Digitrax
-
Digitrax Digitrax DH126PS | 1.5 Amp Economy Decoder with Digitrax Easy Connect 9 Pin to DCC Medium Plug 1.0” harness | HO Scale
As a product expert in the field of model trains, the Digitrax DH126PS is a top choice for HO scale enthusiasts. With a 1.5 amp economy decoder and Digitrax Easy Connect 9 pin, this decoder offers easy installation and optimal performance. Upgrade your layout with this highly efficient and reliable decoder. .672” x 1.074” x .259”17.08mm x 27.28mm x 6.6mm Digitrax Easy Connect 9 Pin Harness 1.5 Amp/2 Amp Peak Current Rating 2 FX3 Functions, 0.5 Amp Total Function Current Rating ▪FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control. Realistic Effects like Ditch lights, Mars lights, strobes, and many more FX3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving. FX3 effects optimized for selectable LED or lamp operation Configurable FX3 Pulse Function available on all function outputs. Function Remapping for custom function setup. Master Light Switch turns off all lights & functions with one keystroke. Advanced Consist Function Controls▪Digitrax LocoMotion® System-Your locomotives look like the real thing. The Digitrax LocoMotion System makes them run like the real thing, too! Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. Switching Speed feature for easier and faster access to yard speeds. 3 Step Speed Tables set start, mid and max voltage for custom control. 28 Step Speed Tables with 256 level resolution for precise control.▪Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.▪Series 6 Decoder Features.▪2 Digit and 4 Digit Addressing.▪Basic, Advanced & UniVersal Consisting.▪SuperSonic motor drive for silent operation.▪Direct mode programming.▪Decoder Reset CV with or without speed table reset.▪Transponder Equipped ready for transponding on your Layout.▪Motor Isolation Protection helps prevent damage to your decoder.▪DCC Compatible.▪FCC Part 15, Class B RFI compliant.▪Digitrax “No Worries” Warranty. Specifications Current Rating-Motor: 1.5/2.0 Amps Max Dimensions: .672” x 1.074” x .259” (17.08mm x 27.28mm x 6.6mm) Installation: DCC Medium Plug Long Harness (read more) Function Outputs: 2 (read more) Function Type: FX3 (read more) Features: Series 6 (read more) For Use With: PX112-2 Current Rating-Functions: 0.5 Amps total all functions Original Release Date: 02-04-2014 Warranty: No Worries Warranty (read more) More Information Item # DH126P Brand Digitrax Scale HO Scale MSRP 26.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Decoder Manual V2 (01/2014) / Specification Sheet
£15.56
-
Digitrax Digitrax DH126D | 1.5 Amp Economy Wired Mobile Decoder | HO Scale
Digitrax DH126D is the perfect solution for an economy HO scale wired mobile decoder. With a 1.5 amp capacity, this decoder offers reliable and efficient performance for HO scale model trains. Upgrade your model train experience with the Digitrax DH126D decoder. .672” x 1.074” x .259”17.08mm x 27.28mm x 6.6mm Digitrax Easy Connect 9 Pin Harness 1.5 Amp/2 Amp Peak Current Rating 2 FX3 Functions, 0.5 Amp Total Function Current Rating ▪FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control. Realistic Effects like Ditch lights, Mars lights, strobes, and many more FX3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving. FX3 effects optimized for selectable LED or lamp operation Configurable FX3 Pulse Function available on all function outputs. Function Remapping for custom function setup. Master Light Switch turns off all lights & functions with one keystroke. Advanced Consist Function Controls ▪Digitrax LocoMotion® System-Your locomotives look like the real thing. The Digitrax LocoMotion System makes them run like the real thing, too! Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. Switching Speed feature for easier and faster access to yard speeds. 3 Step Speed Tables set start, mid and max voltage for custom control. 28 Step Speed Tables with 256 level resolution for precise control. ▪Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.▪Series 6 Decoder Features.▪2 Digit and 4 Digit Addressing.▪Basic, Advanced & UniVersal Consisting.▪SuperSonic motor drive for silent operation.▪Direct mode programming.▪Decoder Reset CV with or without speed table reset.▪Transponder Equipped ready for transponding on your Layout.▪Motor Isolation Protection helps prevent damage to your decoder.▪DCC Compatible.▪FCC Part 15, Class B RFI compliant.▪Digitrax “No Worries” Warranty. Specifications Current Rating-Motor: 1.5/2.0 Amps Max Dimensions: .672” x 1.074” x .259” (17.08mm x 27.28mm x 6.6mm) Installation: Digitrax 9 pin to wires Function Outputs: 2 (read more) Function Type: FX3 (read more) Features: Series 6 (read more) For Use With: PX112-2 Current Rating-Functions: 0.5 Amps total all functions Original Release Date: 02-04-2014 Warranty: No Worries Warranty (read more) More Information Item # DH126D Brand Digitrax Scale HO Scale MSRP 23.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Decoder Manual V2 (01/2014) / Specification Sheet
£13.77
-
Digitrax Digitrax PS14 | AC/DC Adapter 14V DC 300ma
