Zephyr Express gives you simple to use Digitrax Complete Train Control for a great price.  It offers simplified advanced train operation for any size layout and is fully expandable.  You won’t have to start over when you want to do more with your railroad. Zephyr Express Set Includes: DCS52 All-In-One Throttle/Command Station/Booster to run your layout PS314 Power supply to provide power to run your DCS52 Zephyr Express Quickstart Guide Zephyr Express Manual   Zephyr Express Offers: Cost effective entry level LocoNet Compatible system Color 2.4” LCD Screen. Large Backlit Keypad. Speed control knob and direction switch with brake. Integrated USB Computer Interface Easy 2 and 4 digit addressing. Smooth speed control. Run multiple trains at once without blocking! Run up to 20 addresses at the same time on your system. Run up to 20 throttles at the same time on your system.   Jump Ports for using DC power packs as additional throttles Use one or two smooth DC power packs as throttles to control DCC equipped locomotives. Simple, cost effective way to add more throttles to your Zephyr Express set. Makes it easy to share the fun of DCC with layout visitors and young operators. Functions on locos controlled by Jump throttles remain active. Over 9000 Locomotive Addresses Use Address 00 to run one or more locos without DCC decoders Two Digit Addressing is easy to use. (Address 01-127) Four Digit Addressing-use the number painted on your engines as its address.   3.0 Amps of Power to run multiple trains. Booster outputs 13V DC for safe operation in N and HO scales. Function Control Control lights and sound with 29 functions (F0-F28) Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down. Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder). Stationary Decoders, Turnout Control & Turnout Position Reporting Access to stationary decoder control for turnouts and other devices. Control 2000+ stationary decoder addresses. Consisting Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos. Advanced consisting, allows only advanced consist capable mobile decoders. Basic consisting, program decoders to run on same address. Decoder Programming Built in read/write programmer that can read and write all CVs. Supports Direct programming (Digitrax preferred method). Also supports paged & register mode programming. Operations mode programming can be used to program decoders on the layout. Expandability with Digitrax LocoNet Use Zephyr Express as a starting point for your Digitrax LocoNet System, then add components. Use Zephyr Express as an expansion set with Digitrax equipment you already have installed. Add Radio or IR via LocoNet. Just plug-in a UR90, or UR92 receiver and add IR and/or Radio throttles. Comes Complete with DCS52 Command Station, PS314 Power Supply, and System Reference Manual. More Information Item # ZEPE / DCS52  Brand Digitrax Scale Multi Scale MSRP 245.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Zephyr Express Manual V2 /Quickstart Guide / Decoder Manual V2 / Specification Sheet / Zephyr Express Manual V1

Read more less

The foam protects your locomotives and cars upside down or right side up. You can work on them and not damage the paint or details. For HO Scale models Dimensions: 6"w x 11"

Read more less

The NixTrainz Decoder Buddy V5B (2.2K Ohm, 8 Outputs) offers versatile mounting options, replacing QSI or Dual Mode decoder boards with ease. This mother board includes a dedicated pad for the white control wire of the Power Pack, positioned for effortless soldering. Ideal for LED lighting, it ensures simplified connections for model train enthusiasts. Note: Requires 21 Pin Decoder and soldering. Dimensions: 0.67" x 2.20" x 0.35".

Read more less

The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications.  there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is  NOT INTENDED FOR USE IN A DC SYSTEM. The mother board includes:  One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".)  It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!!  The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation.  Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)

Read more less

The TSU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and InterMountain Models. It is suitable for a wide variety of models from HO to S scale. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive brakes, and train brakes. We also offer a large selection of selectable sound effects including: prime movers (up to 12), bells (12), airhorns (40+) and more! This decoder includes a connector to easily add a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.

Read more less

The Econami ECO-21PNEM 1-amp Digital Sound Decoder simply plugs into models equipped with an NEM-supported 21-pin socket. The ECO-21PNEM can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Diesel Dimensions: 30.5 x 15.5 x 6.55mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 12

Read more less

Static-Tac is specially formulated and has the right viscosity for adhering Static Grass and Briar Patch. It comes in a bottle with a graduated tip that works for large or small areas. Static-Tac is an easy-to-spread adhesive that dries to a clear matte finish for realistic results.

Read more less

Static Grass 42 grams Grass length: 4mm

Read more less

This small oval speaker is ideal for narrow hood diesels. Dimensions: 35 x 16 x 8mm(D)Frequency Response: 250Hz – 13kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

Read more less

An entire DCC system in the palm of your hand! The Power Cab system can operate one or two HO locomotives. The Power Cab provides all of the capability and ease of use that you’ve heard about in the NCE Power Pro system, at an entry level price.Installation is a snap. Hook two wires to your track and plug in the cab. You’re off and running trains!The Power Cab kit contains: Power Cab 7' Power Cab Cable PCP Power Panel Power Supply Pro Cab Coiled Cord Manual. More Information Item # 0025 Scale Multi Scale

Read more less

Static Grass 70 grams Grass length: 2mm

Read more less

The easy-to-build Walthers Cornerstone HO Scale Merchant's Row I kit brings together five different stores in one structure at a dynamite price. Often just a few blocks away from the railroad tracks, the business district is one of the most important parts of any small town or big city. This unique kit combines five storefronts into one space-saving structure that fits on almost any HO Scale layout. Add your personal touch to Merchant's Row I with paint and the supplied full-color decals to create a one-of-a-kind model for your steam or diesel-era scene. Merchant's Row I is one of many Cornerstone HO Scale businesses. As shown the kit measures: 11 x 5 x 4" or 27.5 x 12.5 x 10cm  Five complete stores under one roof Fits 1880s to present Perfect for small town or big city Use with other Cornerstone stores to model a complete business district Colorful decal signs for a variety of businesses Molded in two colors and clear plastic

Read more less