$50 to $100
-
Kadee Kadee 501 | Arch Bar Trucks with 33" Ribbed Back Wheels - Metal Fully Sprung | HO Scale
#501 Arch Bar Trucks with 33" Ribbed Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with a #2 or 2-56 screw.Mounting Screws not Included. The Arch Bar Truck is typical of these trucks from around the turn of the century. Despite the age of these trucks, they saw more than seventy years of service in some applications. The arch bar was allowed in interchange service until about 1941. On railroads that were not common carriers such as logging or other industrial lines, this restriction of the trucks did not apply since the trucks did not operate on rails other than the owner's. The Northern Pacific, for example, used truss rod frame maintenance of way cars fitted with arch bar trucks well into the early 1970's. Many logging railroads also used them at least until then. HO-Scale Metal Fully Sprung Trucks Features: Code 110 (.110) #523 33" Ribbed Back Wheels Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs Patent number 5,768,999 Package Includes: (2) Each #501 Arch Bar Trucks (assembled) The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.
£5.53
-
Kadee Kadee 558 | Barber® S-2 70-Ton Roller Bearing Self Centering Trucks with 33" Smooth Back Wheels - Metal Fully Sprung (HO Scale)
#558 Barber® S-2 70-Ton Self Centering Trucks with 33" Smooth Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with Kadee Self Centering bushing on a flat surface with a #2 or 2-56 screw or without the Kadee Self Centering bushing on a 0.140" or smaller molded on truck post secured with the original screw. The Barber S-2 70-ton Roller Bearing truck is a logical development from the original friction bearing truck first introduced in the 1940's. Our truck is based on a prototype built in 1967, however, the basic design was first introduced in the late 1950's. The sturdiness of the Barber® S-2 truck is evidenced by the forty plus years it has rode the rails to date. A careful observer will spot these trucks in interchange use today. This truck can be used under almost any pre-1970 built 70-ton rolling stock. The Bettendorf Double Truss Truck was introduced in the 1930's by U.S. railroads and was allowed to be used in interchange service through 1993. The Kadee® #500, #502 & #550 represent 50- ton trucks for 100,000 pound cars. HO-Scale Metal Fully Sprung Trucks Features: Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) #520 33" Smooth Back Wheels #442 Brake Pads - Wide Bolster Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Self Centering Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #637 HO Scale Truck Springs Patent number 5,768,999 Package Includes: (2) Each #558 Barber® S-2 70-Ton Self Centering Trucks (assembled) (2) #442 Brake Pads - Wide Bolster (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.
£6.89
-
Kadee Kadee 524 | 28" Diameter Smooth Back Metal Code 110 Wheels - Freight and Passenger (HO Scale)
#555 A.S.F.® 100-ton Roller Bearing Self Centering Trucks with 36" Smooth Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with Kadee Self Centering bushing on a flat surface with a #2 or 2-56 screw or without the Kadee Self Centering bushing on a 0.140" or smaller molded on truck post secured with the original screw. The A.S.F.® 100-ton Roller Bearing Truck is from the modern diesel era. It has standard 36 inch wheels and a longer wheel base than the 50 or 70 ton roller bearing trucks. Our model is a faithful reproduction of the American Steel Foundries® Ride Control® truck. This truck is currently in use under a variety of rolling stock in North America. The Bettendorf Double Truss Truck was introduced in the 1930's by U.S. railroads and was allowed to be used in interchange service through 1993. The Kadee® #500, #502 & #550 represent 50- ton trucks for 100,000 pound cars. HO-Scale Metal Fully Sprung Trucks Features: Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) #523 36" Smooth Back Wheels #442 Brake Pads - Wide Bolster Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Self Centering Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #638 HO Scale Truck Springs Patent number 5,768,999 Package Includes: (2) Each #555 A.S.F.® 100-ton Roller Bearing Self Centering Trucks (assembled) (2) #442 Brake Pads - Wide Bolster (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.
