DCC Decoders
Train Control Systems Train Control Systems (TCS) 1303 | G8 Decoder
The full featured, 8 function, hard-wire, G-Scale decoder is tough enough to provide power for large engines, yet capable of creeping at ultra-slow speed due to the excellent TCS auto-adjusting BEMF. The G8 will have your locomotive running like the real thing. With 8 light functions, and easy-to-use screw terminal connections, the G8 has the features you want in a rugged form factor for prolonged outdoor operation. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for "buzz" free motor performance. DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC. RailCom®: This feature allows the decoder to talk to the command station. RailCom supports expansion for new features. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Dimensions: (L x W x H): 3.012”x1.46”x0.526” or 76.52mm x 37.07mm x 13.36mm Scale: G Scale, O Scale Continuous/Peak: 4.0/8.0 Amp Total Functions: 8 Function Rating: 500 mA 12V Outputs: 8
£51.80£46.62
SoundTraxx SoundTraxx 851002 | DCC Mobile Decoder MC1Z102SQ
Z/N-scale, 2-function decoder that measures 13 x 9 x 3mm with an attached wire harness, or ‘squid cable,' for easy installation in some Z and most N-scale models. This decoder will operate in DCC only. Dimensions: 13 x 9 x 3mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 2 DCC Track Voltage: 21 Volts Maximum
£23.49
SoundTraxx SoundTraxx 851001 | DCC Mobile Decoder MC1Z102P6 | N/Z Scale
Z/N-scale, 2-function decoder that measures 13 x 9 x 3mm and is available with a 6-pin NEM651 connector popular in many European models. This decoder will operate in DCC only. Dimensions: 13 x 9 x 3mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 2 DCC Track Voltage: 21 Volts Maximum
£20.90
Ring Engineering Ring Engineering LM-4S-G | RailPro 'G' Scale Locomotive Module with Sound | G Scale
The LM-4S-G is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-4S-G is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-4S-G has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-4S-G module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio! Product Specifications: Sound Profile: Universal (all) Dimensions: 3.35 x 1.32 x 0.57 in DCC Track Voltage: 7.5V – 18V Light Outputs 6 Package Contents: LM-4S-G Locomotive Module WH-9 9 Pin Wiring Harness Instruction Sheet The LM-4S-G is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-4S-G through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-4S-G with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-4S-G! You can also load Sounds, Light Effects and much more!Your LM-4S-G is equipped with Rail Sonic HD Sound System! This is Ring Engineering's technology that allows your LM-4S-G to produce realistic locomotive sounds!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 3.35 x 1.32 x 0.57 Inches for easy fit. Important: If you are running your trains outside be sure to buy the model HC-2-SUN handheld controller instead of the standard model HC-2. The HC-2-SUN is easily readable in sunlight. The HC-2 screen was designed for indoor use and looks real good inside. Outside the standard HC-2 screen can look washed out when the sun shines on it.
£121.50
SoundTraxx SoundTraxx 852002 | DCC Mobile Decoder MC2H104AT | HO Scale
HO-scale, 4-function decoder that measures 74 x 17 x 3mm designed to replace the existing manufacturer light board in Atlas HO diesel models, some InterMountain Railway models, and those using a similar physical design. This decoder will operate in both DC and DCC. Dimensions: 74 x 17 x 3mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 DCC Track Voltage: 21 Volts Maximum
£18.76
Ring Engineering Ring Engineering LM-3 | RailPro HO Scale Locomotive Module without Sound
The LM-3 is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3 is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs! The LM-3 has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3 module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive!The LM-3 is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V – 18V Light Outputs 6 The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.
