Out of Stock

This small oval speaker is ideal for narrow hood diesels. Dimensions: 35 x 16 x 8mm(D)Frequency Response: 250Hz – 13kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

Read more less

The Econami ECO-21PNEM 1-amp Digital Sound Decoder simply plugs into models equipped with an NEM-supported 21-pin socket. The ECO-21PNEM can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Diesel Dimensions: 30.5 x 15.5 x 6.55mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 12

Read more less

HO-scale, 4-function decoder that measures 25.1 x 15.6 x 4.7mm. This decoder has a 21-pin connector arranged according to the NMRA Standard that easily plugs into the factory-installed PCB of many models. This decoder will operate in DCC only. Dimensions: 25.1 x 15.6 x 4.7mm  Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 4 DCC Track Voltage: 21 Volts Maximum

Read more less

The Model-Vac is the perfect strength for picking up loose landscaping material but still leaves glued items behind. This cordless modeling vacuum features an ergonomic design and can access small areas. The Model-Vac is easy to empty and does not cause damage to excess material so it can be used again. Batteries not included.

Read more less

Plug this USB module into your PC (Personal Computer) to add Direct Radio to your computer so you can control and setup RailPro products like the RailPro locomotive modules!You can use a CI-1 and a PC to get started with RailPro for a lower cost! You can buy a real RailPro handheld controller at a later time.PC Requirements: Windows 10, Windows 8, Windows 7, and Vista. Product Specifications: Interface: USB-A Dimensions: 1.87 x 0.78 x 0.34 in   Download the CI-1 Software Here!  

Read more less

The HC-3-SUN with an Extra Bright Screen for use in outdoor environments and sunlight, is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features. Product Specifications: Dimensions: 6.1 x 3.4 x 1.5 in   Simply touch the screen to take control of a locomotive or accessory, adjust settings and much more!Direct Radio allows RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your commands. Also, Direct Radio has two-way communication that allows your HC-3 to transmit and receive information!Setting up your RailPro system is easy. When you buy new RailPro Ready products, or new RailPro modules for locomotives and accessories, simply press the “Find Product” button and the HC-3 will automatically load a picture of the product. You can take control of the product by touching the picture of the product!With a couple touches on the screen, you can link multiple locomotives together for more pulling power! With one more touch, you can unlink the locomotives. Our Direct Radio technology allows the locomotives to communicate together to ensure each locomotive pulls its share of the load.Multiple HC-3’s can be used at the same time to allow additional family and friends to enjoy your model layout! Also, multiple locomotives and other accessories can be used simultaneously for complete model layout control!The HC-3 comes complete with built in rechargeable batteries. The HC-3 is equipped with USB port to connect to a PC. You can go to Ring Engineering’s Internet site and download new pictures, sounds, and even new programs to add more functionality to your RailPro system. You do not need a computer to use the HC-3, but this can prove to be a very useful feature.

Read more less

The LM-3S is a module that you can install into a model train locomotive so the locomotive can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller with a Color Touch Screen! After the LM-3S is installed in a locomotive, you will be able to control the locomotive speed, direction, up to 6 light outputs and sounds! The LM-3S has “Direct Radio” (RF transceiver) built inside. The built in RF module allows commands and data to be sent and received to and from the module. You can load a picture of your choice into the LM-3S module. Then you will be able to touch the screen of the HC-2 to take control of your locomotive! You can even download new sounds and light effects using the built in Direct Radio!The LM-3S is electrically compatible with the DCC plug found in many locomotives to promote easy installation. Product Specifications: Sound Profile: Universal (all) Dimensions: 1.50 x 0.68 x 0.25 in DCC Track Voltage: 7.5V – 18V Light Outputs 6   The LM-3 is equipped with Direct Radio! This allows Ring Engineering Controlling Devices such as the HC-2, Handheld Controller with Color Touch screen, to control and configure your locomotive by sending and receiving data directly to the LM-3 through the air by use of RF transmission! The Direct Radio is very fast giving your locomotive quick response to your controls. Further, a controlling device can detect your LM-3 with just a few touches on the screen. Because of Direct Radio, you can load a picture of your locomotive to the LM-3! You can also load Light Effects and much more!Radio Load Sharing is a truly an innovative invention from Ring Engineering. It allows your locomotives that are linked together (sometimes called Consisted or MU'ed) to actually share pulling power. Only RailPro equipped locomotives use Direct Radio to talk to each other to be sure each locomotive pulls its share of the load! Even more amazingly, Ring Engineering's patent pending process only takes seconds to setup!Six light outputs. Can be configured for multiple light effects on a single output including On/Off, Dim, Ditch, Mars, Strobe, and more! Additional light effects can be loaded using DirectRadio!Built in protection with fault reporting by Direct Radio!Tiny size 1.50 x 0.68 x 0.25 Inches for easy fit.

