included) Comes with Code 80 rail installed on bridge

Read more less

Make any siding safer with Walthers Cornerstone N Scale Track Bumpers! Big steel bumpers like this have protected industrial sidings and station platforms for decades by preventing cars from running off the end of the tracks. These bumpers come fully assembled making them a snap to add to your steam or diesel-era scenes. Each set comes with five matching track bumpers that are easily installed on all brands of track.  Realistic end-of-track bumpers For use on any steam or diesel-era layout Based on common design used across North America Easily installed on all brands of track Fully assembled  Please Note - these models are based on prototype units used to keep cars from rolling off the end of track, but are not intended to stop a locomotive or train.

Read more less

Kit includes: 1 Warm White Stick-On LED 2 Warm White Nano LEDs Minimum 15" wire with Just Plug connector Miss Molly's Diner welcomes you with a spoonful of some good home cookin'. This N Scale Built-&-Ready® is styled like a train car eatery, hand-painted and authentically weathered for realism. It features a detached, classic sign, a menu board and other details for custom placement. The ready-made structure has an eye-catching printed interior complete with booths, a kitchen and other authentic diner features. This local establishment is open for business on your layout right of the package. Bring the diner to life with both interior and exterior pre-installed LED lighting made for use with the Just Plug® Lighting System. 30mA RoHS Compliant Pair this building with Just Plug Spotlights to highlight details like the detached, classic sign.

Read more less

Built-&-Ready® Landmark Structure®, Cozy Cabin, was designed for the outskirts and rural areas of a layout. The authentically weathered and hand-painted building is pre-lit and made for use with our Just Plug® Lighting System. This homey building features equally detailed interior and exterior features. Look inside through the screen door at the warm, flickering 3D fireplace in the center of the back wall with a rocking chair resting next to it. Pots, pans, lanterns and deer and fish mounts clutter the walls. A giant bear rug cloaks the center of the wood floor. The building is made up of logs, sealed together with chinking and has a rusty tin roof with patches. The natural stone chimney was inspired by hand-picked creek rocks. Additional features include rock steps that lead up to the covered porch, a wash tub, wooden bench and a stack of split wood resting on the side of the building.

Read more less

Bring your engine terminal to life with this Cornerstone Two-Stall 130' Brick Diesel House. Typical of shop buildings constructed from the 1930s on especially to repair and maintain diesels, structures like this can still be found at many terminals. Based on Milwaukee Road prototype, this engine house looks great in any diesel-era servicing scene and is adaptable to other industrial scenes. The Two-Stall 130' Brick Diesel House is one of many Cornerstone N Scale railroad buildings. Prototypes in service from 1930s to the present Must-have for major engine terminals and backshops Slotted base accepts popular rail sizes Easy-to-build plastic kit Molded in four appropriate colors and clear plastic Main Building: 10-3/4 x 6-3/4 x 3-1/4" 27.3 x 17.1 x 8.2cm Office: 3-1/8 x 1-5/8 x 1-1/4" 7.9 x 4.1 x 3.1cm More Information Item # 933-3266 Brand Walthers Cornerstone  Scale N Type Building Kit Size 10-3/4 x 6-3/4 x 3-1/4" or 27.3 x 17.1 x 8.2cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

From the early years of the 20th century to the present, buildings like the Walthers Cornerstone American Hardware Supply have been a familiar part of big city skylines. Just about any manufacturing operation could be found here over the years. You'll find this building is easy to modify for your needs too! Optional loading doors, windows or solid brick panels are provided for the ground floor so you can give your model a unique appearance. A modular design makes it easy to combine kits for a larger building, and there are many possibilities for kitbashing too. A concrete railroad loading dock and colorful signs for a variety of businesses round out this versatile structure. As shown American Hardware Supply measures: 8-1/4 x 5-3/4 x 6-7/8" 20.9 x 14.6 x 17.4cm American Hardware Supply is just one of a wide variety of Cornerstone N Scale industrial buildings. Classic 1900s design Brick construction Fits steam or diesel-eras Molded in appropriate color More Information Item # 933-3253 Brand Walthers Cornerstone  Scale N Type Building Kit Size 8-1/4 x 5-3/4 x 6-7/8" or 20.9 x 14.6 x 17.4cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

While most roads had one major backshop, the prototypes for the Walthers Cornerstone Machine Shop allowed railroads to make repairs at outlying terminals since it was often faster, more cost-effective and got the locomotives back on the road and earning their keep. As new engine terminals were built, most received a machine shop capable of handling just about any type of repair that might be needed. This kit matches the design of the Modern Roundhouse (933-3260, sold separately), and can be built as an attached or freestanding building. It also includes a boiler house, which would supply steam, electricity and compressed air to the entire facility. Large roll-up doors can be built open or closed, and the baseplate of the Machine Shop kit has slots that accept popular rail sizes. The Machine Shop is one of many Cornerstone N Scale railroad buildings. As shown the Machine Shop measures: 8-1/8 x 5-1/4 x 6-1/2" 20.6 x 13.3 x 16.5cm Authentic North American prototype Use with late steam and diesel-era layouts Matches design of Walthers Modern Roundhouse kit Separate windows Floor baseplate accepts popular rail sizes Molded in appropriate colors plus clear window glazing More Information Item # 933-3264 Brand Walthers Cornerstone  Scale N Type Building Kit Size 8-1/8 x 5-1/4 x 6-1/2" or 20.6 x 13.3 x 16.5cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