£7.36
-
Kadee Kadee 555 | A.S.F.® 100-ton Roller Bearing Self Centering Trucks with 36" Smooth Back Wheels - Metal Fully Sprung (HO Scale)
#555 A.S.F.® 100-ton Roller Bearing Self Centering Trucks with 36" Smooth Back Wheels - HO ScaleMetal Fully Sprung Equalized Trucks Mounts with Kadee Self Centering bushing on a flat surface with a #2 or 2-56 screw or without the Kadee Self Centering bushing on a 0.140" or smaller molded on truck post secured with the original screw. The A.S.F.® 100-ton Roller Bearing Truck is from the modern diesel era. It has standard 36 inch wheels and a longer wheel base than the 50 or 70 ton roller bearing trucks. Our model is a faithful reproduction of the American Steel Foundries® Ride Control® truck. This truck is currently in use under a variety of rolling stock in North America. The Bettendorf Double Truss Truck was introduced in the 1930's by U.S. railroads and was allowed to be used in interchange service through 1993. The Kadee® #500, #502 & #550 represent 50- ton trucks for 100,000 pound cars. HO-Scale Metal Fully Sprung Trucks Features: Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) #523 36" Smooth Back Wheels #442 Brake Pads - Wide Bolster Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Sprung Trucks Metal Sideframes & Fully Sprung Self Centering Bolster Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels #638 HO Scale Truck Springs Patent number 5,768,999 Package Includes: (2) Each #555 A.S.F.® 100-ton Roller Bearing Self Centering Trucks (assembled) (2) #442 Brake Pads - Wide Bolster (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.
£6.89
-
Kadee Kadee 582 | Barber - Bettendorf Self Centering Caboose Trucks with 33" Smooth Back Wheels - HGC (HO Scale)
#582 Barber - Bettendorf Self Centering Caboose Trucks with 33" Smooth Back Wheels - (Leaf Spring) - HO Scale"HGC" Two Piece Fully Equalized Trucks The Self-Centering Action trucks self align themselves parallel with the car for easier placement on track. Mounts with a #2 or 2-56 screw. "HGC" or High Gravity Compound, weighs nearly the same as Metal Trucks but with more detail & a 2 piece split bolster design for more efficient truck equalization, reduced axle friction for greater rolling performance. HO-Scale "HGC" Two Piece Fully Equalized Trucks Features: Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) #520 33" Smooth Back Wheels "HGC" Weighs nearly the same as Metal Trucks Superior Rolling Ability Clip on Brake Pads Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Fully Equalized Trucks Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels Patent number 7,434,518 B2 Package Includes: (2) Each #582 Barber - Bettendorf Self Centering Caboose Truck (Leaf Spring) (assembled) (2) Clip on Brake Pads (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.
£6.82
-
Kadee Kadee 580 | Bettendorf - AAR Self Centering Caboose Trucks with 33" Smooth Back Wheels - HGC (HO Scale)
#580 Bettendorf - AAR Self Centering Caboose Trucks with 33" Smooth Back Wheels - (Leaf Spring) - HO Scale"HGC" Two Piece Fully Equalized Trucks The Self-Centering Action trucks self align themselves parallel with the car for easier placement on track. Mounts with a #2 or 2-56 screw. "HGC" or High Gravity Compound, weighs nearly the same as Metal Trucks but with more detail & a 2 piece split bolster design for more efficient truck equalization, reduced axle friction for greater rolling performance. HO-Scale "HGC" Two Piece Fully Equalized Trucks Features: Self Centering Action - Trucks self align themselves parallel with the car for easier placement on track. Code 110 (.110) #520 33" Smooth Back Wheels "HGC" Weighs nearly the same as Metal Trucks Superior Rolling Ability Clip on Brake Pads Accurate Markings Incredible Detail True to Prototype Non-Magnetic Metal Wheels Highly Flexible Fully Equalized Trucks Smooth tracking Free Rolling Contoured Insulated Plastic Axles RP-25 Free Rolling Wheels Patent number 7,434,518 B2 Package Includes: (2) Each #580 Bettendorf - AAR Self Centering Caboose Truck (Leaf Spring) (assembled) (2) Clip