Gift Ideas Under $100.00
SoundTraxx SoundTraxx 882004 | Econami ECO-PNP Diesel (2-amp) Digital Sound Decoder
The 2-amp Econami ECO-PNP universal-style Digital Sound Decoder is suitable for a wide variety of models from HO to S scale. This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Diesel Dimensions: 74 x 17 x 5mm Max. Motor Stall Current: 2A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 12
£52.54
SoundTraxx SoundTraxx 810140 | CurrentKeeper™
The SoundTraxx CurrentKeeper™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet. It measures 40 x 6 x 11mm.
£20.38
SoundTraxx SoundTraxx 810160 | CurrentKeeperII | Multi Scale
Introducing the More Compact CurrentKeeperII! Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make your installs easier! Keep more of your trains running even over dirty track and switches! The NEW SoundTraxx CurrentKeeperII™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet. It measures 20.1 x 13.2 x 11mm. ● Maintains power to the decoder for up to 6 seconds during electrical interruptions● Compatible with NMRA DCC Standards & Recommended Practices
£20.38
Squeaky's Trains Squeaky's Trains #43 | HO Scale Rerailer | 2 Pack
3D Printed HO Scale Rerailer’s uniquely created by Squeaky’s Trains & Things. Condition: New Quantity: 2 Pack, long and short rerailers. Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Scale: HO Scale (Long) Length: 8.85″ / 22.5cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Scale: HO Scale (Short) Length: 5.83″ / 14.8cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Notes: Logo sign, rails and Freight Car not included.
£3.08
Atlas Model Railroad Co. Atlas 170 | Code 100 & 83 Rail Joiners 48 Pack Nickel Silver | HO Scale
The Atlas 170 | Code 100 & 83 Rail Joiners 48 Pack provides a reliable way to join nickel silver rails on HO scale tracks. With a quantity of 48 pack, it offers cost-effectiveness and convenience for multiple track connections. Perfect for model train enthusiasts and professionals. Code 100 & 83 HO Scale Nickel Silver 48 Pack
£2.78
SoundTraxx SoundTraxx 810154 | Mini Cube Oval Speaker/Baffle | HO Scale
This tiny speaker comes with a properly proportioned speaker enclosure and provides great results for space-constrained models! Dimensions: 16 x 12 x 11.3mm(D)Frequency Response: 300Hz – 20kHzPower: .7 Watts (Nominal) 1 Watt (Peak)Impedance: 8 Ohms Note: When using this speaker with a decoder that has a two watt amplifier, it must be wired in series with another 1 watt speaker.
£9.86
SoundTraxx SoundTraxx 810153 | 28mm (1″) 8-ohm, 2 Watt Round Speaker
Suitable for many HO and larger models. Dimensions: 28 x 4.5mm(D)Frequency Response: 320 Hz – 18kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms
£8.01
NixTrainz NixTrainz Decoder Buddy V5B | 8 Outputs & LED Ready
The NixTrainz Decoder Buddy V5B (2.2K Ohm, 8 Outputs) offers versatile mounting options, replacing QSI or Dual Mode decoder boards with ease. This mother board includes a dedicated pad for the white control wire of the Power Pack, positioned for effortless soldering. Ideal for LED lighting, it ensures simplified connections for model train enthusiasts. Note: Requires 21 Pin Decoder and soldering. Dimensions: 0.67" x 2.20" x 0.35".
£9.27
NixTrainz NixTrainz | Decoder Buddy Mini (1k Ohm Resistors Onboard)
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM. The mother board includes: One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".) It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!! The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation. Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)
£8.50
SoundTraxx SoundTraxx 885813 | TSU-PNP8 8 Function – Tsunami2 (2-amp) EMD Diesel Sound Decoder
The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.
£76.04
Squeaky's Trains Squeaky's Trains | Temporary Concrete Barriers | HO Scale
Squeaky’s Trains – HO Scale – “Jersey” Concrete Traffic Barriers Our “Jersey” Temporary Concrete Barriers are HO scale accurate, 100% exclusive and only available from Squeaky’s Trains. Each and every barrier goes through an inspection to insure the best quality possible. Condition: New Scale: HO Scale Accurate Sizes Length: See Size Options Height: 0.35″ / 9.0mm Width: 0.31″ / 8.0mm Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Finish/Color: Unpainted, gray. Notes: Vehicles, coin, or other props not included. Looking to purchase in bulk? Contact us for pricing.
£3.84 - £9.25
Bowser Trains Bowser Trains 22 | Foam Work Cradle | Locomotive & Freight Car Tool | HO Scale
The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For HO Scale models Dimensions: 6"w x 11"
£9.27