Oxford Diecast 87CP65007 is a 1:87 scale model of the 1965 Chevrolet Stepside Pickup, a popular classic car. Featuring realistic detail and faithful representation, this diecast model will impress any auto enthusiast. This HO Scale 1965 Chevrolet Stepside Pickup from Oxford Diecast features a die cast metal body, window glazing, interior seats and realistic decoration. This tricked-out truck is great for adding detail to your 1960s and later HO Scale street scenes.

Read more less

HO Scale Metal pole and arms LED lights for low current drain Ready to use with resistors attached Designed for easy mounting 3 lights in the package Voltage Requirements: 14 to 18 volts AC or DC

Read more less

HO Scale Metal pole and arms LED lights for low current drain Ready to use with resistors attached Designed for easy mounting 3 lights in the package Voltage Requirements: 14 to 18 volts AC or DC

Read more less

Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these WalthersProto(R) models! Introduced in the mid-1970s especially to carry automobiles, the protoypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89' flatcars with sidesill cut-outs and 28" wheels for added clearance. In service all across North America, the racks carry the owner's logos, and most ride on flatcars leased from TTX with ETTX reporting marks. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature: Limited edition - one time run of these numbers! Prototypes in service from the 1970s to the present Factory-installed grab irons Separately molded and applied side ladders Ultra-smooth rolling metal axles with correct 28" wheels Proto MAX(TM) metal knuckle couplers  PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24" radius is recommended for operation.

Read more less

Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these WalthersProto(R) models! Introduced in the mid-1970s especially to carry automobiles, the protoypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89' flatcars with sidesill cut-outs and 28" wheels for added clearance. In service all across North America, the racks carry the owner's logos, and most ride on flatcars leased from TTX with ETTX reporting marks. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature: Limited edition - one time run of these numbers! Prototypes in service from the 1970s to the present Factory-installed grab irons Separately molded and applied side ladders Ultra-smooth rolling metal axles with correct 28" wheels Proto MAX(TM) metal knuckle couplers  PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24" radius is recommended for operation.

Read more less

Over half of all new autos make their first long trip by train, riding in enclosed tri-level auto rack cars like these WalthersProto(R) models! Introduced in the mid-1970s especially to carry automobiles, the protoypes consist of an enclosed rack with three decks. As some of the tallest cars in service, the racks are mounted on low-level 89' flatcars with sidesill cut-outs and 28" wheels for added clearance. In service all across North America, the racks carry the owner's logos, and most ride on flatcars leased from TTX with ETTX reporting marks. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature: Limited edition - one time run of these numbers! Prototypes in service from the 1970s to the present Factory-installed grab irons Separately molded and applied side ladders Ultra-smooth rolling metal axles with correct 28" wheels Proto MAX(TM) metal knuckle couplers  PLEASE NOTE: As the Walthers Auto Rack is the correct prototype length, a minimum 24" radius is recommended for operation.

Read more less

#212 HO Scale Talgo Truck Adaptors24 per packageUse the #230 Talgo Insertion Pic to insert #212 Talgo Adaptors into Talgo Truck coupler pockets.Talgo Truck Adaptors work with Kadee NO.5®, #58, 20-series couplers (#21, #22, #23, #24, #28, #26, #27, #28, #29) and all Whisker® couplers.To check coupler height, set the coupler into the talgo truck pocket and hold it level as possible and check the coupler height with a #205 or newer #206 HO coupler height gauge.NOTE: So it is important to check coupler height and make sure it is correct "before" you insert the talgo truck adaptor, because it's almost impossible to remove without breaking something.Once the coupler height is correct press the #230 insertion pick into the top of the #212 adapter. Make sure the pivoting hole of the coupler is over the little pin on the end of the flexible arm in the pocket. The adapter goes down through the top of the pocket and twists downward until it snaps under the two plates on top of the pocket. The adapter becomes the new pivoting post and locks the coupler in place.

Read more less

Make your HO Scale train set more fun in minutes with these Insulated Boxcars from WalthersTrainline featuring: Fully assembled, ready for fun! Built tough for years of dependable service Add to the fun of any HO train set Colorful paint and lettering schemes Body-mounted magnetic knuckle couplers RP-25 metal wheels

Read more less

Bring the power of today's railroading to your HO layout with the WalthersMainline General Electric Evolution series diesels. Introduced in 2005 to comply with tougher emission standards, and more known among railfans and modelers as GEVOs, these big engines have quickly become one of the most popular locos worldwide. Designated as the ES44 (Evolution Series, 4,400 horsepower), prototype variations in North American service include locos with DC or AC traction motors and buyers have also specified center idler axles, as well as high adhesion or steerable trucks. Features of the models include: Limited edition - one time run of these roadnumbers! Model today's railroading at WalthersMainline prices The most popular prototype diesel in North America Thousands in service from 2005 to the present Correct profile radiator grilles & roof-top walkway surface details Easily handles 18" radius curves (22" or larger recommended) Six powered axles per unit LED Lighting includes: High or low headlight per prototype Working front ditch lights Three truck styles to match prototypes: Standard high-adhesion Steerable C4 A1A center idler axle Fully assembled Same powerful drive as WalthersProto(R) locos featuring: Five-pole skew-wound motor 14:1 gear ratio Helical-cut gears for quiet operation and easy multiple unit operation All-wheel drive and electrical pickup Dual machined brass flywheels Heavy die-cast metal chassis Constant and directional lights Add grab irons to your model with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately) RP-25 metal wheels Proto MAX(TM) metal knuckle couplers Model features low headlight, C4 A1A trucks and 2-vent dynamic brake details.

Read more less

A Trackside Business for Every EraThe Walthers Cornerstone Clayton County Lumber is a model of one of the most common trackside businesses. From tiny town to big city, small trackside warehouses are used by companies of every size and kind because they provide a handy place to store and protect merchandise shipped or delivered by rail. This versatile kit features four separate corrugated-metal buildings that are perfect for your steam or diesel-era railroad. Split them up and use them in several places along your railroad, or combine them into larger facilities. One building has an angled end wall to fit inside or outside a curved siding so it can be used in odd-shaped spaces. Signs for several businesses are also included in the Clayton County Lumber kit.  Four corrugated-metal buildings with positionable doors One building with an angled wall allows easy placement along curved sidings Signs for several businesses Molded in appropriate colors Easy-to-build plastic kit   Building 1: 4 x 4-1/2 x 3" or 10 x 11.2 x 7.5cm, Building 2: 9 x 4-1/4 x 3-1/2" or 22.5 x 10.6 x 8.7cm, Building 3: 5-3/4 x 3-1/4 x 2-5/8" or 14.3 x 8.1 x 6.5cm, Building 4: 5-3/4 x 3-3/8 x 3-1/2" or 14.3 x 8.4 x 8.7cm

Read more less