This bundle of N-Scale Just Plug® Work Vehicles fills up one Light Hub (included). Each 40s/50s style Vehicle includes a driver, LED headlights and taillights. These Vehicles have custom colors only available in the Value Packs. Give the illusion of movement on your layouts with Just Plug® Vehicles. Bulk up on savings over buying individually with Value Packs. Pair with Just Plug® Traffic Lights and Just Plug Street Lights. Includes:  1 Police Car 1 Work Truck 1 Green Pickup 1 Henry Hauler 4 Linker Plugs 1 Light Hub CTRL Port Plug (installed) 1 Double-sided Mounting Tape 2 Mounting Screws Illustrated Instructions   More Information Item # JP5918 Brand Woodland Scenics Scale N MSRP $119.99  

Read more less

The LokSound by ESU LED Interior Lighting Strips are perfect for lighting HO and N Scale passenger car interiors operating on DCC layouts. They're designed for use only on track power (electrical wipers and accessories available separately). Offered with warm white (397-50708) or yellow (397-50709) LEDs they allow you to match your lighting color to your modeling era. The strips include a small potentiometer so you can adjust the brightness. For shorter cars or cabooses the strips can be cut. The red marker LEDs are on wire leads for easy placement where needed. The integral ESU decoder supports both Motorola(R) and DCC, and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows you to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. All effects can also be programmed once the lighting strip has been installed and the values of your DCC LED Interior Lighting Strips can be read on a programming track. Yellow 10 x 11/32" or 25.5 x .9cm More Information Item # 50709 Brand ESU Scale O, HO, TT, N Pack Size 1 MSRP $29.99 WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less

This bundle of N- Scale Just Plug® Wooden Pole and Double Lamp Post Street Lights fills up one Light Hub (included). This variety pack of Streetlights fit all scenes on your layout, from busy downtowns to rural areas. Installation is as simple as drilling a hole and feeding the wires. LED Lights are warm white and include a Linker Plug. Bulk up on savings over buying individually with Value Packs. 12 Street Lights are ideal to add lighting to your entire layout! Includes:  12 Warm White LED Street Lights with 36" wire 6 Wooden Pole Street Lights 6 Double Lamp Post Street Lights 4 Linker Plugs 1 Light Hub CTRL Port Plug (installed) 1 Double-sided Mounting Tape 2 Mounting Screws Illustrated Instructions   More Information Item # JP5914 Brand Woodland Scenics Scale N Pack Size 12 MSRP $109.99

Read more less

Show off your patriotism with Old Glory waving in the wind. US Flag - Wall Mounts are available in three sizes and work for multiple scales. They feature a United States flag hanging from a metal pole and a mounting bracket. Display your flag outside your home, church, small business, or on the buildings down Main Street. US Flags include a Just Plug Spotlight to highlight the Flag. Each spotlight is designed and ready to plug into the Just Plug Light Hub. Includes:  1 Large Wall Mount Flag Pole with Flag 2 Medium Wall Mount Flag Poles with Flag 1 Small Wall Mount Flag Pole with Flag 1 Large Spotlight with 36" wire 3 Small Spotlights with 36" wire 4 Linker Plugs 1 Light Hub CTRL Port Plug (installed) 1 Double-sided Mounting Tape 2 Mounting Screws Illustrated Instructions   More Information Item # JP5924 Brand Woodland Scenics Scale N, HO, O Pack Size 4 MSRP $59.99

Read more less

Show off your patriotism with Old Glory waving in the wind. US Flag - Poles are available in three sizes and work for multiple scales. They feature a United States flag high on a flag pole. The pole is topped with a ball-style finial and includes a rope and cleat. Display your flag outside large businesses, government buildings, schools and more. US Flags include a Just Plug Spotlight to highlight the Flag. Each spotlight is designed and ready to plug into the Just Plug Light Hub. Includes:  1 Large Flag Pole with Flag 2 Medium Flag Poles with Flag 1 Small Flag Pole with Flag 1 Large Spotlight with 36" wire 3 Small Spotlights with 36" wire 4 Linker Plugs 1 Light Hub CTRL Port Plug (installed) 1 Double-sided Mounting Tape 2 Mounting Screws Illustrated Instructions   More Information Item # JP5925 Brand Woodland Scenics Scale N, HO, O Pack Size 4 MSRP $64.99