Read more less

Brand: JT's Mega Steam Scent: Coal-Fired Steamer Size: 2 Oz Glass Bottle with Eye Dropper Made in the USA

Read more less

No more tedious wheel cleaning! Clean locomotives and rolling stock wheels quickly, without scratching. Roto Wheel Cleaner cleans all wheels at once and quickly. Power from transformer or track, the Wheel Cleaner works with both analog (DC) and digital (DCC) control systems. HO scale Roto Wheel Cleaner will accommodate locomotives up to 12" (30.5 cm) and rolling stock up to 10 1/4" (26.0 cm). RoHs Compliant

Read more less

Extension Wire is Just Plug-compatible and has soft insulation for easy stripping. Paired wire is color-coded for proper connection with Splicer Plugs and Extension Cable Kit.

Read more less

The sample test kit contains a variety of sample couplers and other necessary components to identify and properly install Kadee® couplers on locomotives & rolling stock. Without having to purchase full size packages of Couplers, Gear Boxes & Adaptors, Springs, Washers, & Shims that may be necessary for the Coupler Conversions.Contains: HO-Scale Conversion list, 20 & 30 Series Instructions, Whisker Coupler Instructions & sample size packages of products listed below.Couplers - MetalNO.5® Medium Centerset - Metal - One Pair141 Whisker® Long Underset - Metal - One Pair142 Whisker® Medium Overset - Metal - One Pair143 Whisker® Short Centerset - Metal - One Pair144 Whisker® Short Underset - Metal - One Pair145 Whisker® Short Overset - Metal - One Pair146 Whisker® Long Centerset - Metal - One Pair147 Whisker® Medium Underset - Metal - One Pair148 Whisker® Medium Centerset - Metal - One Pair149 Whisker® Long Overset - Metal - One Pair158 Whisker® "Scale" Medium Centerset - Metal - One PairCouplers - Plastic21/31 Long Underset - Plastic - One Pair22/32 Medium Overset - Plastic - One Pair23/33 Short Centerset - Plastic - One Pair24/34 Short Underset - Plastic - One Pair25/35 Short Overset - Plastic - One Pair26/36 Long Centerset - Plastic - One Pair27/37 Medium Underset - Plastic - One Pair28/38 Medium Centerset - Plastic - One Pair29/39 Long Overset - Plastic - One PairGear Boxes & Adaptors212 Talgo Truck Adaptors: - One SprueWork with all Couplers included in Test Kit and are standard with 20-Series couplers.213 20-Series Gear Box with Sleeves: - One SprueWork with all Couplers included in Test Kit and are standard with 20-Series couplers.232 NO.5® Type Gear Box: - One SprueWork with all Couplers included in Test Kit and are standard with NO.5® couplers & 20-Series couplers.233 30-Series Gear Box: - One SprueWork with all Couplers included in Test Kit Except Whisker® Couplers and are standard with 30-Series couplers.234 Short NO.5® Type Gear Box: - One SprueWork with all Couplers included in Test Kit and are standard with short shank 20-Series & 40-Series couplers.242 Whisker® Snap-Together Gear Box: - One SprueWork with all Couplers included in Test Kit and are standard with Whisker® couplers.252 Small Whisker® Snap-Together Gear Box: - One SprueWork with Only Whisker® Couplers. The 252 is the Whisker® equivalent to the 30-Series Gear Box.Screws, Springs, Washers, & Shims208 .015" Red Fiber Washer - 10 Each209 .010" Gray Fiber Washer - 10 Each211 .010" & .015" Shims - 10 Each256 Plastic 2-56 x 1/2" Screws - 10 Each621 30-Series Torsion Spring - 10 Each622 Knuckle Springs - 10 Each634 NO.5® Type Centering Spring - 10 EachUncouplers321 Code 100 Between-The-Rails - One Pair322 Code 83 Between-The-Rails - One PairTools231 Greas-em - One Each206 Coupler Height Gauge - One Each241 Dual Tool - One Each HO-Scale

Read more less

Foliage is excellent for making trees, vines, weeds, bushes or any low growth. Simply stretch the sheet of Foliage for a thin, lacy application. Attach to layout with Scenic Cement™. Create quick and economical tree masses on your layout. Stretch Foliage to desired density, then roll into a loose ball. Stretch the ball into a conical shape for variation. Attach to hillsides with Scenic Glue™. Model vines, weeds, low growth and trees Blends naturally with other foliage Colorfast For any scale 72 in3 (464 cm3)

Read more less