£40.49
Digitrax Digitrax SDXH167D | Series 7 Sound Decoder | HO Scale
Upgrade your model trains with the Digitrax SDXH167D series 7 sound decoder for HO Scale. Expertly designed with advanced technology, this decoder delivers clear and realistic sound effects for an immersive experience. Enjoy precise control and enhanced functionality with this top-notch decoder. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker 300uF Capacitor More Information Item # SDXH167D Brand Digitrax Scale HO Scale MSRP $59.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£38.23
Digitrax Digitrax DH165A0 | 1.0 Amp Mobile Decoder for Atlas HO Locomotives | HO Scale
The Digitrax DH165A0 is a high-performing mobile decoder specifically designed for Atlas HO scale locomotives. With a 1.0 amp capacity, it provides precise and reliable control of your trains. Perfect for hobbyists and collectors looking for top-quality performance. DH165A0 fits Athearn Genesis, Kato, Stewart, Atlas & Other HO Locomotives. Compatible with Sound Bug Sound Only DecodersDecoder Lock equipped Specifications Current Rating-Motor: 1.25 Amp (2.0 Amps Peak) Dimensions: 2.877” x .667” x .173”(73.07mm x 16.93mm x4.4mm) Installation: Board Replacement (read more) Function Outputs: 6-500mA Function Type: FX3 (read more) Features: Series 5 (read more) For Use With: Sound Bug Sound Only Decoder Warranty: No Worries Warranty (read more) More Information Item # DH165A0 Brand Digitrax Scale HO Scale MSRP 30.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Decoder Manual V1 / Specification Sheet / Decoder Manual V2 (01/2014)
£19.44
Digitrax Digitrax DH126PS | 1.5 Amp Economy Decoder with Digitrax Easy Connect 9 Pin to DCC Medium Plug 1.0” harness | HO Scale
As a product expert in the field of model trains, the Digitrax DH126PS is a top choice for HO scale enthusiasts. With a 1.5 amp economy decoder and Digitrax Easy Connect 9 pin, this decoder offers easy installation and optimal performance. Upgrade your layout with this highly efficient and reliable decoder. .672” x 1.074” x .259”17.08mm x 27.28mm x 6.6mm Digitrax Easy Connect 9 Pin Harness 1.5 Amp/2 Amp Peak Current Rating 2 FX3 Functions, 0.5 Amp Total Function Current Rating ▪FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control. Realistic Effects like Ditch lights, Mars lights, strobes, and many more FX3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving. FX3 effects optimized for selectable LED or lamp operation Configurable FX3 Pulse Function available on all function outputs. Function Remapping for custom function setup. Master Light Switch turns off all lights & functions with one keystroke. Advanced Consist Function Controls▪Digitrax LocoMotion® System-Your locomotives look like the real thing. The Digitrax LocoMotion System makes them run like the real thing, too! Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. Switching Speed feature for easier and faster access to yard speeds. 3 Step Speed Tables set start, mid and max voltage for custom control. 28 Step Speed Tables with 256 level resolution for precise control.▪Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.▪Series 6 Decoder Features.▪2 Digit and 4 Digit Addressing.▪Basic, Advanced & UniVersal Consisting.▪SuperSonic motor drive for silent operation.▪Direct mode programming.▪Decoder Reset CV with or without speed table reset.▪Transponder Equipped ready for transponding on your Layout.▪Motor Isolation Protection helps prevent damage to your decoder.▪DCC Compatible.▪FCC Part 15, Class B RFI compliant.▪Digitrax “No Worries” Warranty. Specifications Current Rating-Motor: 1.5/2.0 Amps Max Dimensions: .672” x 1.074” x .259” (17.08mm x 27.28mm x 6.6mm) Installation: DCC Medium Plug Long Harness (read more) Function Outputs: 2 (read more) Function Type: FX3 (read more) Features: Series 6 (read more) For Use With: PX112-2 Current Rating-Functions: 0.5 Amps total all functions Original Release Date: 02-04-2014 Warranty: No Worries Warranty (read more) More Information Item # DH126P Brand Digitrax Scale HO Scale MSRP 26.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Decoder Manual V2 (01/2014) / Specification Sheet
£16.85
Digitrax Digitrax DH126MT | Locomotives Equipped with 21MTC interface | HO Scale
Upgrade your HO scale locomotives with the Digitrax DH126MT. Equipped with a 21MTC interface, this decoder allows for smoother operation and increased data transfer. Perfect for serious model train enthusiasts looking for top-notch performance. Fits HO Scale Locomotives Equipped with 21MTC interface 1.5 Amp/2 Amp Peak 2 FX3 Functions, 0.5 Amp Series 6 Decoder Features. Works with PX112-2 Power Xtender. .805”x.64”x.17” 20.45mm x 16.26mm x 4.32mm More Information Item # DH126MT Brand Digitrax Scale HO Scale MSRP 27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals DH126MT Instruction Sheet / Specification Sheet
£17.50