Read more less

Get ready to hit the short track with the AMT 1450 Dodge Dart Sportsman model kit! This 1/25 scale plastic model kit is perfect for hobbyists who love the thrill of stock car racing. Key Features: Authentic Design: Features a Tobias tubular chassis with a full roll cage, Frankland quick-change rear end, and an ATL fuel cell for a realistic build. Detailed Parts: Includes a highly detailed engine, interior, and suspension components to bring your model to life. High-Quality Decals: Comes with vibrant, waterslide decals to give your model an authentic racing look. Skill Level: Suitable for skill level 2 builders, requiring paint and glue (not included). Parts Count: Contains 100+ parts, molded in white, clear, and chrome-plated pieces, with black vinyl tires and a metal axle. Dimensions: Once assembled, the model measures approximately 7.5 inches in length. Whether you’re a seasoned modeler or just starting out, the AMT Dodge Dart Sportsman Short Track model kit is a fantastic addition to your collection. Order yours today and bring the excitement of the racetrack to your home! More Information Item # 1450 Brand AMT Scale 1/25 Kit Type Plastic Model Kit Parts 100+ pieces Skill Level Skill level 2 Dimensions 7.5 inches in length. MSRP $36.99

Read more less

Enhance your HO railroad with the Walthers Cornerstone 933-4108 Modern Furniture Factory kit. This detailed structure is ideal for both standalone or integrated industrial layouts, and includes: - Contemporary design adaptable to various industries - Typical steel construction from the 1970s to the present - Two-story main building with front office, truck, and rail car loading/unloading areas - Separate lumber storage building with interior racks - Large dust/sawdust collector - Parts to build detailed electrical transformer, vents, and four rooftop air conditioners - Separate doors and windows - Molded in Light Ivory, Concrete, Medium Gray, and Light Gray, with clear acetate Dimensions: - Main Building: 15-3/8 x 10-1/2 x 4-1/2" (39 x 26.9 x 11.3cm) - Lumber Storage Shed: 9-3/4 x 4-1/2 x 2-3/4" (24.6 x 11.4 x 6.9cm) - Dust Collector: 1-5/8 x 1-5/8 x 5-3/16" (4.1 x 4.1 x 13.1cm)

Read more less

These Micro Trains Line train cars provide a realistic and detailed addition to your N scale collection. With a 100-ton capacity, 3-bay ribside design and graffiti detailing, these cars are perfect for adding variety to your model train layout. The included foam load adds a touch of authenticity to your scenes. Comes with Foam Insert) More Information Item # 993 05 034 Brand Micro Trains Line Scale N Type 100-Ton 3-Bay Ribside Open Hopper Road Name Squaw Creek Coak AEX Road Numbers 4420, 4421 Release Date February 2023 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell

Read more less

PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features: One time run of these roadnumbers - order now, limiyted quantity available! Detailed body with chopped nose Based on Phase II units rebuilt in the 1960s by many owners Scale width hood with correct contours With or without dynamic brakes as appropriate See-through steps Correct RP-25 metal wheels Available with ESU Sound and DCC for DCC or DC layouts featuring: 4 function outputs with brightness control by CV Fully DCC compatible 14, 28 or 128 speed steps Dual mode DC and DCC 4 Airhorns changeable by CVs 2 bells changeable by CVs Full 8-notch prime mover sounds Compressor Dynamic brake Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell

Read more less

WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell

Read more less

WalthersMainline takes the hard work out of modeling one of the most popular prototype diesels ever, with the EMD GP9 Phase II (sometimes referred to as the Phase 2) with Chopped Short Hood in HO Scale! Typical of railroad rebuilds from the 1960s on that are still going strong today, they're nicely detailed, and equipped with the proven power of a WalthersProto(R) drive. Perfect for railroads big or small the WalthersMainline EMD GP9 Phase II with Chopped Short Hood features: One of the most widely used diesels ever - based on Phase II units rebuilt for improved forward visibility and in service from the 1960s to present Limited edition - one time run of these roadnumbers! Scale width hood with correct contours See-through steps Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14 to 1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Machined brass flywheel Heavy die-cast metal chassis Constant and directional LED headlights 21-pin DCC plug Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately) Additional information on DCC functions:ESU CV ListESU Function MappingESU Function Output Alternate horns and bells can be programmed on the sound decoder using these CVs: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco single-chime CV163 = 2 - Nathan M3 CV163 = 3 - Leslie S3L Bells: CV164 = 0 - Bronze bell (default) CV164 = 1 - Steel bell

Read more less