$100 to $250

Create underwater features with Deep Pour Water and Water Undercoats for submerged water scenes or to imitate depth. Create any Murky aquatic ecosystem and add Surface Waters for the illusion of water movement and undeniable realism. Deep Pour Water dries hard and won't crack, is non-shrinking, and will not become discolored over time. Murky Water is translucent up to 1/2" pours. Contents make 12 fl oz (354 mL) This product cannot be shipped to internationally.

Read more less

CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Keep-Alive®: Included on-board for smooth, stutter-free operation. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notch™: A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values.   Specs Interface Type: Hard-Wire, Direct-Plug (9-Pin JST) Dimensions (L x W x H): 1.35″ x 0.658″ x 0.22″ or 34.29mm x 16.72mm x 5.59mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 6 Function Rating: 100 mA 12V Outputs: 6   Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.

Read more less

Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC “quick plug” equipped model. This adapter can also be used with SoundTraxx 9-Pin JST power harness (STX810069) to create a universal-style decoder. Dimensions: 22.5 x 16 x 7.5mm Support for up to 8 functions Solder Pads for CurrentKeeper, speaker connections and extra lights

Read more less

Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-4408The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible.HIGH QUALITY SOUND LIBRARYOur large selection of high quality sound effects include:  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profile  Up to 12 Bells  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONNo soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Dimensions: 69 x 30.5 x 14mm  Max. Motor Stall Current: 4A Max. Function Current: 400mA (each output) Function Outputs: 8 Audio Amplifier: 3 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 26V Sound Channels: 16   Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide   Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference   Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

Read more less

The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For O (& some G) Scale models Dimensions: 8"w x 16"

Read more less

Model tall grasses. Natural product, realistic color. Grass is 2 1/2" (6.35 cm) in length. Model Tall Grasses Natural Product Realistic Color 8 grams (0.28 oz) Grass length: 2 1/2″ (6.35 cm) Color may vary from actual product

Read more less

Use with Extension Wire to create custom lengths of Just Plug Cables. Reach Hubs anywhere on your layout or project.

Read more less

Water Ripples goes on clear and dries clear to create ripples. Customize your water colors by adding Water Tints or create whitecaps and foamy water with White Water Highlight™.

Read more less

The Econami ECO-21PNEM 1-amp Digital Sound Decoder simply plugs into models equipped with an NEM-supported 21-pin socket. The ECO-21PNEM can be wired to a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Steam Dimensions: 30.5 x 15.5 x 6.55mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 12

Read more less

Hand Crafted Pallets uniquely created by Squeaky’s Trains & Things. 20 Pack. 4 Pallet Variations (mixed bag) 3D printed with high quality materials. HO Scale Size: 0.59″ / 15mm length (1:87)

Read more less

Model shrubs, vines, undergrowth and trees Non-magnetic For any scale Colorfast 16 grams (0.56 oz) A synthetic fiber used to model shrubs, vines, undergrowth, other rambling vegetation and trees. Apply to the sides of buildings, Tunnel Portals, light poles, billboards and along fence rows, or other places you see vines grow. Great for quick and economical tree masses on your layout. Colorfast and non-magnetic. Use for any scale. Attach with Scenic Cement™.

Read more less

Code 83 HO Scale Nickel Silver Rail Assortment Pack Includes: 2 x 3/4″ Straight Track 2 x 1″ Straight Track 2 x 1-1/4″ Straight Track 2 x 1-1/2″ Straight Track 2 x 2″ Straight Track 2 x 2-1/2″ Straight Track

Read more less