on Brake Pads (2) Each Self Centering Bushing (2) Each #2 Screw The term Code 110 and Code 88 relates to the width of the wheels and has no relationship to track code. Code 110 wheels are .110" wide and Code 88 are .088" wide. Code 110 wheels are the common (or "Standard") width wheels and Code 88 are what is called "Semi-Scale" and are used when the modeler wants a more prototypical looking wheel width. Actual HO-Scale prototypical wheel width would be around .067" wide and although they will run OK on the average track they will not go through common turnouts and crossings. Code 88 (.088") is just about the minimum width of wheel that will run on most standard or common track if gauged correctly. It really is a matter of appearances because there's very little operational differences between running Code 110 or Code 88 wheels. Code 88 wheels look really good and are most noticeable on open frame cars like hoppers and tank cars. However, they also look great on boxcars, gondolas, and reefers but not quite as noticeable. As mentioned above track code and wheel code have no relationship meaning Code 110 and Code 88 will run on most any code of track. Track code is simply the measured height of the rail, code 100 is .100" tall, code 83 is .083" tall, code 70 is .070" tall, and so on.
£6.82
-
Broadway Limited Imports Broadway Limited 6960 | Northern Pacific A-3 4-8-4, #2661, Pre-1947, Black Boiler, Paragon4 Sound/DC/DCC, Smoke | HO Scale
By the 1920s the Northern Pacific Railroad needed bigger passenger locomotives. With the help of the American Locomotive Company's design engineers, NP designed a new locomotive with a massive firebox that had a 115 square foot grate area supported by a four wheel trailing truck. It was the first locomotive with a 4-8-4 wheel arrangement. ALCO delivered the first of 12 of these new locomotives in December of 1926, with the balance arriving early in 1927. Designated Class A, and assigned road numbers 2600 through 2611, they had 73" drivers, 28 x 30" cylinders, a boiler pressure of 210 psi, a tractive effort of 57,500 lbs and weighed 426,000 pounds. Later, the boiler pressure was raised to 240 psi which increased the tractive effort to 65,700 pounds. These were the first of this new wheel arrangement and thus were to be the namesake, with the name Northern Pacific selected which was very quickly shortened to just Northern. Ten Class A-2s (road numbers 2650 through 2659) came from the Baldwin Locomotive Works in 1934. These heavy Northerns had 77" drivers, 28 x 31" cylinders, a boiler pressure of 260 psi, a tractive effort of 69,800 lbs and a weight of 489,400 pounds. In 1938, The Northern Pacific took delivery of eight Class A-3s (road numbers 2660 through 2667), and at the sample time three more were delivered to the SP&S. The specifications for these locomotives were identical to the Class A-2 except that each weighed 2,400 pounds more. The SP&S locomotives were designated Class E-1. They were mostly identical to the Northern Pacific A-3's, except all three were oil burners. The eight Class A-4s (road numbers 2670 through 2677) were delivered by Baldwin in 1941, and had the same basic specifications as the A-3s, but were different in appearance, with 14 wheel centipede tenders and vestibule cabs, and they were 1000 pounds heavier. The last of the 4-8-4s purchased by the NP were the Class A-5s, which were built by Baldwin in 1943. This group of 10 (road numbers 2680 through 2689) were built to the same specifications as the Class A-4s, but turned out to be 16,200 lbs heavier. They were among the heaviest of all the Northern type locomotives ever built, at 508,500 pounds only the Santa Fe Class 2900s weighed more. There are no surviving Northern Pacific Northerns. Industry-Leading Features: NP and SP&S Northern Model Information: ALL-NEW Paragon4 Sound & Control System Synchronized Puffing Smoke with Chuff Sound Variable Puffing Smoke Intensity and timing Integral DCC Decoder with Back EMF for Industry Best Slow Speed Operation in DC and DCC Precision Drive Mechanism engineered