Digitrax DH126D is the perfect solution for an economy HO scale wired mobile decoder. With a 1.5 amp capacity, this decoder offers reliable and efficient performance for HO scale model trains. Upgrade your model train experience with the Digitrax DH126D decoder. .672” x 1.074” x .259”17.08mm x 27.28mm x 6.6mm Digitrax Easy Connect 9 Pin Harness 1.5 Amp/2 Amp Peak Current Rating 2 FX3 Functions, 0.5 Amp Total Function Current Rating ▪FX3 Function outputs for prototypical lighting effects and on/off control:     Constant Brightness Lighting with directional or independent control.     Realistic Effects like Ditch lights, Mars lights, strobes, and many more     FX3 & Standard Function Qualifiers operate functions based on direction,     F0 on or off, direction and F0, and whether loco is moving.     FX3 effects optimized for selectable LED or lamp operation     Configurable FX3 Pulse Function available on all function outputs.     Function Remapping for custom function setup.     Master Light Switch turns off all lights & functions with one keystroke.     Advanced Consist Function Controls ▪Digitrax LocoMotion® System-Your locomotives look like the real thing.     The Digitrax LocoMotion System makes them run like the real thing, too!     Torque Compensation for smooth as silk silent operation.     128 Speed Step operation (14 or 28 steps can also be used).     Momentum with acceleration and deceleration.     Normal Direction of Travel is user selectable.     Switching Speed feature for easier and faster access to yard speeds.     3 Step Speed Tables set start, mid and max voltage for custom control.     28 Step Speed Tables with 256 level resolution for precise control. ▪Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.▪Series 6 Decoder Features.▪2 Digit and 4 Digit Addressing.▪Basic, Advanced & UniVersal Consisting.▪SuperSonic motor drive for silent operation.▪Direct mode programming.▪Decoder Reset CV with or without speed table reset.▪Transponder Equipped ready for transponding on your Layout.▪Motor Isolation Protection helps prevent damage to your decoder.▪DCC Compatible.▪FCC Part 15, Class B RFI compliant.▪Digitrax “No Worries” Warranty. Specifications Current Rating-Motor: 1.5/2.0 Amps Max Dimensions: .672” x 1.074” x .259” (17.08mm x 27.28mm x 6.6mm) Installation: Digitrax 9 pin to wires Function Outputs: 2 (read more) Function Type: FX3 (read more) Features: Series 6 (read more) For Use With: PX112-2 Current Rating-Functions: 0.5 Amps total all functions Original Release Date: 02-04-2014 Warranty: No Worries Warranty (read more) More Information Item # DH126D Brand Digitrax Scale HO Scale MSRP 23.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Decoder Manual V2 (01/2014) / Specification Sheet

Read more less

21MTC NEM660 Interface Version The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot 5 decoders are offered with all common interfaces.  Modes The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl. The decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist. The LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU / ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations. The LokPilot 5 DCC decoder can be used on analog DC trains. The top speedcan be set separately. The decoder switches between the operating modes fully automatically "on-the-fly". Features We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCCDecoder at least 10 amplified function outputs with 250mA output current each. In the executionswith PluX22 or 21MTC interface there are 4 outputs to control servos orLogic level outputs added. All-important lighting functions are available. The brightness of each outputcan be set separately. The decoder masters automatic pushing and pullingwhen uncoupling for ROCO®, Krois® and Telex® couplings. Motor control The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustablePWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors.Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs  which can be adjusted for difficult cases. The unique "Autotune" function enablesthe automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors. Operational safety On request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections. Protection Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 59629  Brand ESU Scale HO & O WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned at half the size of a KA4, the KA2 will power HO or N scale locomotives with approximately one-third of the capacitance of KA3/KA4 devices (depending on the locomotive and motor). This Keep-Alive® includes a blue and a black w/ white stripe wire with which to attach it to a decoder. Dimensions: 0.35" x 0.35" x 0.61" or 8.9mm x 8.9mm x 15.5mm Scale: HO Scale, N Scale Input Rating: 12 to 16V

Read more less

Increase the power and functionality of your HO scale model trains with the Digitrax DH126P decoder. With a 1.5 amp capacity and Digitrax Easy Connect 9 Pin to DCC Medium Plug 3.0" harness, this decoder allows for smoother and more accurate locomotive control. Upgrade your layout today. .672” x 1.074” x .259”17.08mm x 27.28mm x 6.6mm Digitrax Easy Connect 9 Pin Harness 1.5 Amp/2 Amp Peak Current Rating 2 FX3 Functions, 0.5 Amp Total Function Current Rating ▪FX3 Function outputs for prototypical lighting effects and on/off control:     Constant Brightness Lighting with directional or independent control.     Realistic Effects like Ditch lights, Mars lights, strobes, and many more     FX3 & Standard Function Qualifiers operate functions based on direction,     F0 on or off, direction and F0, and whether loco is moving.     FX3 effects optimized for selectable LED or lamp operation     Configurable FX3 Pulse Function available on all function outputs.     Function Remapping for custom function setup.     Master Light Switch turns off all lights & functions with one keystroke.     Advanced Consist Function Controls▪Digitrax LocoMotion® System-Your locomotives look like the real thing.     The Digitrax LocoMotion System makes them run like the real thing, too!     Torque Compensation for smooth as silk silent operation.     128 Speed Step operation (14 or 28 steps can also be used).     Momentum with acceleration and deceleration.     Normal Direction of Travel is user selectable.     Switching Speed feature for easier and faster access to yard speeds.     3 Step Speed Tables set start, mid and max voltage for custom control.     28 Step Speed Tables with 256 level resolution for precise control.▪Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.▪Series 6 Decoder Features.▪2 Digit and 4 Digit Addressing.▪Basic, Advanced & UniVersal Consisting.▪SuperSonic motor drive for silent operation.▪Direct mode programming.▪Decoder Reset CV with or without speed table reset.▪Transponder Equipped ready for transponding on your Layout.▪Motor Isolation Protection helps prevent damage to your decoder.▪DCC Compatible.▪FCC Part 15, Class B RFI compliant.▪Digitrax “No Worries” Warranty. Specifications Current Rating-Motor: 1.5/2.0 Amps Max Dimensions: .672” x 1.074” x .259” (17.08mm x 27.28mm x 6.6mm) Installation: DCC Medium Plug Long Harness (read more) Function Outputs: 2 (read more) Function Type: FX3 (read more) Features: Series 6 (read more) For Use With: PX112-2 Current Rating-Functions: 0.5 Amps total all functions Original Release Date: 02-04-2014 Warranty: No Worries Warranty (read more) More Information Item # DH126P Brand Digitrax Scale HO Scale MSRP 26.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Decoder Manual V2 (01/2014) / Specification Sheet

