These single-door boxcars with Roller Bearing trucks were used in general service by CSX. CSX was formed through the 1986 mergers of Chessie System and Seaboard System/ Family Lines, and continues to operate today across more than 21,000 miles of track in the Eastern United States. More Information Item # 983 00 220 Brand Micro Trains Line Scale N Type 50' Boxcar with 10' Door, No Roofwalk Road Name CSX Road Numbers 143237, 143247, 143225, 143212 Release Date February 2024 MSRP 134.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

These flat cars have been specially modified to carry concrete railroad ties in Maintenance of Way trains for Amtrak. The car has a unique on-deck rail system to allow a gantry crane to traverse the cars to unload ties trackside. Founded in 1971, Amtrak is the largest North American passenger rail network serving more than 500 destinations in 46 states across 600 miles of track. More Information Item # 064 00 500 Brand Micro Trains Line Scale N Type Concrete Tie Rolling Gantry Flatcar Road Name Amtrak Road Numbers 15552 Release Date February 2024 MSRP 39.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This ice reefer with Bettendorf trucks was leased to the Kansas Egg & Poultry Company (the “Sunflower Brand”) of Hillsboro, Kansas. North American Despatch was founded in the early 1900s and was headquartered in Chicago, Illinois, primarily leasing tank cars and refrigerator cars. More Information Item # 058 00 602 Brand Micro Trains Line Scale N Type 36' Wood-Sheathed Ice Reefer Road Name Kansas Egg & Poultry Co. Road Numbers 3520 Release Date February 2024 MSRP 29.95 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This 40’ boxcar with Bettendorf trucks was built in 1966 and was class Bx-115. It was primarily used to haul grain. Founded in 1859, Santa Fe was one of the largest railroads in North America up until 1996, when it merged with Burlington Northern to form BNSF. More Information Item # 074 00 190 Brand Micro Trains Line Scale N Type 40' Plug-Door Boxcar No Roofwalk Road Name Santa Fe Road Numbers 22222 Release Date February 2024 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This ready-to-run N Scale 40' Single-Door Boxcar from Micro-Trains features an injection-molded styrene body, a die cast underframe, free-rolling Delrin(R) trucks with contoured axles and truck-mounted Magne-Matic(R) magnetic knuckle couplers. Other features include detailed separate fine-profile foot stirrups and a thin-profile roofwalk. Patterned after cars built from the 1940s into the 1960s, this 40' Single-Door Boxcars is an ideal addition to late steam and 1980s or earlier diesel-era freight consist.  More Information Item # 020 00 387 Brand Micro Trains Line Scale N Type 40' Single-Door Boxcar Road Name Seaboard Air Line Road Numbers 25303 Release Date February 2024 WARNING: This product can expose you to chemicals including Bisphenal A which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

By default, this decoder does not come with a pre-programmed Sound Profile. Nevertheless, we provide complimentary Sound File programming for all ESU decoders. Please be aware that opting for Sound File Programming in your order might result in a shipment delay of 1 to 2 business days. Visit this link to preview ESU Sounds 1.5A, NEM652 8-Pin Plug, 11x15mm Speaker and Enclosure Version The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any H0 or 0 gauge locomotive. LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure. The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Operating modes Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021. The M4 protocol supports the automatic registration on mfx® compatible central units. The LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts. Sound The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. Functions We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it.  Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers. Motor control Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types. LokSound 5 DCC The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. More Information Item # 58410 Brand ESU Scale HO & O WARNING: This product can expose you to a chemical, which is known to the State of California to cause Cancer and Reproductive Harm - For more information go to www.P65Warnings.ca.gov

Read more less