Power your Digitrax accessories with the reliable and efficient Digitrax PS14 AC/DC Adapter. Designed to provide a stable power supply, the PS14 is perfect for a wide range of Digitrax products, ensuring your model train setup runs smoothly and efficiently. Key Features: Versatile Power Supply: The PS14 provides 14V DC at 300ma, making it suitable for powering various Digitrax accessories such as the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91, UR92, and more. Universal AC Input: With an input range of 95-240V AC at 50/60Hz, the PS14 can be used worldwide, making it a versatile choice for model train enthusiasts everywhere. Compact and Lightweight: Weighing only 2 ounces, the PS14 is easy to handle and install. Its compact design ensures it fits neatly on a plug strip without taking up too much space. Stabilized Output: The PS14 provides a stabilized output, ensuring consistent performance and protecting your accessories from power fluctuations. Convenient Cable Length: The approximately 4-foot long cable offers flexibility in placement, allowing you to position your accessories exactly where you need them. Right Angle Connector: The 2.1 mm center positive connector is designed with a right angle, making it easy to connect in tight spaces. Power Indicator: A red LED power indicator lets you know when the adapter is on and functioning correctly. Why Choose the Digitrax PS14? The Digitrax PS14 is not just an adapter; it’s a reliable power solution for your model train accessories. Whether you’re a hobbyist looking to enhance your setup or a professional seeking dependable components, the PS14 offers the perfect balance of performance, versatility, and ease of use. Applications: Model Train Accessories: Ideal for powering a variety of Digitrax accessories, ensuring your model train layout operates smoothly. DIY Projects: Suitable for various DIY electronics projects that require a stable 14V DC power supply. Custom Installations: Perfect for custom model train installations where reliable power is essential. Specifications: Output Voltage: 14V DC Current Rating: 300ma Input Voltage: 95-240V AC, 50/60Hz Connector: 2.1 mm center positive, right angle Cable Length: Approximately 4 feet Weight: 2 ounces Enhance Your Model Train Experience Upgrade your model train setup with the Digitrax PS14 AC/DC Adapter. Its reliable performance, versatile compatibility, and user-friendly design make it the perfect choice for anyone looking to power their Digitrax accessories efficiently. More Information Item # PS14 Brand Digitrax MSRP $16.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Specification Sheet
£8.96
-
Digitrax Digitrax SP10188 | Oval 10mm x 18mm 8 Ohm Speaker | N & HO Scale
Enhance your model train experience with the Digitrax SP10188 Oval Speaker. Designed for both N and HO scale installations, this 10mm x 18mm 8 Ohm speaker delivers clear, high-quality sound for your locomotives. Compatible with current production SDN144A0, SDN144A1, and SDN144PS sound decoders, it ensures seamless integration and optimal performance. Key Features: Compact Design: Fits easily into many N and HO scale models. High-Quality Sound: Provides crisp and clear audio for an immersive experience. Versatile Compatibility: Works with SDN144A0, SDN144A1, and SDN144PS sound decoders. Easy Installation: Comes with wires for straightforward setup. Enhanced Performance: Digitrax recommends using a baffle or speaker surround to maximize sound output. Upgrade your model train setup with the Digitrax SP10188 speaker and enjoy the enhanced realism and enjoyment it brings to your layout. More Information Item # SP10188 Brand Digitrax Scale N & HO MSRP $10.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Specification Sheet
£5.98
-
Digitrax Digitrax SN2AB | Mainline Signaling Kit | N Scale
N scale Mainline Signaling Kit including: 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic N scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy mainline setup with A and B mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SN2AB Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£16.16
-
Digitrax Digitrax SNABC | Turnout Signaling Kit | N Scale
N scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic N scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy plant setup with A, B, and C mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SNABC Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£16.16
-
Digitrax Digitrax SHABC | Turnout Signaling Kit | HO Scale
HO scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic HO scale signal. Mounting board and hardware included. Current setting resistors are built in to the board. Easy plant setup with A, B, and C mast configurations. Pads are provided to make it easy to attach any signal to the mast base. This product is intended for use with the SE8C. The Digitrax Plug ‘N Play Signal Mast consists of a signal mast with one or two signal heads depending on mast configuration. Included with the kit are mounting boards and hardware that makes it easy to mount and connect the signal mast to the SE8C signal driver cable. This product is intended for use with the SE8C and other Digitrax signaling decoders. More Information Item # SHABC Brand Digitrax MSRP $27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£15.70
-
Digitrax Digitrax DH126P | 1.5 Amp Economy Decoder with Digitrax Easy Connect 9 Pin to DCC Medium Plug 3.0” harness | HO Scale
