Baldwin & Others
Train Control Systems Train Control Systems (TCS) 1533 | WOW101-KA-Diesel | HO Scale
CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Keep-Alive®: Included on-board for smooth, stutter-free operation. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notch™: A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type: Hard-Wire, Direct-Plug (9-Pin JST) Dimensions (L x W x H): 1.35″ x 0.658″ x 0.22″ or 34.29mm x 16.72mm x 5.59mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 6 Function Rating: 100 mA 12V Outputs: 6 Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.
£101.40£91.27
Train Control Systems Train Control Systems (TCS) 1527 | WOW121-Diesel
CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notch™: A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type: Direct-Plug (21-Pin MTC) Dimensions (L x W x H): 1.28″ x 0.689″ x 0.22″ or 32.5mm x 17.5mm x 5.6mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 8 Function Rating: 100 mA 12V Outputs: 8 Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.
£77.99
Digitrax Digitrax SDXH187MT | Series 7 Sound Decoder | HO Scale
The Digitrax SDXH187MT is the perfect addition to your HO scale model trains. With its Series 7 Sound Decoder, this product provides realistic and high-quality sound experience. Being an industry leader, Digitrax guarantees superior performance and compatibility for your model trains. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDXH187MT Brand Digitrax Scale HO Scale MSRP $65.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£42.27
Digitrax Digitrax SDH187MT | Series 7 Sound Decoder | HO Scale
This Digitrax SDH187MT is a high-quality Series 7 Sound Decoder designed for HO Scale models. With advanced sound technology, this decoder brings realistic audio to your train layout. Its compact design and easy installation make it a must-have for any model train enthusiast. 2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer More Information Item # SDH187MT Brand Digitrax Scale HO Scale MSRP $55.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£35.77
Digitrax Digitrax SDH167D | Series 7 Sound Decoder | HO Scale
The Digitrax SDH167D is a powerful and versatile sound decoder designed for HO scale model trains. With advanced features such as Series 7 sound technology, this decoder delivers high-quality sound effects and enhances your model railroad experience. Easy to install and compatible with most DCC systems. 2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker 300uF Capacitor More Information Item # SDH167D Brand Digitrax Scale HO Scale MSRP 49.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£31.86
Train Control Systems Train Control Systems (TCS) 1530 | WOW101-Diesel | HO Scale
CD-Quality Sound: TCS’ world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. Audio Assist®: TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV’s! User-Loadable Speed Tables: Configure custom speed curves and set speed limits. Throttle Modes: Choose from multiple throttle modes to meet your operating needs. Proto Notch™: A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values. Specs Interface Type: Hard-Wire, Direct-Plug (9-Pin JST) Dimensions (L x W x H): 1.35″ x 0.658″ x 0.22″ or 34.29mm x 16.72mm x 5.59mm Scale: HO Scale Continuous/Peak: 1.3/2.0 Amp Total Functions: 6 Function Rating: 100 mA 12V Outputs: 6 Speaker Selection This decoder is optimized for 8 Ω speakers (not included). This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress. Speaker enclosures greatly increase speaker performance in most cases.
£85.75£77.17
Digitrax Digitrax SDXH167D | Series 7 Sound Decoder | HO Scale
Upgrade your model trains with the Digitrax SDXH167D series 7 sound decoder for HO Scale. Expertly designed with advanced technology, this decoder delivers clear and realistic sound effects for an immersive experience. Enjoy precise control and enhanced functionality with this top-notch decoder. 8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin sound harness with 8 Ohm 16 x 26 x 9mm Box Speaker 300uF Capacitor More Information Item # SDXH167D Brand Digitrax Scale HO Scale MSRP $59.00 TCA Grading C-10 Mint - Brand New Availability In-Stock/Restockable Manuals Instruction Sheet
£38.37