Track

33 products


  • Atlas 510 | Code 83 9ā€³ Straight Bulk Track Nickel Silver Rail | HO Scale

    Atlas Model Railroad Co. Atlas 510 | Code 83 9ā€³ Straight Bulk Track Nickel Silver Rail | HO Scale

    3 reviews

    Code 83 HO Scale Nickel Silver Rail Snap-Track pieces in bulk (no packaging). Pricing is per single piece.

    Ā£1.27

  • Atlas 524 | Code 83 Straight Track Assortment 10 Pack Nickel Silver Rail | HO Scale Atlas 524 | Code 83 Straight Track Assortment 10 Pack Nickel Silver Rail | HO Scale

    Atlas Model Railroad Co. Atlas 524 | Code 83 Straight Track Assortment 10 Pack Nickel Silver Rail | HO Scale

    Code 83 HO Scale Nickel Silver Rail Assortment Pack Includes: 2 x 3/4ā€³ Straight Track 2 x 1ā€³ Straight Track 2 x 1-1/4ā€³ Straight Track 2 x 1-1/2ā€³ Straight Track 2 x 2ā€³ Straight Track 2 x 2-1/2ā€³ Straight Track

    Ā£5.08

  • Sale Kato 24816 | Insulated Joiner 20pk | Multi Scale

    Kato Kato 24816 | Insulated Joiner 20pk | Multi Scale

    Kato's Insulated UniJoiners are used for electrically separating sections "blocks" on your layout. A "block" is a section of track long enough to hold a complete train (minimum requirement) on the main line or short enough to hold just a locomotive on a siding in a yard. This makes it ideal for additional operations and controlsĀ under DCC and which also allows for more advanced train detection. 20 per package. HO/N Scale

    Ā£3.19Ā£1.59

  • Circuitron 800-6212TB | Smail Slow Motion Switch Machine w Terminal Blocks - 12 Pack

    Circuitron Circuitron 800-6212TB | Smail Slow Motion Switch Machine w Terminal Blocks - 12 Pack

    2 reviews

    Free USA Shipping Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features 12 Pack DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAILā„¢ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-Itā„¢ Stationary Decoder technology, the SMAILā„¢ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAILā„¢ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CVā€™s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISEā„¢ and the SMAILā„¢ can be used with Circuitronā€™s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

    Ā£316.19

  • Atlas Model Railroad 542 | Code 83 Left Manual Switch Nickel Silver Rail | HO Scale

    Atlas Model Railroad Co. Atlas Model Railroad 542 | Code 83 Left Manual Switch Nickel Silver Rail | HO Scale

    Code 83 HO Scale Nickel Silver Rail 22ā€³ Radius Left Manual Snap-Switch

    Ā£12.80

  • Circuitron 800-6206TB | Smail Slow Motion Switch Machine w Terminal Blocks - 6 Pack

    Circuitron Circuitron 800-6206TB | Smail Slow Motion Switch Machine w Terminal Blocks - 6 Pack

    Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAILā„¢ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-Itā„¢ Stationary Decoder technology, the SMAILā„¢ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAILā„¢ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CVā€™s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISEā„¢ and the SMAILā„¢ can be used with Circuitronā€™s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

    Ā£161.69

  • Atlas 587 | Code 83 - Manual Switch Machine Right | HO Scale

    Atlas Model Railroad Co. Atlas 587 | Code 83 - Manual Switch Machine Right | HO Scale

    1 review

    Code 83 HO Scale Manual Switch Right Side

    Ā£3.96

  • Atlas 513 | Code 83 22ā€³ Radius Bulk Track Nickel Silver Rail | HO Scale

    Atlas Model Railroad Co. Atlas 513 | Code 83 22ā€³ Radius Bulk Track Nickel Silver Rail | HO Scale

    Code 83 HO Scale Nickel Silver Rail 22ā€³ Radius Curve Snap-Track pieces in bulk (no packaging). Pricing is per single piece.

    Ā£1.27

  • Sale Kato 2230 | Unitrack R670mm 26-3/8" Right Curved [4 pcs] | HO Scale

    Kato Kato 2230 | Unitrack R670mm 26-3/8" Right Curved [4 pcs] | HO Scale

    Kato's line of ground level UNITRACK offers a variety of pieces and turnouts to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Code 83Ā nickel silver rails AttachedĀ roadbed Compatible with DC (Analog) and DCC HO Scale 4 pack

    Ā£11.84Ā£5.92

  • Sale Kato 2210 | Unitrack R550mm 21-5/8" Radius Curve 22.5-Degree [4 pcs] | HO Scale

    Kato Kato 2210 | Unitrack R550mm 21-5/8" Radius Curve 22.5-Degree [4 pcs] | HO Scale

    Kato's line of ground level UNITRACK offers a variety of pieces and turnouts to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Code 83Ā nickel silver rails AttachedĀ roadbed Compatible with DC (Analog) and DCC HO Scale 4 pack

    Ā£11.28Ā£5.64

  • Atlas 525 | Code 83 - 2ā€³ Straight Track 4 Pack Nickel Silver Rail | HO Scale

    Atlas Model Railroad Co. Atlas 525 | Code 83 - 2ā€³ Straight Track 4 Pack Nickel Silver Rail | HO Scale

    Atlasā€™ code 83 line is fine quality, prototypical track for the modeler who is looking for track that is more exact-to-scale than code 100. Atlas code 83 track has fine brown ties and smaller nickel silver rail.Ā A big advantage of Atlasā€™ code 83 track is its reasonable price. With Atlas you know you are getting the best-looking, most affordable code 83 on the market today! Code 83 HO Scale Nickel Silver Rail 2ā€³ Straight Track 4 Pack

    Ā£4.76

  • ESU 51831 | SwitchPilot 3 Plus Accessory Decoder - For 8 Accessories | Multi Scale

    ESU LLC ESU 51831 | SwitchPilot 3 Plus Accessory Decoder - For 8 Accessories | Multi Scale

    SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 Plus is multi-protocol and can be used with control panels according to the MƤrklinĀ® MotorolaĀ® system (e.g. 6021, Central StationĀ® or Mobile StationĀ®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailComĀ®, CVs can also be read out. Functioning The SwitchPilot 3 Plus can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 16 transistor outputs, which are grouped in the 8 exit pairs 1 to 8. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case: In pulse mode, the output is switched on as soon as a switching command is received. Since the output automatically switches off again as soon as a time stored in the decoder has been reached, a burn-through of magnetic articles is prevented. At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps. In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Gerade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for incandescent lamp simulation). Set The SwitchPilot 3 Plus can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailComĀ® CVs. On request, he also learns the addresses directly via a programming button. The setting is, of course, the simplest with the integrated OLED displays as well as the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. "Programming" with the help of your headquarters is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 Plus are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51831 Brand ESU Scale Multi WARNING:Ā This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go toĀ www.P65Warnings.ca.gov

    Ā£54.63

© 2024 Squeaky's Trains & Things, Powered by Shopify

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Meta Pay
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account