Best Sellers

Use Burnt Grass Fine Turf to model realistic burnt grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale. Add texture and highlights to scenery Model Grass, weeds, and dirt Blends naturally with other foliage Colorfast For any scale 21.6 in3 (353 cm3)

Read more less

This is SoundTraxx’s largest Megabass speaker which provides the best low frequency bass sounds for your steam, diesel, and electric models. Dimensions: 28 x 28 x 11.2mm(D)Frequency Response: 200Hz – 20kHzPeak Power: 4 WattsImpedance: 8 Ohms

Read more less

This tiny, high-output speaker is suitable for N-scale and larger models. Dimensions: 20 x 3.2mm(D)Frequency Response: 475Hz – 9kHzPeak Power: 1 WattImpedance: 8 Ohms

Read more less

By default, this decoder does not come with a pre-programmed Sound Profile. Nevertheless, we provide complimentary Sound File programming for all ESU decoders. Please be aware that opting for Sound File Programming in your order might result in a shipment delay of 1 to 2 business days. Visit this link to preview ESU Sounds 21MTC NEM6660 Harness Plug, 30 x 15.5mm Version The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker. Operating modes Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021. The M4 protocol supports the automatic registration on mfx® compatible central units. The LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts. Sound The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. Functions We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. Motor control Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types. LokSound 5 DCC The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. More Information Item # 58429  Brand ESU Scale HO & O WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

All aboard for hours of HO model railroading fun with the WalthersTrainline Flyer Express starter set. With everything you need to get going, each is complete with: Hobby-quality all-in-one sets built for years of fun Power-Loc(TM) Track with: - Nickel silver rail, brown ties and gray roadbed for more realism - Simple, sturdy construction, snaps-together without tools or rail joiners! - Includes 14 track sections to build a 38 x 45" (0.96 x 1.1m) oval Expand any time with matching track and accessories available separately Powered GP15-1 diesel with working headlight 3 assembled cars with metal wheels and Proto MAX(TM) metal knuckle couplers: - Matching wide vision caboose - 53' Norfolk Southern smooth side gondola - 50' Conrail insulated boxcar Power pack and speed/direction controller Full-color "Walthers Getting Started Guide" for new modelers Complete set-up and operating instructions

Read more less

Ready for the drive-in, Fancy here loves date nights. Just Plug® Vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layout's traffic has never looked so realistic. Add a Vehicle to a Just Plug Light Hub for easy installation. Just Plug and you're done! 20mA per Vehicle RoHS Compliant

Read more less

This cruiser will take every opportunity to hit the blacktop, whether you're going for a scenic drive or a city run. Just Plug® Vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layout's traffic has never looked so realistic. Add a Vehicle to a Just Plug Light Hub for easy installation. Just Plug and you're done! 20mA per Vehicle RoHS Compliant

Read more less

This speaker is the Mini Cube 3. We just love the amazing sound that you can get out of this tiny speaker. The Mini Cube 3 is only 12 x 5.5 x 3mm, but the sound it produces will blow your mind!  George has shown this speaker off in YouTube videos with the N-Scale TSU-KN1 decoder.  Dimensions: 12.5 x 5.5 x 3mm(D)Frequency Response: 800Hz - 20kHzPower: 0.3 Watts (Nominal) 0.5 Watts (Peak)Impedance: 8 Ohms Note: For best performance, seal the speaker to the baffle with a light RTV-style adhesive.  To avoid damaging the 0.5 watt Mini Cube 3 speaker, they are best used in pairs and wired in series. 

Read more less

Line HO Scale Double Crossbar Pre-Wired Poles alongside railroad tracks to model telephone poles used for communication on the railroad. They are hand-painted and feature weathered wood poles, guy wires and other authentic details. Pre-Wired Poles can be installed in minutes. Simply drill holes, pull poles out of packaging, slide along wire and plant in place. Each pole is placed approx. 80 scale feet apart or 11" (27.9 cm) in HO scale. Woodland Scenics Utility System - HO Scale Woodland Scenics 2268 | Substation Woodland Scenics 2266 | Pre-Wired Poles - Double Crossbar Woodland Scenics 2265 | Pre-Wired Poles - Single Crossbar Woodland Scenics 2267 | Transformer Connect Set

Read more less

Brand: JT's Mega Steam Scent: Big Boy-Premium Blend Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

Model tall grasses. Natural product, realistic color. Grass is 2 1/2" (6.35 cm) in length. Model Tall Grasses Natural Product Realistic Color 8 grams (0.28 oz) Grass length: 2 1/2″ (6.35 cm) Color may vary from actual product

Read more less

Add texture and highlights to scenery Blends naturally with other foliage For any scale 57.7 in3 (945 cm3)

Read more less