The prototypes for railroad buildings like the Walthers Cornerstone Car Shop evolved into long, specialized structures dedicated to freight or passenger car repairs. Several tracks ran the entire length of the building so cars could be moved quickly between workstations handling trucks, brakes, interiors and other appliances. Perfect for servicing any kind of equipment, this kit features a modular design so several can be combined to build a larger building, and it's a natural for modeling all kinds of heavy industries. Without the car shop, a railroad just doesn't run. Big enough to look right, small enough to fit steam or diesel-era layouts, this model is packed with features. Detailed brickwork, an authentic saw-tooth style roof with skylights, separate windows, roll-up doors, openings in the floor for rail, everything right down to the decals, is included. The basic Car Shop kit as shown builds a three-stall shop measuring 7 x 5-1/4 x 4-3/4" 17.7 x 13.3 x 12cm. The Car Shop is one of a wide variety of Cornerstone N Scale railroad buildings. 3-stall brick Car Shop Modular design allows kits to be combined for a larger complex Saw-tooth style roof Great for steam or diesel-era layouts Molded in appropriate colors and clear plastic More Information Item # 933-3228 Brand Walthers Cornerstone  Scale N Type Building Kit Size 7 x 5-1/4 x 4-3/4" or 17.7 x 13.3 x 12cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

The Walthers Cornerstone N Scale Industrial Office is typical of small buildings found at the entrance to large factories like steel mills and assembly shops. It's also ideal for use as a great free-standing small business, yard office or crew room. Structures like the Industrial Office are all over and look great in any industrial district. Use it in scenes with other Cornerstone N Scale industrial buildings. Realistic brickwork Realistic entry steps Decal signs for a variety of businesses Front awnings, gutters, downspouts and rooftop ventilators Use as railroad or trucking office, stand-alone business or entry building for manufacturing complex Molded in color plus clear glazing More Information Item # 933-3834 Brand Walthers Cornerstone  Scale N Type Building Kit Size 3-5/8 x 2-1/4 x 1-3/4" or 9.2 x 5.7 x 4.4cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

Revitalize your N Scale business community with the Modern Shopping Center I from Cornerstone(R), featuring three stores in one compact, contemporary structure! The model features a decorative front wall for added realism, detailed brickwork, large glass windows and entry doors, and colorful signs for a variety of businesses. More Information Item # 933-3891 Brand Walthers Cornerstone  Scale N Type Building Kit Size 6-1/4 x 3 x 2-1/8" or 15.8 x 7.6 x 5.3cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

Performing everything from painting to complete rebuilds, the prototypes for the Walthers Cornerstone Allied Rail Rebuilders kit captures the realism of these large buildings in a size that works on most layouts. Lots of details are included, such as an EMD 567 prime mover, separate roof vents, interior trusses, doors and windows. Allied Rail Rebuilders is typical of brick industrial and maintenance shops and is ideal for other types of heavy industries. Great for steam or diesel-era layouts Brick main building with clerestory Rooftop smokestacks Detailed interior trusses EMD 567 prime mover Molded in appropriate colors Realistic decals More Information Item # 933-3211 Brand Walthers Cornerstone  Scale N Type Building Kit Size 5-1/2 x 5-5/8 x 3-1/2" or 13.7 x 14 x 8.7cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less

At the Walthers Cornerstone Hardwood Furniture Company boxcar doors slide open. Ramps clang into place from the loading dock. Strong backs bend to their task as the first crates are carried out of the warehouse and into the car. Tucked into the cramped quarters of the industrial district, the Hardwood Furniture Company is the kind of industry that every layout needs. It's big enough to look right, small enough to fit and packed with realism. Check out the authentic architectural trim molded on each wall or the over 50 separate windows! There's a covered loading dock for boxcars and roll-up doors for trucks. Up on the roof, a water tank, elevator house and chimney are included to detail this important area. Complete instructions and colorful signs round out the kit. Plus, modelers who desire to make the Hardwood Furniture Company a larger building will find it's easy to expand with some minor kitbashing. Realistic concrete walls Recessed loading dock and tunnel on the first floor Signs for several businesses Molded in appropriate colors Easy-to-build plastic kit More Information Item # 933-3232 Brand Walthers Cornerstone  Scale N Type Building Kit Size 6-3/8 x 7-3/16" or 15.9 x 17.9cm Availability In-Stock/Restockable TCA Grading C-10 Mint - Brand New Instruction Sheet View/Download

Read more less