for continuous heavy load towing and smooth slow speed operation 5-Pole Can Motor with Skew Wound Armature Built-in Capacity Pack for Improved Electrical Pick-up Premium Caliber Painting with Authentic Paint Schemes Prototypical Light Operation with Golden White LED Headlight, Rear Light Brass Locomotive and Tender Body Heavyweight Die Cast Chassis for Maximum Pulling Power Accurately Modeled with Multiple Detail Options Appropriate for Each Paint Scheme Option for Low Numberplate Beneath Headlight Option for High or Low Numberboards where Accurate Smokestack Extension Present Where Appropriate Prototypically Accurate Paint Schemes for Each Model Many Separately Applied Details Including Handrails, Grab Irons, Ladders, Piping, Whistle, and Brass Bell Equipped with Traction Tires for Increased Pulling Power Engineer and Fireman Figures Installed Will Operate on Code 70, 83, and 100 rail Recommended Minimum Radius: 18 inches Accurate Prototypical Sounds for the UP CSA-2 Challenger Broadway Limited Imports is proud to introduce Paragon4: The new benchmark for premium HO sound-equipped locomotives. These DC and DCC-Sound equipped locomotives feature the ALL-NEW Paragon4 sound and control system. Each Paragon4 locomotive comes with BLI's own integral DCC Decoder factory installed. Paragon4 locomotives offer Dual Mode DC and DCC operation with superb back EMF motor control, improved DC motor control, built-in capacitor pack for more reliable electrical pick-up, industry best on-board sound with Rolling Thunder functionality, Pro Lighting Mode for prototypical light control, Switcher model for precise low speed control, recordable DCC operation for automated playback, and the same excellent detail level as Broadway Limited's Paragon3 Series models. Paragon4 Sound & Control System Features: Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound) Built-In capacitor pack to navigate imperfect track Capacitor Pack automatically disabled on program track for full compatibility with JMRI Decoder Pro Pro Lighting Mode offers individual control of all lights on model Switcher Mode for precise low speed control. Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation High Resolution Audio Quillable Whistle for various whistle lengths and patterns Choice of 3 selectable Horns Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played Adjustable bell ringing interval for faster or slower bell Numerous user-mappable functions with available keys Johnson Bar Sound at Direction Change Multiple realistic passenger and crew sounds play on command Grade Crossing Automatic Signal Automatic Forward / Reverse Signal - When activated, stopping triggers and stop whistle toot. When moving forward from a stopped position, toots twice. When moving in reverse. toots three times. Chuff sound intensity varies with load Individually adjustable sound volumes for each effect EZ Reset Button for quick return to factory default settings **Specifications on this page subject to change.
£515.75
-
Kadee Kadee 33 | 30-Series Plastic Couplers with Gearboxes - Short (1/4") Centerset Shank
This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #33 Magne-Matic® Plastic Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom. Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox. The #143 Whisker® Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #33 Coupler. The Whisker® Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly. Other Whisker® Coupler #33 equivalent options include #153 Whisker® "Scale" Metal Coupler when mounted a #252 Snap-together Gearbox. