$25 to $50

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) Blunami will change the way you enjoy the model railroading hobby! The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models.  DYNAMIC DIGITAL EXHAUST For added realism, you’ll love SoundTraxx's reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible. HIGH QUALITY SOUND LIBRARYSoundTraxx's large selection of high quality sound effects include:  10 Exhaust Chuffs Up to 12 Prime Movers in each sound profile  Up to 12 Bells  90 Whistles 40+ Airhorns Additional couplers, dynamos, cab chatter and more! ADDED REALISMAdditional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATIONThe BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models. This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches. Dimensions: 41.9 x 18.8 x 6.8mm  Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16   Blunami Owner's Manual Blunami Installation Guide Blunami Steam User's Guide Blunami Diesel User's Guide Blunami Electric User's Guide   Blunami Sound Selection References: Blunami Steam-2 Sound Selection Reference Blunami EMD Sound Selection Reference Blunami EMD-2 Sound Selection Reference Blunami GE Sound Selection Reference Blunami ALCO Sound Selection Reference Blunami Baldwin & Others Sound Selection Reference Blunami Electric Sound Selection Reference   Blunami Sound Samples Blunami Steam-2 Sounds Blunami EMD Blunami EMD-2 Sounds Blunami GE Sounds Blunami ALCO Sounds Blunami Baldwin & Other Diesel Sounds Blunmai Electric Sounds SoundTraxx A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

Read more less

Use on business structures and rural outbuildings, billboards, signs, factory docks and more. 20mA set Dimensions - 0.484" w x 0.283" h (12.3 mm w x 7.2 mm h) RoHS Compliant

Read more less

Add texture and highlights to scenery Blends naturally with other foliage For any scale 57.7 in3 (945 cm3)

Read more less

Add texture and highlights to scenery Blends naturally with other foliage For any scale 57.7 in3 (945 cm3)

Read more less

This product is versatile in terms of direction of the placement of the board and mounting in various configurations.  It can easily replace a QSI board, a Dual Mode decoder board or be mounted directly on the electric motor or frame with Kapton tape.  (It is recommended that a piece of Kapton tape be placed on the bottom of the mother board to assure electrical isolation from the electric motor or frame.) This mother board does not include a 21 Pin Decoder. This mother board and connector board require soldering. These printed circuit boards are NOT INTENDED FOR USE IN A DC SYSTEM. The on board resistors are sized for some 12 volt LEDs.  Package Includes: 1x Mother Board 1x Connector Board Dimensions: 0.67" x 2.20" x 0.35" (17 mm x 56 mm x 0.9 mm)The mother board includes;  One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One pair of stay alive pads (U+ and GND) Two pairs of speaker pads wired in parallel Resistors for use with LED lighting.  (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs.  this accommodates incandescent lamps or bulbs.) The connector board contains pads for eight pairs of lighting function connections. U+ or the blue wire has eight connected pads for the common power source. The negative (-) discrete function pads are all labeled to indicate their connection to the functions available in the decoder. The lighting connector was designed so that the shell of the diesel locomotive can be easily separated from the frame without un-soldering wires. This does require that the headlight and rear lights be mounted in the shell of the locomotive and that the diesel has a removable dynamic brake shell. Incandescent lamps or bulbs are not well suited for the Decoder Buddys or associated decoders.  It can be done but it will require more electronics to achieve a result.  Our recommendation is to go with LEDs.

Read more less

The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications.  there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is  NOT INTENDED FOR USE IN A DC SYSTEM. Included with board are four axial resistors to be mounted remotely inline and are sized for LEDs. (2.2K) The mother board includes:  One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (separate axial 2.2K)  (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".)  It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!!  The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation.  Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)

Read more less

Wax adhesive for holding miniatures in place whilst allowing re-positioning. Easily remove with warm water and soap. 28 grams

Read more less

The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: ALCO Diesel Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

The TSU-2200 is a versatile Digital Sound Decoder that is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs (10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: EMD-2 Diesel Dimensions: 35 x 18 x 6mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 16

Read more less

Enjoy complimentary shipping!Bundle your purchases for even more savings with our free shipping option. (This offer is optional) The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.

Read more less

Use to light depots, rail yards, alley ways, sidings, parking lots and more. Includes extension poles to make the light poles taller for a broader reach. 20mA set Dimensions - 1.071" w x 3.449" h (27.2 mm w x 87.6 mm h) Dimensions with extension piece - 1.071" w x 5.516" h (27.2 mm w x 140.1 mm h) RoHS Compliant

Read more less

Spray-Tac is a spray adhesive for adhering Flowers and Plant Hues. It sprays in a fine mist and dries to a clear, matte finish.

Read more less