The LM-3S-21 is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-3 Handheld Controller with a Color Touch Screen! After the LM-3S-21 is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 12 light outputs and sounds! The LM-3S-21 has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3S-21 module.  Then you will be able to touch the screen of the HC-3 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio! The LM-3S-21 is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.23 x 0.65 x 0.25 in Light Outputs 12    The LM-3S-21 is equipped with Direct Radio + NET! This allows Ring Engineering Controlling Devices such as the HC-3, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3S-21 through the air by use of RF transmission! The Direct Radio + NET is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3S-21 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3S-21! You can also load Sounds, Light Effects and much more!Your LM-3S-21 is equipped with Rail Sonic HD Sound System!  This is Ring Engineering's proprietary technology that allows your LM-3S to produce realistic locomotive sounds! Radio Load Sharing is a truly an innovative invention from Ring Engineering.   It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power.  Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup! Twelve light outputs.  Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more!  Additional light effects can be loaded using Direct Radio + NET! Built in protection with fault reporting by Direct Radio + NET! Tiny size 1.23 x 0.65 x 0.25 Inches for easy fit.

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam-2 Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

The TSU-1100 is one of SoundTraxx’s smallest sound decoders, yet is packed with a plethora of high-performance features! You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. SoundTraxx also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This micro 1-amp, universal-style format is ideal for small models with minimal space. It includes an optional capacitor or can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam-2 Dimensions: 27 x 10.5 x 5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) The TSU-4400 is designed for models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. STX810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam-2 Dimensions: 69 x 30.5 x 14mm Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 6 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16

Read more less

HO-scale, 4-function decoder that measures 74 x 17 x 3mm designed to replace the existing manufacturer light board in Atlas HO diesel models, some InterMountain Railway models, and those using a similar physical design. This decoder will operate in both DC and DCC. Dimensions: 74 x 17 x 3mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 DCC Track Voltage: 21 Volts Maximum

Read more less

HO-scale, 4-function decoder that measures 25 x 16 x 6mm with a 9-pin ‘universal’ JST wiring harness that is mostly used in older pre-DCC or brass models. This decoder will operate in both DC and DCC. Product Specifications: Dimensions: 25 x 16 x 6mmMax. Motor Stall Current: 1AMax. Function Current: 100mA (each output)Function Outputs: 4DCC Track Voltage: 21 Volts Maximum

Read more less

Tsunami2 meets N-Scale! The TSU-KN1 is our first plug and play Tsunami2 N-Scale decoder. Finally, you can get the Tsunami2 features you have been wanting in your N-Scale locomotives! We are excited to introduce a Plug and Play Tsunami2, N-Scale decoder and installation kit. The new TSU-KN1 is designed to fit into Kato N-Scale E, F-units, F40PH, PA and P42 locomotives. Get an easy install and the amazingly realistic sounds plus the features that all Tsunami2 decoders have to offer.   The TSU-KN1 comes with a complete installation kit ensuring an easy install. Also note that the TSU-KN1 is designed with 4 LED friendly function outputs making external resistors unnecessary! Installation kit includes: TSU-KN1 Decoder Mini Cube 3 Speaker and Baffle  Speaker Wire  Kapton Tape 2 Sunny White LEDs  Product Specifications: Dimensions: 55 x 13.8 x 3.2mm Max. Motor Stall Current: 500mA Max. Function Current: 100mA (each output) Function Outputs: 4 (LED Friendly. No resistors necessary) Audio Amplifier: 1 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16 Tsunami2 Digital Sound Decoders integrate a full-featured sound system, Hyperlight™ lighting effects, Hyperdrive2™ advanced motor control, and a DCC decoder into a single package. Tsunami2 Digital Sound Decoders offer 20+ lighting effects in each model! Other popular Tsunami2 features include: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes. We also offer a large selection of selectable sound effects including: 8 manufacturer specific prime movers, bells (12), airhorns (40+), couplers, compressors, and more!

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models.  DYNAMIC DIGITAL EXHAUST For added realism, you’ll love SoundTraxx's reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible. HIGH QUALITY SOUND LIBRARYSoundTraxx's large selection of high quality sound effects include:  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profile  Up to 12 Bells  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONThe BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models. This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Dimensions: 41.9 x 18.8 x 6.8mm  Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16   Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide   Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference   Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

Read more less

The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: EMD Diesel Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

Your train is no longer limited to locomotive sounds! This 16-bit, universal-style Digital Sound Decoder is the only DCC decoder to replicate railcar sounds and lighting effects. It includes selections for livestock sounds, airhorns, whistles, bells, and interior and exterior lighting effects for passenger cars, cab cars, and cabooses. Product Specifications: Dimensions: 48 x 13.5 x 9mmFunction Outputs: 4Max Function Current: 100mA (each output)Audio Amplifier: 1W, 8 Ohm loadMax Track Voltage: 27VSound Channels: 8 It is important to choose a capable speaker to use with these decoders. Below you will find a list of speakers that are compatible with the Tsunami SoundCar Digital Sound Decoder. 810053 20mm Round Speaker 810054 28mm Round Speaker 810089 15mm Round Speaker 810114 30mm Round Speaker  810153 28mm Round Speaker 810078 40 x 28.5mm Oval Speaker  810103 40 x 20mm Oval Speaker 810112 25 x 14mm Oval Speaker  810113 35 x 16mm Oval Speaker 810115 35 x 20mm Oval Speaker  810154 15 x 12 x 11.5mm Mini Cube 810155 *13 x 9 x 8.5mm Mini Cube2  810129 23mm Square Mega Bass Speaker 810130 27mm Round Mega Bass Speaker  810131 28mm Square Mega Bass Speaker * Note: When wiring multiple Mini Cube 2 speakers, P.N. 810155, use parallel format to decrease impedance and increase overall volume.

Read more less

The LM-3S is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3S is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-3S has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3S module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio!The LM-3S is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

Read more less

The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: EMD-2 Diesel Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less