HO Scale
Woodland Scenics Woodland Scenics 613 | Static Grass Dark Green 2mm | Multi Scale
Static Grass 70 grams Grass length: 2mm
£3.72
Woodland Scenics Woodland Scenics 5700 | Just Plug Lighting System - Lights & Hub Set | Multi Scale
All you need is power! This is the quickest and easiest way to add lights to any project. Use the individual dimmer controls to regulate light brightness. Add an optional Auxiliary Switch for convenient operation. Powering Your Light System- You will need one Just Plug Power Supply (JP5770 US, JP5771 Euro, JP5772 UK or JP5773 Aus/NZ) to power up to 50 lights on your light system, or if you want to power your system from a train power pack, purchase Connecting Cables (JP5760). RoHS compliant
£12.79
SoundTraxx SoundTraxx 882006 | Econami ECO-21PNEM (1-amp) Digital Diesel Sound Decoder | HO Scale
The Econami ECO-21PNEM 1-amp Digital Sound Decoder simply plugs into models equipped with an NEM-supported 21-pin socket. The ECO-21PNEM can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches. Product Specifications: Sound Profile: Diesel Dimensions: 30.5 x 15.5 x 6.55mm Max. Motor Stall Current: 1A Max. Function Current: 100mA (each output) Function Outputs: 6 Audio Amplifier: 2 Watt, 8-Ohm Load DCC Track Voltage: 7.5V – 22V Sound Channels: 12
£55.05
SoundTraxx SoundTraxx 810123 | NMRA 8-pin Connector (set of 4)
This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.
£9.04
Woodland Scenics Woodland Scenics 623 | Static Grass Light Green 7mm | Multi Scale
Static Grass 42 grams Grass length: 7mm
£3.72£3.35
Woodland Scenics Woodland Scenics 5740 | Just Plug Lighting System | Warm White LED Stick-On Lights
2 lights with 24" (60.9 cm) cable/pkg - 25mA each
£6.47
Woodland Scenics Woodland Scenics 640 | Model-Vac | Multi Scale
The Model-Vac is the perfect strength for picking up loose landscaping material but still leaves glued items behind. This cordless modeling vacuum features an ergonomic design and can access small areas. The Model-Vac is easy to empty and does not cause damage to excess material so it can be used again. Batteries not included.
£16.18
Woodland Scenics Woodland Scenics 628 | Static Grass Straw 12mm | Multi Scale
Static Grass 28 grams Grass length: 12mmm
£3.64£3.27
Woodland Scenics Woodland Scenics 620 | Static Grass Straw 4mm
Static Grass 42 grams Grass length: 4mm
£3.65£3.28
SoundTraxx SoundTraxx 810112 | 25 x 14mm Oval 8-ohm Speaker
This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium. Dimensions: 25 x 14 x 5.2mm(D)Frequency Response: 300Hz – 20kHzPeak Power: 1.5 WattsImpedance: 8 Ohms
£10.34
Woodland Scenics Woodland Scenics 625 | Static Grass Dark Green 12mm | Multi Scale
Static Grass 28 grams Grass length: 12mmm
£3.72£3.35
NixTrainz NixTrainz | Decoder Buddy Mini (2.2k Ohm Resistors Onboard)
The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. there has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board requires soldering. These printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM. The mother board includes: One 21 Pin Decoder receptacle Two pairs of track input pads One pair of motor input pads One set of stay alive pads (U+ , GND and if necessary a third control wire ) One pair of speaker pads Resistors for use with LED lighting. (Also available with 0 ohm, 750 ohm and custom specified resistors for function outputs. This accommodates some previously installed and "12 volt LEDs".) It is IMPORTANT to realize that resistors must be used when LEDs are connected to the four lighting outputs of the Mini!!! The resistors may be soldered in line when purchased or the included resistors may be soldered inline upon installation. Remember there are different incandescent lamp voltage requirements and current draw that have to be taken into consideration also. (Until the next batch is produced the Mini will be labeled Tiny and the picture on the package will indicate the correct headlight outputs for direction of locomotive.)
£8.90
