Tools & Adhesives

Static King makes it easy to model large grassy areas and ensures Static Grass is applied vertically. The Static King has an ergonomic design and can be placed upside down for easy filling. It comes with different Sieve sizes for creating a varied effect using 2-12 mm lengths of Static Grass. A divider allows the use of multiple colors and sizes at the same time for modeling realistic fields and other tall grasses. The clear hopper ensures you always know how much Static Grass you have left. Built-in bleed-off function allows it to discharge safely on its own. Power is supplied via a Power Supply or battery.  Indicator light makes it easy to know if the Static King is turned on. Batteries and/or power supply not included, available as Add-On.

Read more less

The Circuitron Tortoise Switch Machine (6 Pack) Motor stalls at each end of throw No cutoff contact necessary Precision engineered gear-drive mechanism Enclosed construction Constant tension on switch points Ultra-Simple Mounting! No additional brackets or linkage necessary Fulcrum adjusts for use in all scales - Z to G. Prototypical Slow Motion Action! 3 seconds to complete the throw Convenient Auxiliary Contacts! 2 sets SPDT provided for powering the frogs or signals

Read more less

Spray-Tac is a spray adhesive for adhering Flowers and Plant Hues. It sprays in a fine mist and dries to a clear, matte finish.

Read more less

Tuft-Tac is a thick, high-tack adhesive. It holds its shape and is perfect for creating tufts of Static Grass or Field Grass. Tufts can be pre-made before being placed on a layout.

Read more less

Free USA Shipping Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features 12 Pack DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

Circuitron "Smail" Slow Motion Actuator with Integrated Logic (DCC Decoder Equipped) 12 Pack, 800-6212Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately). Compatible with all DCC systems that provide accessory address control. Two-wire connection to DCC bus with no external power necessary. Features DCC decoder equipped Optional DC mode 3 Second throw Bulletproof stall motor design SPDT contacts Simple under-layout installation. Detailed installation instructions The SMAIL™ is controlled by internal electronics manufactured by NCE Corporation. Utilizing an enhanced version of their proven Switch-It™ Stationary Decoder technology, the SMAIL™ is fully compatible with any DCC system that can provide accessory address control and/or signal control in either NMRA or Digitrax signal modes. The SMAIL™ can be used as a DCC Slow Motion Switch Machine in any scale and with all DCC system voltages. A simple programming procedure sets the address and advanced users have the ability to program individual CV’s (configuration variables).Mounting, mechanical options and specifications are all the same as the TORTOISE™ and the SMAIL™ can be used with Circuitron’s Remote Mount (800-6100) and Remote Signal Activator (800-8100).12 SMAILs per pack. Easy programming. May also be controlled with panel switches or detection circuits. Adjustable throw speed. Power up position user definable or will default to last used. Other specifications same as TORTOISE (800-6000).

Read more less

Speedi Driver Cleaner for HOn3 to O Scale Quickly and simply spins dirt and gum from locomotive drive wheels. Restores electrical pickup, eliminates erratic locomotive performance due to dirty, scummed wheel treads! Just clip brush leads any place on running rails, or to 12 volt DC power source. Locomotive motor thus powered, spins drivers against brush to whisk away grime and corrosion from driver treads in seconds. Works with DCC. A real hobby helper! NO SPECIAL WIRING REQUIRED! Package Includes: (1) Speedi Driver Cleaner for - HOn3 to O Scale

Read more less

Includes one each Plastic Compatible Gear Lubricant, Plastic Compatible Grease with PTFE and Plastic Compatible Motor Oil. For HO, O, S, On30, Lionel, LGB and all larger size trains. Comes with 7-1/2" extension needle adapter for those hard-to-reach places. Kit Includes:  #102 Micro-Gear Lube with PTFE #106 Micro Grease Lube with PTFE #107 Micro-Oil Lube Oil (Medium weight ISO 68)

Read more less

Use the Easy Rock Carving Tools with Carving Plaster to carve custom rock formations. The Strata Tool helps you carve and shape large areas fast to model strata, blasted rock and other weathered and eroded outcrops. The Carving Tool has two sides - a Chisel and a Pick. Use the Chisel to carve gouges and cavities. Use the Pick to carve grooves, fine-line abrasions and striation markings. Keep your carving area free from debris with the Duster. 3 piece set Specially formulated to work with Terrain and Landscape products, these tools and adhesives are designed to simplify your modeling efforts. They are fully tested for results, safety, quality and durability.