Read more less

Upgrade your HO scale locomotives with the Digitrax DH126MT. Equipped with a 21MTC interface, this decoder allows for smoother operation and increased data transfer. Perfect for serious model train enthusiasts looking for top-notch performance. Fits HO Scale Locomotives Equipped with 21MTC interface 1.5 Amp/2 Amp Peak 2 FX3 Functions, 0.5 Amp Series 6 Decoder Features. Works with PX112-2 Power Xtender. .805”x.64”x.17” 20.45mm x 16.26mm x 4.32mm More Information Item # DH126MT Brand Digitrax Scale HO Scale MSRP 27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals DH126MT Instruction Sheet / Specification Sheet

Read more less

By default, this decoder does not come with a pre-programmed Sound Profile. Nevertheless, we provide complimentary Sound File programming for all ESU decoders. Please be aware that opting for Sound File Programming in your order might result in a shipment delay of 1 to 2 business days. Visit this link to preview ESU Sounds 1.5A, NEM652 8-Pin Plug, 11x15mm Speaker and Enclosure Version The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Operating modes Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021. The M4 protocol supports the automatic registration on mfx® compatible central units. The LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts. Sound The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. Functions We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. Motor control Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types. LokSound 5 DCC The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. More Information Item # 58410 Brand ESU Scale HO & O WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

By default, this decoder does not come with a pre-programmed Sound Profile. Nevertheless, we provide complimentary Sound File programming for all ESU decoders. Please be aware that opting for Sound File Programming in your order might result in a shipment delay of 1 to 2 business days. Visit this link to preview ESU Sounds LokSound 5 Micro Sound and DCC Control Decoder - Next18 Plug Version The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types.  The LokSound 5 micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Please note the LokSound 5 DCC decoder does not come with a speaker. Operating modes The LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021. The M4 protocol supports the automatic registration on mfx® compatible central units. The LokSound  decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts. Sound The LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. Functions Despite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. Motor control Motor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications. LokSound 5 micro DCC The LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. More Information Item # 58828  Brand ESU Scale N & HO WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

While LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable. The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles. Modes The LokPilot 5 Basic is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center. It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255. The LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted. Functions The LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately. Motor The motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. Operational reliability On request, a PowerPack can be connected to the LokPilot 5 Basic to bridge dirty rail cuts. Protection Of course, all function outputs as well as the motor output are protected against overload. We want you to enjoy your decoder for as long as possible. More Information Item # 59029 Brand ESU Scale HO WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

The A6X is six function HO-scale "drop-in" style mobile decoder with integrated 1.5V power supply for Atlas, Athearn, Kato, etc. locomotives. Examples include the following:Athearn: F59PHI F3 Atlas: RS-1/RS-3/RS-11 C424 GP7 Kato: GP35 Back EMF Load Compensation:Provides superior slow speed control and high performance under load. Quiet Drive:Super-quiet motor control for "buzz" free motor performance. DC Mode:Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC. RailCom®:This feature allows the decoder to talk to the command station. RailCom supports expansion for new features. Variable Momentum:Allows you to make custom acceleration and deceleration curves. 1.5 Volt Power Supply:This product has an on-board 1.5 Volt power supply for use with 1.5 Volt bulbs without resistors. LED Support:This product does not require external resistors when connecting LED's. Incandescent Bulb Support:This decoder can be used with 12 Volt bulbs. Function Remapping:Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects:Choose from 20 separate user-programmable lighting effects! Dimmable Brightness:Configure multiple different brightness levels for your LED's or incandescent bulbs. Decoder Lock:Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible:Fully compatible with Airwire™ operation. User-Loadable Speed Tables:Configure custom speed curves and set speed limits. Specs Interface Type: Drop-In Dimensions (L x W x H): 2.85" x 0.682" x 0.155" or 72.39mm x 17.32mm x 3.94mm Scale: HO Scale Continuous/Peak: 1.0/2.0 Amp Total Functions: 6 Function Rating: 100 mA 12V Outputs: 6 LED Outputs: 6 1.5V Bulb Outputs: 6

Read more less