Increase the power and functionality of your HO scale model trains with the Digitrax DH126P decoder. With a 1.5 amp capacity and Digitrax Easy Connect 9 Pin to DCC Medium Plug 3.0" harness, this decoder allows for smoother and more accurate locomotive control. Upgrade your layout today. .672” x 1.074” x .259”17.08mm x 27.28mm x 6.6mm Digitrax Easy Connect 9 Pin Harness 1.5 Amp/2 Amp Peak Current Rating 2 FX3 Functions, 0.5 Amp Total Function Current Rating ▪FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control. Realistic Effects like Ditch lights, Mars lights, strobes, and many more FX3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving. FX3 effects optimized for selectable LED or lamp operation Configurable FX3 Pulse Function available on all function outputs. Function Remapping for custom function setup. Master Light Switch turns off all lights & functions with one keystroke. Advanced Consist Function Controls▪Digitrax LocoMotion® System-Your locomotives look like the real thing. The Digitrax LocoMotion System makes them run like the real thing, too! Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. Switching Speed feature for easier and faster access to yard speeds. 3 Step Speed Tables set start, mid and max voltage for custom control. 28 Step Speed Tables with 256 level resolution for precise control.▪Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.▪Series 6 Decoder Features.▪2 Digit and 4 Digit Addressing.▪Basic, Advanced & UniVersal Consisting.▪SuperSonic motor drive for silent operation.▪Direct mode programming.▪Decoder Reset CV with or without speed table reset.▪Transponder Equipped ready for transponding on your Layout.▪Motor Isolation Protection helps prevent damage to your decoder.▪DCC Compatible.▪FCC Part 15, Class B RFI compliant.▪Digitrax “No Worries” Warranty. Specifications Current Rating-Motor: 1.5/2.0 Amps Max Dimensions: .672” x 1.074” x .259” (17.08mm x 27.28mm x 6.6mm) Installation: DCC Medium Plug Long Harness (read more) Function Outputs: 2 (read more) Function Type: FX3 (read more) Features: Series 6 (read more) For Use With: PX112-2 Current Rating-Functions: 0.5 Amps total all functions Original Release Date: 02-04-2014 Warranty: No Worries Warranty (read more) More Information Item # DH126P Brand Digitrax Scale HO Scale MSRP 26.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet / Decoder Manual V2 (01/2014) / Specification Sheet
£15.56
-
Digitrax Digitrax DH126MT | Locomotives Equipped with 21MTC interface | HO Scale
Upgrade your HO scale locomotives with the Digitrax DH126MT. Equipped with a 21MTC interface, this decoder allows for smoother operation and increased data transfer. Perfect for serious model train enthusiasts looking for top-notch performance. Fits HO Scale Locomotives Equipped with 21MTC interface 1.5 Amp/2 Amp Peak 2 FX3 Functions, 0.5 Amp Series 6 Decoder Features. Works with PX112-2 Power Xtender. .805”x.64”x.17” 20.45mm x 16.26mm x 4.32mm More Information Item # DH126MT Brand Digitrax Scale HO Scale MSRP 27.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals DH126MT Instruction Sheet / Specification Sheet
£16.16
-
Digitrax Digitrax SDXN147A0 | Series 7 Sound and DCC Control Decoder | N Scale
Experience the ultimate control with the Digitrax SDXN147A0 Series 7 Sound and DCC Control Decoder. Enjoy top-of-the-line sound and precision control for your N scale model trains. With advanced features and reliable performance, this decoder will bring your layout to life. Upgrade your experience today. Fits many Atlas N locomotives Mobile Decoder with SoundFX 8 Ohm 9x18x4 mm oval speaker 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output More Information Item # SDXN147A0 Brand Digitrax Scale N MSRP $88.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£50.87
-
Digitrax Digitrax BP600MH | Battery Pack for DT602 Series Throttles
Increase your mobility with the Digitrax BP600MH battery pack for DT602 Series Throttles. Featuring a long-lasting rechargeable battery, this pack allows you to control your train layout without being tethered to an outlet. Say goodbye to cords and hello to convenience with the Digitrax BP600MH. Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works with DT602 Family of throttles. More Information Item # BP600MH Brand Digitrax Scale N/A MSRP $13.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£7.47
-
Digitrax Digitrax RX4 | Block Transponding Receivers
The RX4 is a 4 zone transponder detector for use with Digitrax occupancy detection systems. The RX4 enables you to not only see what blocks are occupied but also identifies what is there. RX4 Features: Know the layout zone location of transponder-equipped locos and rolling rolling stock Each RX4 handles 4 transponding zones Low current pulses wont interfere with DCC decoders or other track signals Can be used in conjunction with other means of occupancy detection to customize your layout's feedback system Works with most DCC compatible systems Can be adapted to work with other command control systems as well Location and identification information is updated continuously on LocoNet Location Information can be configured to be displayed on a track diagram No modification of existing equipment required, just add the transponding components and you're ready to go. More features than any other method of "bi-directional" communication. Note: RX4s must be used in conjunction with a Digitrax BDL16 series occupancy detector to function. More Information Item # RX4 Brand Digitrax Scale N/A MSRP $54.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet, BDL168/RX4 Worksheet, Transponding with BDL168 & RX4 App Note, Specification Sheet
£31.41