Read more less

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome configuration of magnetic article decoders, the SwitchPilot 3 has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons. Modes The SwitchPilot 3 is multi-protocol and can be used with workstations according to the Märklin® Motorola® system (e.g. 6021, Central Station® or Mobile Station®) as well as DCC-enabled control panels. The configuration can take place on both the main track and the programming track. Thanks to RailCom®, CVs can also be read out. Functioning The SwitchPilot 3 can be supplied directly from the digital system or from an external DC or change voltage source. It has a total of 8 transistor outputs, which are grouped in the 4 exit pairs 1 to 4. Each output pair contains two outputs (OutA and OutB) and can be configured individually for the desired use case:In pulse mode, the output is switched on as soon as a switching command is received. The fact that the output automatically switches off again as soon as the time stored in the decoder has elapsed prevents the burning of magnetic article drives.At the moment (K83-compatible) the output remains active as long as the button on the control panel is pressed. This operating mode is suitable for turnout drives with final shutdown or for de-caps.In bi-stable continuous operation (k84-compatible), the two outputs are switched on and off: When pressing the first button (red) on the control panel, the output Out A is switched on. It remains active until pressing the assigned button (green) activates the output Out B of the same output group. Out A and Out B behave like a change switch.In alternating flasher mode, the outputs Out A and Out B of an output pair are switched on alternately with an adjustable flashing frequency. The change indicator is started with the command "Ge- rade/Green" of the assigned button and stopped again with the command "Branching/Red".Optionally, the output can also be slowly dimmed and dimmed (so-called "zoom" for glow lam pen simulation).With the switch 3 mode switch, you can switch all output pairs together to the "k83" or "k84" modes at lightning speed, regardless of how they are configured. Feedback Since the SwitchPilot 3 is RailCom®-capable, all settings can be read out and changed directly in the built-in state on request. In combination with an ECoS as an ideal "partner", the SwitchPilot 3 can record and display the actual turnout setting with appropriately prepared turnout drives. Finally, you have the certainty that your switch has switched correctly! Set The SwitchPilot 3 can be flexibly adjusted either on the programming track with DCC control panels or on the main track with POM ("Programming on Main") or can also be read out via RailCom® CVs. On request, he also learns the addresses directly via a programming button. The easiest way to set is, of course, with the integrated OLED display and the three input buttons: All (!) Settings can be checked directly on the decoder and changed on request. A"Programming" with the help of your control panel is not required. It really can't be any easier. The ESU LokProgrammer can be used for firmware updates. Protection As with our locomotive decoders, the outputs of the SwitchPilot 3 are largely protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 51840 Brand ESU Scale Multi WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The Walthers Cornerstone HO Scale 90' Turntable is based on those used at small steam engine terminals. A vital part of train operations, this kit has ben carefully designed to fit most layouts and the 90' turntable has a one-piece pit for drop-in mounting. Once assembled, the bridge is manually position able. The kit includes the pit, gear drive, realistic decals and complete instructions. Complete hookup instructions cover wiring, adding track and more. The detailed bridge includes the operator's cab, handrails and a traditional arch (used to supply electrical power to the drive motors on the prototypes). This model can be motorized by adding Motorizing Kit 933-1050 (sold separately). The 90' Turntable is one of many Cornerstone HO Scale railroad buildings. Centerpiece for a small locomotive servicing area Manually position able Can be motorized by adding Motorizing Kit 933-1050 (sold separately) Molded in appropriate colors

Read more less

Animate your models in minutes with the Walthers Cornerstone Motorizing Kit. This fully assembled drive unit is a drop-in mount for Walthers Double Track Swing Bridge (933-3088), 90' Turntable Kit (933-3171) and the Walking Beam Oil Pumps in HO (933-3170) or N Scale (933-3248), all sold separately. The Motorizing Kit can easily be adapted to other models. It's complete with a rugged DC motor and has 360:1 gearing to insure smooth, slow speeds. PLEASE NOTE: This unit is for use with DC power only; maximum 12V, .25 amps. Use with Cornerstone structures that accept motorizing 360:1 gear ratio Works on standard DC

Read more less