The TSU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. They also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! The TSU-21PNEM8 can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: EMD Diesel Dimensions: 30.5 x 15.5 x 6.5mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 8 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

Soil Base Layer is pre-blended to give dark brown, soil-like realism. It easily adds texture and variation while covering your terrain feature, miniature base or gaming board. 9.72 in3 (159 cm3) More Information Item # G6423 Brand All Game Terrain Scale All Scales MSRP $3.99 About Base Layer Base Layer is pre-blended and easy to apply. Add texture and variation while covering your terrain feature, miniature base or gaming board. Available in Ground, Green, Earth, Soil and Snow. Please note, Snow is not pre-blended.

Read more less

Add texture and highlights to scenery Blends naturally with other foliage For any scale 57.7 in3 (945 cm3)

Read more less

The Rail Tracker cleaning tool actually follows the track and hugs the rail while you clean. This tool makes it easy to clean hard-to-reach areas like inside tunnels, around structures and under power lines. Kit includes all you need to clean and maintain your track. Package doubles as a tray for storage. Replacement pads available. Designed to work on N, HO, HOn3 and three-rail O scale track. Kit includes: Rail Tracker Rail Tracker Handle Clean Track Solution™ - 0.85 fl oz (25.1 mL) 2 Maintenance Pads 2 Rescue Pads™ 4 Cleaning Pads 4 Finishing Pads Instructions

Read more less

Paint rails, plates and spikes a realistic rust color. Transform your track quickly and easily to look as realistic as the rest of your layout. Use before or after installation to paint metal or plastic. Works for all scales. Includes extra tip. 1/pkg 10 mL (0.33 fl oz)

Read more less

Extension Wire is Just Plug-compatible and has soft insulation for easy stripping. Paired wire is color-coded for proper connection with Splicer Plugs and Extension Cable Kit.

Read more less

Water Ripples goes on clear and dries clear to create ripples. Customize your water colors by adding Water Tints or create whitecaps and foamy water with White Water Highlight™.

Read more less

Create underwater features with Deep Pour Water and Water Undercoats for submerged water scenes or to imitate depth. Create any Murky aquatic ecosystem and add Surface Waters for the illusion of water movement and undeniable realism. Deep Pour Water dries hard and won't crack, is non-shrinking, and will not become discolored over time. Murky Water is translucent up to 1/2" pours. Contents make 12 fl oz (354 mL) This product cannot be shipped to internationally.

Read more less

Create underwater features with Deep Pour Water and Water Undercoats for submerged water scenes or to imitate depth. Add Water Tints when modeling any aquatic ecosystem and Surface Waters for the illusion of water movement and undeniable realism. Deep Pour Water dries hard and won't crack, is non-shrinking, and will not become discolored over time. Contents make 12 fl oz (354 mL) This product cannot be shipped to internationally.

Read more less

This is one of our largest speakers for use with the TSU-4400 in O-scale or larger models. Dimensions: 50 x 90 x37.5mm(D)Frequency Response: 230Hz - 20kHzPower: 2 Watts (Nominal) 5 Watts (Peak)Impedance: 8 Ohms

Read more less

The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: ALCO Diesel Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco around the corner in the yard – on your model railroad? No problem with ESU’s LokProgrammer! One prerequisite: A PC with sound card and Windows (Windows 8.1 and higher). Simply record the original sound of your engine and edit it at home with your computer. Many customers did this already successfully. Even if you don’t yet belong to this elite group of LokSound Pro’s, the LokProgrammer is still a very useful tool for you. It is the easiest way to program your ESU-decoder. You need no programming experience, thanks to the graphic screen everything falls into place with a few mouse clicks. What the LokProgrammer can do: Change the sound safed on the decoder. Setting of all digital parameters of the Loksound decoder such as address of the loco, operation speed, maximum speed, braking deceleration, brightness of bulbs etc; you can set all options with your computer very easily - no cumbersome entering of CVs (configuration variables) with your command station. Rearrange your sounds and transfer it to the LokSound decoder. You can use all sounds that can be downloaded to your computer hard disk. Sound can be allocated to different events. Additional sounds can be activated via function buttons. Sound With the LokProgrammer you can erase the sound data of any LokSound decoder as many times as you wish, and replace it with a different sound. To this end we offer on our homepage more than 200 different, fully matching sounds of various prototypes and locos for downloading on your computer. Also you can edit just parts of a sound project: You don’t like the decoder’swhistle? Just replace it with one of the many others. Suitable sources beside those offered by us, are in Windows *.wav format available. Sound – even voice or music is no problem for our decoders. With the LokProgrammer’s aid you use the entire flexibility and functionality offered by LokSound decoders. Programming By the same token, all other ESU decoders profit from the LokProgrammer’s versatility; no matter if DCC, Multiprotocol - or mfx decoder. With its help it’s possible to edit all parameters of the particular decoder simply and conveniently. The available options depend on the kind of decoder. Beside addresses and acceleration - and deceleration settings, this concerns above all the allotment of function keys (function mapping), the allocation of special effects to the individual outputs, or the lamp brightness. The LokProgrammer can also help when optimizing back EMF parameters or the loadable speed table. All options can be programmed very conveniently: There is no tedious punching-in of CV-numbers at the digital station anymore. Hook up It’s this simple: The LokProgrammer is a small programming box, which is wired between the PC and a programming track. To connect it you need either a vacant serial interface, or you use the included USBadapter cable (works with Windows up to Windwos 10). For power we include a 500 mA wall power supply. If your needs are greater (e.g. for gauge I engines), you can also use a conventional model railroad transformer. Software After hook-up you start up the especially user-friendly LokProgrammer software. This runs on all modern Windows-systems (Windows 8.1 and higher). Just put the loco with the ESU decoder on your programming track, and right away you can read, edit or program it. The Programmer automatically recognizes the decoder in the engine. Simplicity The LokProgrammer is recommended not only for the use with our ESU decoders: By now, many well known model railroad manufacturers factory-furnish their locos with ESU-decoders, which of course can be modified again within the frame work of their technical specifications – with the help of the LokProgrammer. You see, purchasing a LokProgrammer pays off in any case. Upgrades The LokProgrammer can also be instrumental in updating decoders. Almost all ESU decoders are updatable, in case you desire a new software version. To do this, you only need the LokProgrammer and a small update-program, which you can download from our homepage. The future LokProgrammer software is being reviewed continuously. The latest, pertinent version can always be downloaded from our homepage, or can be installed automatically, through an internet-update function, on your computer. More Information Item # 53452 Brand ESU Scale Multi

Read more less