Gift Ideas Under $50.00
SoundTraxx SoundTraxx 810140 | CurrentKeeper™
The SoundTraxx CurrentKeeper™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet. It measures 40 x 6 x 11mm.
£20.52
Woodland Scenics Woodland Scenics 639 | Static King Static Grass Applicator - Field System | Multi Scale
Static King makes it easy to model large grassy areas and ensures Static Grass is applied vertically. The Static King has an ergonomic design and can be placed upside down for easy filling. It comes with different Sieve sizes for creating a varied effect using 2-12 mm lengths of Static Grass. A divider allows the use of multiple colors and sizes at the same time for modeling realistic fields and other tall grasses. The clear hopper ensures you always know how much Static Grass you have left. Built-in bleed-off function allows it to discharge safely on its own. Power is supplied via a Power Supply or battery. Indicator light makes it easy to know if the Static King is turned on. Batteries and/or power supply not included, available as Add-On.
£52.54 - £66.03
Squeaky's Trains Squeaky's Trains #43 | HO Scale Rerailer | 2 Pack
3D Printed HO Scale Rerailer’s uniquely created by Squeaky’s Trains & Things. Condition: New Quantity: 2 Pack, long and short rerailers. Design: Exclusive 3D model designed by Squeaky’s Trains Manufacture: 3D printed with high quality materials Scale: HO Scale (Long) Length: 8.85″ / 22.5cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Scale: HO Scale (Short) Length: 5.83″ / 14.8cm Width: 1.23″ / 31.4mm Height: 0.40″ / 10mm Notes: Logo sign, rails and Freight Car not included.
£3.10
Atlas Model Railroad Co. Atlas 170 | Code 100 & 83 Rail Joiners 48 Pack Nickel Silver | HO Scale
The Atlas 170 | Code 100 & 83 Rail Joiners 48 Pack provides a reliable way to join nickel silver rails on HO scale tracks. With a quantity of 48 pack, it offers cost-effectiveness and convenience for multiple track connections. Perfect for model train enthusiasts and professionals. Code 100 & 83 HO Scale Nickel Silver 48 Pack
£2.79
SoundTraxx SoundTraxx 810154 | Mini Cube Oval Speaker/Baffle | HO Scale
This tiny speaker comes with a properly proportioned speaker enclosure and provides great results for space-constrained models! Dimensions: 16 x 12 x 11.3mm(D)Frequency Response: 300Hz – 20kHzPower: .7 Watts (Nominal) 1 Watt (Peak)Impedance: 8 Ohms Note: When using this speaker with a decoder that has a two watt amplifier, it must be wired in series with another 1 watt speaker.
£9.93
SoundTraxx SoundTraxx 810153 | 28mm (1″) 8-ohm, 2 Watt Round Speaker
Suitable for many HO and larger models. Dimensions: 28 x 4.5mm(D)Frequency Response: 320 Hz – 18kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms
£8.06
NixTrainz NixTrainz Decoder Buddy V5B | 8 Outputs & LED Ready
The NixTrainz Decoder Buddy V5B (2.2K Ohm, 8 Outputs) offers versatile mounting options, replacing QSI or Dual Mode decoder boards with ease. This mother board includes a dedicated pad for the white control wire of the Power Pack, positioned for effortless soldering. Ideal for LED lighting, it ensures simplified connections for model train enthusiasts. Note: Requires 21 Pin Decoder and soldering. Dimensions: 0.67" x 2.20" x 0.35".
£9.33
NixTrainz NixTrainz | Decoder Buddy Mini (1k Ohm Resistors Onboard)
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM. The mother board includes: One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".) It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!! The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation. Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)
£8.55
Bowser Trains Bowser Trains 22 | Foam Work Cradle | Locomotive & Freight Car Tool | HO Scale
The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For HO Scale models Dimensions: 6"w x 11"
£9.33
Squeaky's Trains Squeaky's Trains | 18″ Traffic/Construction Cones | HO Scale
Hand Crafted 18″ Construction Cones uniquely created by Squeaky’s Trains & Things. 10 Pack 3D printed with high quality materials. HO Scale Size: 0.19″ / 5.0mm (1:87) Hand painted, each cone is unique. Unpainted version also available. Notes: Vehicle Not Included. Unpainted or un-finished 3D printed models may come in any base color that was available for use at the time of printing. Base color requests are accepted but not always possible to fulfill. Please, no returns or refunds for base color reasons.
£0.12 - £1.55
Woodland Scenics Woodland Scenics 619 | Static Grass Light Green 4mm
Static Grass 42 grams Grass length: 4mm
£3.50£3.14
Woodland Scenics Woodland Scenics 641 | Field System™ Power Supply | Multi Scale
Supply power to your Static King 639 with the Woodland Scenics 641 Field System™ Power Supply. This power supply is a reliable source of energy for your Static King to run smoothly, making it the perfect addition to your collection. Optimizes Static King performance.
£11.12