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Two pair per package Made in the U.S.A. HO-Scale Package Includes: (2) Pair #33 Plastic Shank Couplers - Short Centerset Shank (2) Pair #621 Torsion Centering Spring (2) Pair #233 Gearboxes & Lids (2) Pair #210 Washers (2) Pair #256 - 2-56 Screws (2) #622 Knuckle Springs #33 Plastic Coupler Features: Material - Metal Knuckle, Plastic Coupler Shank Shank Length - Short (1/4") (center hole to back of coupler head) Coupler Offset - Centerset Knuckle Spring - #622 Centering System - Standard Shank Centering Spring - #621 Torsion Centering Spring Head - Standard Head Works With - #233 draft gearboxes #233 Plastic Draft Gearboxes & Lids Features: Material - Insulated Plastic Dimensions - 3/8"L x 5/16"W x 9/64"H Works With - NO.5®, #58, 20-Series Couplers #33 in a #233 gearbox on top. Mounting Specifications: Mounting Height - 1/2" Centerline - 25/64" Trip Pin Height - 1/32" Center Hole - 2-56 Insulated Screws are the most commonly used. (Screw length will vary) #33 in a #233 gearbox on bottom. Mounting Specifications: Mounting Height - 29/64" Centerline - 25/64" Trip Pin Height - 1/32" Center Hole - 2-56 Insulated Screws are the most commonly used. (Screw length will vary)
£3.03
-
Kadee Kadee 451 | Extended Swing Gearbox & Whisker Metal Couplers - Medium (9/32") Centerset Shank
Body Mount Extended Swing Gearbox and Medium (9/32") Centerset Shank Whisker® Coupler for passenger or long freight cars allowing negotiating tighter radius curves. It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. One pair per package HO-Scale Made in the U.S.A. Package Includes: (1) Pair #148 Whisker® Metal Couplers - Medium Centerset Shank (1) Pair #451 Gearboxes and lids (1) Pair Centering Bushings (1) Pair 0-80 x 1/8" Flat Machine Screws (1) Pair 2-56 x 3/8" Flat Machine Screws (1) Pair Bushing Centering Springs (1) Pair Assorted Shims (1) Extra Springs #148 Whisker® Metal Coupler Features: Material - Metal Shank Length - Medium (9/32") (center hole to back of coupler head) Coupler Offset - Centerset Knuckle Spring - #622 Centering System - Whisker® Head - Standard Head
£4.92
-
Broadway Limited Imports Broadway Limited 7155 | 3-Bay Hopper, Chessie System (C&O), Black w/ Yellow, 2-pack B | N Scale
On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined. The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999. That is one impressive class! N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes. In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme. We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout. The hopper car models come completely assembled and decorated. Each 2-pack contains two distinctive cars with different road numbers. Industry-leading Model Features: Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius: 9 inches.
£33.36
-
Broadway Limited Imports Broadway Limited 7154 | 3-Bay Hopper, Chessie System (C&O), Black w/ Yellow, 2-pack A | N Scale
On the N&W, hopper cars were the most common type of freight cars on the roster - about a 4-to-1 ratio of hopper cars over all other cars combined. The H2a 3-Bay Hopper was the most common type, and was numbered from 15,500 - 25,499; 26,000 - 26,999; 28,500 - 29,999; and 31,000 - 31,999. That is one impressive class! N&W also leased these hopper cars to PRR and B&O where they were painted in their respective schemes. In this production run, we are offering models of three N&W paint schemes, one PRR scheme, and one B&O scheme. We are also building models of H2a cars painted in the liveries of four other major railroads who owned similar cars, and we have built four fantasy models that will add fun to your layout. The hopper car models come completely assembled and decorated. Each 2-pack contains two distinctive cars with different road numbers. Industry-leading Model Features: Plastic (ABS) body with ABS chassis Metal wheels and axles milled for Ultra-Smooth Friction-Free movement Detailed Underbody Removable Coal Load Detailed Interior Operating Knuckle Couplers Will Operate on Code 55, 70, and 80 rail Minimum Operating Radius: 9 inches.
£33.36
-
TATTU Tattu 14.8V 450mAh 75C 4S LiPo Battery Pack with XT30 Plug
Tattu 14.8V 450mAh Lipo battery Specification：Battery Voltage：14.8V Configuration：4S1P； Capacity：450mAh；Discharge: 75C Plug: XT30 Plug.Z Dimensions: Tattu 450mAh 4S Lipo battery dimensions is: 45*24*27mm/1.77*0.94*1.06inch; Approx Weight:54g/1.90oz. High Performance: Tattu 4S 450mAh Lipo battery with 75C discharge rate hardcase offers high power. Application: Tattu 4S 450mAh Lipo battery
£13.64
